Infinity Systems Inc.50.5CS دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

kappa series
50.5cs,60.5cs,
65.5cs
instructions
Thank you for purchasing Infinity’s Kappa Series
automotive loudspeaker components. We’ve organized this manual
to make your installation as simple and trouble-free as possible.
Please read it thoroughly before proceeding. Remember to keep
your sales receipt with this manual in a safe place so both are
available for future reference.

ملخص المحتوى في الصفحة رقم 2

INSTALLATION WARNINGS AND TIPS INSTALLATION ABOUT THESE INSTRUCTIONS INSTALLATION TIPS Figure 1. Mounting the 50.5cs woofer with Figure 3. Mounting the 60.5cs woofer in a standard Installation of automotive stereo components • Always wear protective eyewear when using the grille. speaker location. A variety of adapter rings are can require extensive experience with a variety any tools. supplied to fit many installation configurations. of mechanical and electrical procedures. Although •Turn off

ملخص المحتوى في الصفحة رقم 3

INSTALLATION CONNECTIONS Figure 6. Mounting the tweeter using the Figure 5A. Mounting the tweeter using the Open the crossover housing by placing your Infinity Kappa component crossovers include a ™ I-Mount™ surface-mounting kit. I-Mount flush-mounting kit. fingers between the terminals and the top cover, “Custom Contour™” adjustment. Custom Contour, and gently pulling off the cover. Using screws or if enabled, will reduce the midrange output from a wire tie, mount the crossover through the ho

ملخص المحتوى في الصفحة رقم 4

SPECIFICATIONS 50.5cs 60.5cs 65.5cs Type: 5-1⁄4" 2-Way Component Type: 6-1⁄2" 2-Way Component Type: 165mm 2-Way Component Crossover Frequency: 3.5kHz Crossover Frequency: 3.5kHz Crossover Frequency: 3.5kHz Woofer Woofer Woofer Speaker Impedance: 4 ohms Speaker Impedance: 4 ohms Speaker Impedance: 4 ohms Power Handling: 85W RMS, 255W Peak Power Handling: 90W RMS, 270W Peak Power Handling: 90W RMS, 270W Peak Sensitivity: 90dB @ 2.83V, 1m Sensitivity: 90dB @ 2.83V, 1m Sensitivity: 90dB @ 2.83V, 1m