ملخص المحتوى في الصفحة رقم 1
ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL
INSTALLATION GUIDE
AXIS P3301 Fixed Dome Network Camera
AXIS P3301-V Fixed Dome Network Camera
ملخص المحتوى في الصفحة رقم 2
About this Document Equipment Modifications This document includes instructions for installing the This equipment must be installed and used in strict AXIS P3301/-V on your network. Previous experience of accordance with the instructions given in the user networking will be beneficial when installing the documentation. This equipment contains no product. user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable Legal Considerations regul
ملخص المحتوى في الصفحة رقم 3
ENGLISH AXIS P3301/-V Installation Guide Page 3 AXIS P3301/-V Installation Guide This installation guide provides instructions for installing the AXIS P3301 / AXIS P3301-V Fixed Dome Network Camera on your network. For all other aspects of using the product, please see the User’s Manual, available on the CD included in this package, or from www.axis.com/techsup Installation steps 1. Check the package contents against the list below. 2. Hardware overview. See page 4. 3. Install the hardware. S
ملخص المحتوى في الصفحة رقم 4
Page 4 AXIS P3301/-V Installation Guide Hardware overview 16mm cable conduit (not supplied) fitted to AXIS P3301-V Cover plates I/O terminal Control button connector see page 13 Power connector see page 13 connector Power Network Audio out Audio in indicator LED see page 13 Network indicator LED Status Product ID & Serial number (S/N). indicator The serial number may be LED required during the installation. Microphone Dimensions HxWxD = 94 x 144 x 132mm (3.7" x 5.7" x 5.2") Weight AXIS P3
ملخص المحتوى في الصفحة رقم 5
ENGLISH AXIS P3301/-V Installation Guide Page 5 Install the hardware IMPORTANT! - The casing of the AXIS P3301-V is not approved for outdoor use - the product may only be installed in indoor environments. ! Mount the camera The AXIS P3301/-V can be mounted with the cables routed through the wall/ceiling, or from above or below. There are cover plates for the openings on both sides of the dome cover. The AXIS P3301/-V can also be fitted with a metal conduit for protecting the cabling when co
ملخص المحتوى في الصفحة رقم 6
Page 6 AXIS P3301/-V Installation Guide Connect the cables 1. Optionally connect external input/output devices, e.g. alarm devices. See page 13 for informa- tion on the terminal connector pins. 2. Optionally connect an active speaker and/or external microphone. 3. Connect the camera to the network using a shielded network cable. 4. Connect power, using one of the methods listed below: • PoE (Power over Ethernet, Class 2). If available, this is automatically detected when the network cable is c
ملخص المحتوى في الصفحة رقم 7
ENGLISH AXIS P3301/-V Installation Guide Page 7 AXIS IP Utility - single camera/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address . Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS P3301/-V. Automatic discovery 1. Check that the AXIS P3301/-V is connected to the network and that power has been applied. 2. Sta
ملخص المحتوى في الصفحة رقم 8
Page 8 AXIS P3301/-V Installation Guide AXIS Camera Management - multiple cameras/large installations AXIS Camera Management can automatically discover multiple Axis devices, show connection status, manage firmware upgrades and set IP addresses. Automatic discovery 1. Check that the camera is connected to the network and that power has been applied. 2. Start AXIS Camera Management. When the AXIS P3301/-V appears in the window, double-click it to open the camera’s home page. 3. See page 9 for
ملخص المحتوى في الصفحة رقم 9
ENGLISH AXIS P3301/-V Installation Guide Page 9 Set the password To gain access to the product, the password for the default administrator user root must be set. This is done in the ‘Configure Root Password’ dialog, which is displayed when the AXIS P3301/-V is accessed for the first time. To prevent network eavesdropping when setting the root password, this can be done via an encrypted HTTPS connection, which requires an HTTPS certificate (see note below). To set the password via a standard H
ملخص المحتوى في الصفحة رقم 10
Page 10 AXIS P3301/-V Installation Guide Access the video stream The Live View page of the AXIS P3301/-V is displayed, with links to the Setup tools, which allow you to customize the camera. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this. Setup - Provides all the tools for configuring the camera to requirements. Help - Displays online help on all aspects
