Infinity Systems Inc.6810cs دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

s
n
o
i
t
c
u
r
t
5010cs,6010cs,6810cs
reference series
s
n
i

ملخص المحتوى في الصفحة رقم 2

INSTALLATIONWARNINGS ANDTIPS INSTALLATION THANK YOU for purchasing Infinity’s Reference • Always wear protective eyewear when using Figure 1. Mounting the 5010cs woofer with Figure 3. Mounting the 6010cs in 165mm speaker Series automotive loudspeaker components. any tools. the grille. locations. We’ve organized this manual to make your • Turn off all audio systems and other electrical installation as simple and trouble-free as possible. devices before you start. Disconnect the (–) Please read i

ملخص المحتوى في الصفحة رقم 3

INSTALLATION FLUSH-MOUNT TWEETER ANGLE Figure 7A. Behind grille panel. Figure 7C. Mounted to grille panel. Figure 5A. Mounting the tweeter using the Figure 6. I-Mount™ (patent no. 5,859,917) flush-mounting kit. 3 ROTATE ENTIRE ASSEMBLY 3 TO AIM ANGLED TWEETER TOWARD LISTENER. 1 SLIDE SCREW UP OR DOWN TO ADJUST TWEETER ANGLE. 1 2 Note: Aim the tweeter at the listening position by Figure 7B. Mounted to surface behind Figure 7D. In-dash location (may require gluing). 2 sliding the stud in

ملخص المحتوى في الصفحة رقم 4

CONNECTIONS SPECIFICATIONS Connect the speakers to the crossover and 5010cs 6810cs the crossover to the amplifier, observing proper Type: 5-1/4" 2-Way Component System Type: 6" x 8"/5" x 7" 2-Way Component System polarity. Speaker Impedance: 4 Ohms Speaker Impedance: 4 Ohms Power Handling: 75W RMS, 225W Peak Power Handling: 90W RMS, 270W Peak Frequency Response: 67Hz – 21kHz Frequency Response: 49Hz – 21kHz Figure 8A. Sensitivity (2.83V, 1m): 91dB Sensitivity (2.83V, 1m): 92dB p/s 050 Crossover