ملخص المحتوى في الصفحة رقم 1
W Wi ide Dynamic Range de Dynamic Range
Dome Camera
CVC624WDR
200 200 N New H Hi igh hway
Amityville, NY 11701
631-957-8700
www.specotech.com
ملخص المحتوى في الصفحة رقم 2
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REF E R S E R V ICI NG TO QUALIFIE D SE SER RV VIIC CE E P PE ERS RSO ON NNE NEL L . ______________ _ The lighting flash with an arrowhead symbol, within an equilateral triangle is Intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitud
ملخص المحتوى في الصفحة رقم 3
CONTENTS Package Contents 4 Precautions 5 Camera Installation 6-7 Features 8 OSD Menu Tree 9 OSD Menu Details 10-12 Troubleshooting 13-14 Specifications 15 Dimensions 16 Warranty 17 3
ملخص المحتوى في الصفحة رقم 4
PACKAGE CONTENTS Please make sure that the following items are included in the package: 1 CVC624WDR Camera 2 Mounting Screws 1 Video Test Connector Please leave this manual with the end-user for future reference. COMPATIBILITY “A” type Box DFM Series Electrical Box is not included in the ppg ackage but Is compatible with the camera 4
ملخص المحتوى في الصفحة رقم 5
PRECAUTIONS • THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL • TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • DO NOT CLEAN THE DOME COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE DOME COVER • THERE ARE NO USER-SERVICEABLE PARTS INSIDE. PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE INITIAL ADJUSTMENTS • • PLEA PLEASE SE USE USE A A UL UL A APPROVED PPROVED REGULA REGULATED TED 12 12 VOLT VOLT D DC C
ملخص المحتوى في الصفحة رقم 6
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500 mA) Power Input :RED Center : (+) DC 12V Power Supply 2. CONNECT VIDEO CABLE -CONNECT CONNECT BNC BNC C CABLE ABLE T TO O T TH HE E BNC BNC J JACK ACK. 6
ملخص المحتوى في الصفحة رقم 7
CAMERA INSTALLATION MECHANICAL (2) JOY STICK (1) Vari-focal Lens (3) Video Test Terminal (1) VARI-FOCAL LENS Adjust between T W (TELE WIDE) to set the angle (focal length). Set the focus by adjusting ∞ N NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES". (2) JOY STICK TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY STICK FOR ONE SECOND AND SET AS DESCRIBED IN THE MANUAL (3) VIDEO TEST TERMINAL 7
ملخص المحتوى في الصفحة رقم 8
FEATURES 1. Superior Wide Dynamic Image Quality It has very Wide Dynamic Range by using the Pixim ORCA Chip Set. Film-like colors are achieved under various Light conditions even in High Dynamic range scenes , Dynamic Range achieves a maximum of 120dB. 2 2. D Digital igital Pixel Pixel Sy System stem Each pixel is processed independently to get clear and usable images. 3. OSD control Every function is controlled by OSD menu - Automatic white balance - Automatic gain control (max 60dB) - Slow shu
ملخص المحتوى في الصفحة رقم 9
OSD MENU TREE SPECO MAIN MENU PRESETS DEFAULT / INDOOR / OUTDOOR / CUSTOM SET UP ID DISPLAY ID : (OFF / ON) CAMERA ID : 8 CHARACTER ID POSITION : (UP-LEFT / UP-CENTER / UP-RIGHT DOWN-LEFT / DOWN-RIGHT) LENS SELECT DC MANUAL WDR AUTO OFF MANUAL : (WDR BIAS Range -20 to 20 / WDR RANGE 0 to 36) WB CONTROL ATW(Range 2K~11K) AWB MANUAL (Range 2K ~11K) LOW LIGHT SLOW SHUTTER : (SHUTTER LIMIT Range OFF~X32 / AGC CONTROL Range 0 to 60) AUTO D/N SPECIAL VIDEO : (NTSC / PAL) FLIP FLIP : : ( (OF OFF F //