ملخص المحتوى في الصفحة رقم 11
ENGLISH AXIS P3301/-V Installation Guide Page 11 Adjust the image and focus Open the Live View page in the web interface and make the following adjustments to the camera: 1. Loosen the locking screw and tilt adjust- ment screws. Locking screw 2. Turn the lens to the desired position. 3. Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure the camera’s position. 4. Turn the image balance ring to set the Image horizontal position. balance ring 5. Open the Focus
ملخص المحتوى في الصفحة رقم 12
Page 12 AXIS P3301/-V Installation Guide Other methods of setting the IP address The table below shows the other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled. Use in operating Notes system Windows When enabled on your computer, the camera is automatically UPnP™ (ME or XP) detected and added to “My Network Places.” MAC OSX Applicable to browsers with support for Bonjour. Navigate to the Bonjour (10.4 or later) Bonjour
ملخص المحتوى في الصفحة رقم 13
ENGLISH AXIS P3301/-V Installation Guide Page 13 Unit connectors Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended. Power connector - Mini DC connector. 5.1V DC, max 4.0W. See product label for ± connection. Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal). Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active spea
ملخص المحتوى في الصفحة رقم 14
Page 14 AXIS P3301/-V Installation Guide Connection diagram AXIS P3301/-V 1 o e.g. pushbutton 3.3V 2 max. 50mA o 3 o 4 D o G S LED indicators LED Color Indication Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity. Amber Steady for connection to 10 Mbit/s network. Flashes for network activity. Unlit No network connection. Status Green Steady green for normal operation. Note: The Status LED can be configured to be unlit during normal operation, or to flash
ملخص المحتوى في الصفحة رقم 15
ENGLISH AXIS P3301/-V Installation Guide Page 15 Resetting to the Factory Default Settings This will reset all parameters, including the IP address, to the Factory Default settings: 1. Disconnect power from the camera. 2. Press and hold the Control button and reconnect power. 3. Keep the Control button pressed until the Power indicator flashes amber (this may take up to 15 seconds). 4. Release the Control button. When the Power indicator displays green (which can take up to 1 minute) the proce
ملخص المحتوى في الصفحة رقم 16
ملخص المحتوى في الصفحة رقم 17
FRANÇAIS AXIS P3301/-V Guide d'installation Page 17 AXIS P3301/-V Guide d'installation Ce guide d'installation vous explique comment installer la AXIS P3301 / AXIS P3301-V Caméra réseau à dôme fixe sur votre réseau. Pour d'autres informations sur l'utilisation de ce produit, consultez le manuel de l'utilisateur, disponible sur le CD fourni, ou visitez le site www.axis.com/ techsup. Étapes de l'installation 1. Vérifiez le contenu de la livraison à l'aide de la liste ci-dessous. 2. Présentation
ملخص المحتوى في الصفحة رقم 18
Page 18 AXIS P3301/-V Guide d'installation Présentation du matériel conduit de câbles 16 mm (non fourni) installé AXIS P3301-V Plaques d'obturation Bouton de commande Connecteur pour terminaux E/S Connecteur Reportez-vous à d’alimentation la page 28 Reportez-vous à la page 28 Sortie Entrée audio Témoin DEL Connecteur audio d’alimentation deréseau Reportez-vous Témoin DEL réseau à la page 28 Témoin ID du produit et numéro de série (S/N). DEL Le numéro de série peut d'état être de
ملخص المحتوى في الصفحة رقم 19
FRANÇAIS AXIS P3301/-V Guide d'installation Page 19 Installation du matériel IMPORTANT ! - Le boitier de l'AXIS P3301-V n'est pas approuvé pour une utilisation extérieure - Le produit doit être uniquement installé en intérieur. ! Montage de la caméra La caméra AXIS P3301/-V peut être montée avec les câbles d'alimentation et réseau acheminés dans le mur/plafond, ou depuis le haut ou le bas. Vous disposez de plaques d'obturation pour les ouvertures des deux côtés du capot du dôme. La caméra A
ملخص المحتوى في الصفحة رقم 20
Page 20 AXIS P3301/-V Guide d'installation Branchement des câbles 1. Si vous le souhaitez, connectez des dispositifs externes, par exemple des dispositifs d'alarme. Reportez-vous à la page 28 pour plus d'informations sur les broches du connecteur pour terminaux. 2. Si vous le souhaitez, connectez un haut-parleur actif et/ou un micro externe. 3. Connectez la caméra à votre réseau à l'aide d'un câble de réseau blindé. 4. Branchez l'alimentation à l'aide de l'une des méthodes reprises ci-dessous
