Bogen ASWG1DK دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Amplified Speakers
Models AS1, ASWG1, and ASWG1DK
Installation and Use Manual
Description
Bogen’s self-amplified ceiling speakers are 8-inch, cone-type loudspeakers, complete with built-in amplifier and
volume control.
Power Power
Model Style Mounting Accessories
Requirements Rating
Unmounted Cone Speaker with 1W Amplifier and Grilles: CG8A, CG8AW,
AS1
Volume Control SG8W, PG8A, PG8W
AS1 Mounted onto Steel Ceiling Grille (PG8W) with 1 CU
ASWG1 1W
Fixed, Center Volume Control Knob (50 mA)
TB8, R

ملخص المحتوى في الصفحة رقم 2

TB8 Only Installation 1. Place ceiling tile with the finished side facing up over a large trash can (to provide support and save cleanup time). 2. Cut hole in the center of the ceiling tile, using the raw speak- er as a guide. 3. Position the tile bridge on the unfinished side of the ceiling tile and bend (4) locator tabs into tile opening to prevent sliding. 4. Install Ceiling Speaker assembly using (4) 8-32 screws and the threaded holes of the tile bridge as shown. (Screws are provided with Ce