ملخص المحتوى في الصفحة رقم 10
OSD MENU DETAILS 1. OSD MENU ENTER / EXIT A. OSD MENU ENTER • Push Center Key for 2 seconds B. OSD MENU EXIT • Press EXIT Menu from Main Menu • If Pressing Set Key for 2 seconds from Main Menu appears. In this case, just press Set Key. C. 'SAVE' and 'QUIT‘ • Left or Right Key - Selecting Menu • Up or Down Key - Returning to Menu 1. Press the SET key to access the main setup mode. 2. Select the desired feature using the UP or Down key. 3 3. C Chang hange e tthe he status status of of the the
ملخص المحتوى في الصفحة رقم 11
OSD MENU DETAILS C. LENS • MANUAL : Use Manual lens Only. D. WDR • WDR (Wide Dynamic Range) : You can adjust the desired WDR BIAS from -20 to 20 and WDR RANGE from 0 to 36 E E. WB WB CONTROL CONTROL • ATW (Auto Tracking White Balance) : The camera automatically control the white balance in any environment. • AWB (Auto White Balance) : The white balance is automatically adjusted in a specific environment. • MANUAL : Users can adjust the colors by adding or reducing the WB level. You can adjust
ملخص المحتوى في الصفحة رقم 12
OSD MENU DETAILS • BACK LIGHT : BACK LIGHT ADJUST or SELECT AREA • RESOLUTION : Select Resolution of CCD or PIXIM • COLOR MODE : COLOR or B/W SELECTION • SHARPNESS : ON (You can adjust the desired Sharpness form - 8 to 8) or OFF H. EXIT MENU • EXIT NO CHANGES : No change • SAVE SAVE NEW NEW A AND ND EXIT EXIT :: Save Save c change hange • RESTORE FACTORY SETTINGS : Factory default • RELEASE VERSION I. PREVIOUS PAGE • PREVIOUS PAGE : Return page Pixim’s patented Digital Pixel System (DPS) techno
ملخص المحتوى في الصفحة رقم 13
TROUBLESHOOTING If If y yo ou u have have ttrouble rouble operating operating y your our camera camera, refer refer tto o tthe he follow followiing ng Problem Solution Nothing appears on ● Check that the power cord and line connection the screen. between the camera and monitor are correct ● Check that yyp ou have prop perly y connected VIDEO cable to the camera VIDEO output jack. The image on the ● Is the lens stained with dirt? Clean your lens with soft clean cloth. screen is dim. ● Set the m
ملخص المحتوى في الصفحة رقم 14
TROUBLESHOOTING Problem Solution The color of the ● Check that you have properly set the picture is not ‘ WHITE BALANCE ’ menu proper. The image on the ● Is the camera facing to direct sunlight or fluorescent screen flickers. lighting? Change the camera position. 14
ملخص المحتوى في الصفحة رقم 15
SPECIFICATIONS Siggy nal System NTSC 1/3 inch Pixim ORCA CMOS (Dramatic Pick-up Device Dynamic range sensor) Total of pixels 742(H) x 552(V) Horizontal Resolution 540 Horizontal TV Lines (color) Vertical Resolution 460 VTVL Scanning System 525 Iines interlaced / 625 Iines interlaced Synchronization Internal Video Output 1.0Vp-p/75 ohm Composite Sensitivity 0.08Lux (DSS on) with F1.2 Lens S/N Ratio 53dB or more Dynamic range 120dB(max), 102dB(typical) Shutter Speed 1/60 - 1/100,000 / 1/50
ملخص المحتوى في الصفحة رقم 16
DIMENSIONS * SIDE VIEW * TOP VIEW 16
ملخص المحتوى في الصفحة رقم 17
WARRANTY 17
ملخص المحتوى في الصفحة رقم 18
MEMO
ملخص المحتوى في الصفحة رقم 19
MEMO
ملخص المحتوى في الصفحة رقم 20
200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com Rev. 100317 Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation.
