AudioSource MTM In-Wall Cinema دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

AS515
MTM In-Wall Cinema Speaker
above and below the desired speaker location. After selection
Congratulations on your purchase of the AudioSource
of the mounting location, mark the hole to be cut out. A handy
AS515 MTM In-Wall Cinema Speaker. This product is
cardboard template is included with your AS515 speaker for
designed to reproduce the audio portion of your home
your convenience. Locate and level the template, then mark
entertainment system with accuracy and detail that will
with

ملخص المحتوى في الصفحة رقم 2

Installing the AS515 It is now time to connect the speaker wire to the AS515. Your speaker wire is usually coded to maintain proper system phasing. This can be by color coding, or one conductor may have a printed marking or a rib along one edge that will not be found on the other. Identify which type of polarity coding that your wire is using. You must carefully observe that the positive terminal of the speaker output on your amplifi er is connected to the positive terminal of the AS515 sp

ملخص المحتوى في الصفحة رقم 3

Removing the AS515 Speaker AS515 SIDE VIEW Should it ever become necessary to remove the AS515 speaker from the wall, simply remove the grill and turn the six mounting screws counter-clockwise until the doglegs lock out of position in their resting seats. Grill removal The grill uses a pressure fi t relying on the contact of both surfaces to hold it in place. If the grill becomes distorted it becomes diffi cult to remove or reinstall. Proper care should be taken to not distort its shape wh

ملخص المحتوى في الصفحة رقم 4

AS515 Specifi cations Woofers 5.25” Poly Cone w/Butyl Rubber Surround Tweeter 1” Fabric Dome Frequency Response 60 Hz to 20 kHz Impedance 8 Ohm Sensitivity 90dB@2.83V Recommended Amp Power 25 to 150 Watts Continuous Outer Dimension 15 3/8” x 8 5/16” (390mm x 210mm) Cut Out Dimension 13 15/16” x 6 7/8” (354mm x 175mm) Two Year Limited Warranty AudioSource, a division of Rodin, warrants this product against defects in materials and workmanship for a limited period of time. For a period of two