ملخص المحتوى في الصفحة رقم 1
HP ProLiant DL320 Generation 4 Server
User Guide
November 2005 (First Edition)
Part Number 394179-001
ملخص المحتوى في الصفحة رقم 2
© Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows, and Windows NT are U.S. registered trademark
ملخص المحتوى في الصفحة رقم 3
Contents Server component identification...................................................................................................... 6 Front panel components ............................................................................................................................. 6 Front panel LEDs and buttons ...................................................................................................................... 7 Rear panel components...........................
ملخص المحتوى في الصفحة رقم 4
Removing a hard drive blank .......................................................................................................... 29 Removing hard drives .................................................................................................................... 29 Installing hard drives...................................................................................................................... 30 Optical drive assembly option...........................................
ملخص المحتوى في الصفحة رقم 5
Diagnostic steps...................................................................................................................................... 58 Start diagnosis flowchart ................................................................................................................ 58 General diagnosis flowchart ........................................................................................................... 59 Power-On Problems Flowchart.................................
ملخص المحتوى في الصفحة رقم 6
Server component identification In this section Front panel components ............................................................................................................................ 6 Front panel LEDs and buttons..................................................................................................................... 7 Rear panel components............................................................................................................................. 8
ملخص المحتوى في الصفحة رقم 7
Front panel LEDs and buttons Item Description Status 1 UID button/LED Blue = Identification is activated. Flashing blue = System is being remotely managed. Off = Identification is deactivated. 2 Internal health LED Green = System health is normal. Amber = System is degraded. To identify the component in a degraded state, refer to system board LEDs (on page 11). Red = System critical. To identify the component in a critical state, refer to system board LEDs (on page 11). Off = S
ملخص المحتوى في الصفحة رقم 8
Rear panel components Item Description 1 PCI-X expansion slot 2, full-length (optional PCI Express slot 1) 2 PCI Express expansion slot 1, low-profile, half-length 3 Power supply 4 UID button/LED 5 10/100/1000 NIC 2 6 10/100/1000 NIC 1 7 iLO 2 management port 8 Serial connector 9 Keyboard connector 10 Mouse connector 11 Video connector 12 USB connectors (2) Server component identification 8
ملخص المحتوى في الصفحة رقم 9
Rear panel LEDs and buttons Item Description Status 1 iLO 2 activity Green = Activity exists. Flashing green = Activity exists. Off = No activity exists. 2 iLO 2 link Green = Link exists. Off = No link exists. 3 10/100/1000 Green = Link exists. NIC 1 activity Flashing green = Activity exists. Off = No link exists. 4 10/100/1000 Green = Link exists. NIC 1 link Off = No link exists. 5 10/100/1000 Green = Activity exists. NIC 2 activity Flashing green = Activity exists. Off =
ملخص المحتوى في الصفحة رقم 10
System board components Item Description Item Description 1 System maintenance switch 12 Fan 2 connector 2 NMI switch 13 Fan 1 connector 3 Battery 14 Main power connector 4 Hard drive connector 1 15 Processor socket 5 Hard drive connector 2 16 Auxiliary power connector 6 Front panel LED board 17 DIMM slot 4 (Bank B) connector 7 Front USB connectors (2) 18 DIMM slot 3 (Bank B) 8 Fan 4 connector 19 DIMM slot 2 (Bank A) 9 Optical drive connector 20 DIMM slot 1 (Bank A) 10 Disket
ملخص المحتوى في الصفحة رقم 11
Position Default Function S5 Off Off = Power-on password enabled On = Power-on password disabled * S6 Off Off = Normal operation On = BIOS will clear CMOS and NVRAM * S7 Off Reserved S8 Off Reserved * "On" activates the function. NMI switch The NMI switch allows administrators to perform a memory dump before performing a hard reset. Crash dump analysis is an essential part of eliminating reliability problems, such as hangs or crashes in operating systems, device drivers, and a
ملخص المحتوى في الصفحة رقم 12
Item LED Description Status 2 System fan module Amber = One fan in this module has failed. Red = Multiple fans in this module have failed. Off = All fans in this module are operating normally. 3 Overtemperature Amber = System has reached a cautionary or critical temperature level. Off = Temperature is OK. 4 Processor Amber = Processor has failed. Off = Processor is operating normally. 5 PPM Amber = PPM has failed. Off = PPM is operating normally. 6 DIMM 4 Amber = DIMM has failed.
ملخص المحتوى في الصفحة رقم 13
System LED and Color Internal Health Status LED Color Amber • DIMM in slot X has reached single-bit correctable error threshold. • DIMM in slot X is in a pre-failure condition. • DIMM in slot X is an unsupported type, but valid memory exists in another bank. DIMM failure, all slots Red No valid or usable memory is installed in the system. in one bank (Amber) Overtemperature Amber The Health Driver has detected a cautionary temperature (Amber) level. Red The server has detected a h
ملخص المحتوى في الصفحة رقم 14
SATA and SAS device numbers Item Description 1 Device 1 2 Device 2 Fan assembly location Server component identification 14
ملخص المحتوى في الصفحة رقم 15
Server operations In this section Powering up the server ........................................................................................................................... 15 Powering down the server ....................................................................................................................... 15 Preparation procedures........................................................................................................................... 16 Extending th
ملخص المحتوى في الصفحة رقم 16
Preparation procedures To access some components and perform certain service procedures, you must perform one or more of the following procedures: • Extend the server from the rack, if applicable ("Extending the server from the rack" on page 16). If you are performing service procedures in an HP, Compaq branded, telco, or third-party rack cabinet, you can use the locking feature of the rack rails to support the server and gain access to internal components. For more information about te
ملخص المحتوى في الصفحة رقم 17
4. Loosen the thumbscrews that secure the server faceplate to the front of the rack. 5. Extend the server from the rack ("Extending the server from the rack" on page 16). 6. Disengage the server from the rack. For more information, refer to the documentation that ships with the rack mounting option. 7. Place the server on a sturdy, level surface. Removing the access panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system comp
ملخص المحتوى في الصفحة رقم 18
5. Remove the PCI riser board assembly. Installing the PCI riser board assembly CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI riser board assembly. 1. Install the PCI riser board assembly. 2. Install the access panel ("Installing the access panel" on page 17). 3. Install the server into the rack ("Installing the server into the rack" on page 25). Removing the fan assembly
ملخص المحتوى في الصفحة رقم 19
4. Remove the air baffle. 5. Disconnect the fan cables from the system board. 6. Remove the fan assembly. Server operations 19
ملخص المحتوى في الصفحة رقم 20
Installing the fan assembly 1. Install the fan assembly. 2. Connect the fan cables to the system board. 3. Install the air baffle. 4. Install the access panel ("Installing the access panel" on page 17). 5. Install the server into the rack ("Installing the server into the rack" on page 25). Server operations 20
