NHT SW3S دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

SW3S Subwoofer
Owner’s Manual
Thank you for your purchase of the NHT Model SW3S Subwoofer. Please take a few minutes to read through this Owner’s
Manual prior to installing your new subwoofer. The information provided can help you to obtain maximum performance
from your audio system. If you have questions or need assistance at any time during the installation or operation of your
new subwoofer, please call your NHT Dealer or our Toll-Free Customer Hotline at:
1-800-NHT-9993
Please retain the

ملخص المحتوى في الصفحة رقم 2

er, we suggest you use 12 AWG or larger wire. For specialty wire considerations, consult your local Authorized NHT Dealer. Prepare your speaker wire by stripping 1/4” to 3/8” of insulation from the ends and twisting the exposed wire strands tightly. The five-way binding posts on the back of the SW3S will accept raw wire, banana plugs or spade plugs. Tighten the binding posts by hand, as pliers can strip or break them. Be sure to wire the subwoofer “in phase”. That is, the positive (red) term