ملخص المحتوى في الصفحة رقم 1
MIDAS experiment „alc“
USER MANUAL
SR35, 05.07.2006
Data acquisition is running on psw407 (DELL Power Edge 2600).
AFS users can logon to pc5145, the local user account is l_musr_alc.
Data files are stored locally on psw407 in /home/l_musr_alc/exp/alc and
automatically copied to /afs/psi.ch/project/bulkmusr/data/alc/ti
ملخص المحتوى في الصفحة رقم 2
start web browser: http://psw407:8080 (PSI only!): Status page (the following screenshots are taken from pc4244…) DO NOT USE ‘Konqueror’ !!!! (only IE, Mozilla, or Firefox)
ملخص المحتوى في الصفحة رقم 3
Start a run for autorun sequence: set autorun_active = 1 (if 0: only single run) there are no ‘scans’ anymore!
ملخص المحتوى في الصفحة رقم 4
Stop a run Do not interfere the stopping procedure – wait until the pages refreshes and shows status ‘stopped’.
ملخص المحتوى في الصفحة رقم 5
Set Magnet change Demand value read Hall probe read NMR probe - field >= 0.0 * - probe is locked * - readout unit is Tesla * - sum of returned errors (returned value < 0.0) * status unit * -1.0 BUS DRIVER I/O TIMEOUT I * -2.0 BUS DRIVER ERROR B * -4.0 not in state LOCKED !L * -8.0 state NOT LOCKED N * -16.0 state WRONG W * -32.0 state NMR signal S * -64.0 unit
ملخص المحتوى في الصفحة رقم 6
Set Temperature LTC21: Input: read values Output: set value LTC21_Analog_Set_Point (K)
ملخص المحتوى في الصفحة رقم 7
Set Flow Demand = 3000 for T = 0 – 100 °C, set Demand = 10000 for cooling down, base temp. ???
ملخص المحتوى في الصفحة رقم 8
History
ملخص المحتوى في الصفحة رقم 9
ODB: DO NOT TOUCH! – discuss with Instrument Scientist first Start frontends from terminal by running the command alc_start_midas Shutdown all frontends: alc_mcleanup [l_musr_alc@pc4244 alc]$ alc_mcleanup Midas cleanup procedure for experiment ALC... Stopping MIDAS clients... 09:48:00 [ODBEdit] Program ODBEdit on host pc4244 stopped 09:48:00 [IPS120 SC] Program IPS120 SC on host pc4244 stopped 09:48:00 [alc_fe] Program alc_fe on host pc4244 stopped 09:48:00 [HALL_SCfe] Program H
ملخص المحتوى في الصفحة رقم 10
mozilla-bin: no process killed killing opera... opera: no process killed Cleaning up shared memory segments for user l_musr_alc ... Cleaning up semaphores for user l_musr_alc ... ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status 0x00000000 0 root 777 49152 1 ------ Semaphore Arrays -------- key semid owner perms nsems 0x4d05c027 0 l_musr_al 666 1 ------ M
ملخص المحتوى في الصفحة رقم 11
Separator: vncviewer sepii:0, pw: exhalle - if only black screen appears use rdesktop sepii, user: halle, pw: exhalle under winXP: Remote Desktop Connection (All Programs – Accessories – Communications) for HV = 150 kV: SEP = 746 The beamline setting is named ALC2005_1st_period.set.
ملخص المحتوى في الصفحة رقم 12
Data written as ASCII file: alc_05_NNNN.dat (run number NNNN) format: 19 header lines followed by data, lines containing 48 coloumns each !File: /home/l_musr_alc/exp/alc/alc_05_0270.dat !Run : 270 !Start/Stop time: 01:25:32 (30-04-2005) / 06:55:08 (30-04-2005) !Comment: cell 107, 15% DHTAC / 50 mole% ortho-chlorobenzoate, 35C !Field [T]: prescan = 1.5000; from = 1.5500; to = 2.3000; step = 0.0005 !Temperature (cold finger) : T1 = 346.503 K; dT1 = 0.029 K !Temperature (s
ملخص المحتوى في الصفحة رقم 13
Appendix: Some ODB entries Ip_min is the minimum required beam currenton Target E in mA. Measurement is paused when the current is lower. rate_min is the minimum required positron rate in the sum of the backward counters (this makes sure that the run is automatically paused when the beamblocker is closed). TestRun = ‘n’ writes datafile ‘alc_05_NNNN.dat’ TestRun= ‘y’ writes ‘test_alc_05_NNNN.dat’
ملخص المحتوى في الصفحة رقم 14
Ip_channel is the channel number (starting at 0, in the above example this is the third channel) of the proton beam current signal, 100 kHz correspond to 1 mA. preset channels is the bitmask for the scaler channels used for the preset counting register in hex form. In the above example this is the proton current (equivalent to rd counting for a certain number of incoming muons). 3 channel has bitmask 0100, represented by 0x4 in hex code. preset_value is the number of counts per field
