ملخص المحتوى في الصفحة رقم 1
INSTRUCTION
MANUAL
Intense-IR Camera
CVC5845DNV / CVC5845DNVW
CVC5945DNV / CVC5945DNVW
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 6/20/2012
ملخص المحتوى في الصفحة رقم 2
Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation ..................................... 6-8 ◑ Specifications .............................................. 9, 10 ◑ Camera Dimension ..................................... 11 ◑ OSD Menu Details .........
ملخص المحتوى في الصفحة رقم 3
Precautions Do not install the camera in Do not install the camera under Do not touch the front lens of the extreme temperature conditions. unstable lighting conditions. camera. Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when
ملخص المحتوى في الصفحة رقم 4
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SER VICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ملخص المحتوى في الصفحة رقم 5
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do
ملخص المحتوى في الصفحة رقم 6
Package Contents Please make sure that the following items are included in the Package: 1) CVC5845DNV, CVC5845DNVW, CVC5945DNV, CVC5945DNVW • 1 Video Test Connector, Power Jack • 2 Wrenches • Set Screw - 3 Tapping Screws 4x25 - 2 Hexagon Socket Screws M6x20 - 5 -
ملخص المحتوى في الصفحة رقم 7
CAMERA INSTALLATION - 6 -
ملخص المحتوى في الصفحة رقم 8
CAMERA INSTALLATION Compatibility 1) CVC5845DNV, CVC5845DNVW, CVC5945DNV, CVC5945DNVW INTWM INTPM JB03TG - 7 -
ملخص المحتوى في الصفحة رقم 9
CAMERA INSTALLATION 1. CVC5845DNV, CVC5845DNVW, CVC5945DNV, CVC5945DNVW BALL DOME BASE TAPPING SCREW 4X25, 3EA BALL DOME ASSEMBLY HEXAGON SOCKET SCREW M6X20, 2EA BALL DOME BODY - 8 -
ملخص المحتوى في الصفحة رقم 10
Intense - IR Vandal Dome Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in 42 pcs ■ CVC5845DNV ■ CVC5845DNVW 600TV Lines DC Auto Iris Varifocal Lens (2.8mm-12mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs x 42pcs SPECIFICATIONS MODEL CVC5845DNV / CVC5845DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace Scanning System Internal / Line Lock
ملخص المحتوى في الصفحة رقم 11
Intense - IR Vandal Dome Camera DC Auto Iris Varifocal Lens(5mm-50mm) / IR LED Built-in 42 pcs ■ CVC5945DNV ■ CVC5945DNVW 600TV Lines DC Auto Iris Varifocal Lens (5mm-50mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs x 42pcs SPECIFICATIONS MODEL CVC5945DNV / CVC5945DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace Scanning System Internal / Line Lock(Opt
ملخص المحتوى في الصفحة رقم 12
CAMERA DIMENSION 1) CVC5845DNV, CVC5845DNVW, CVC5945DNV, CVC5945DNVW 5.47” dia - 11 - 4.36” 3.34” 3.70”
ملخص المحتوى في الصفحة رقم 13
OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) - 12 -
ملخص المحتوى في الصفحة رقم 14
How to Set Up the camera menu ● Setup Menu - 13 -
ملخص المحتوى في الصفحة رقم 15
- 14 -
ملخص المحتوى في الصفحة رقم 16
- 15 -
ملخص المحتوى في الصفحة رقم 17
Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT
ملخص المحتوى في الصفحة رقم 18
3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol is display "- - - -" Lens 1. Move the arrow indicator to LENS using the
ملخص المحتوى في الصفحة رقم 19
NOTE * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. Lens BRIGHTNESS 100 RETURN 3. Press the RETURN to return to the SETUP menu. Exposure This function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJU
ملخص المحتوى في الصفحة رقم 20
EXPOSURE SHUTTER AUTO AGC MIDDLE SENS-UP AUTO BLC OFF D-WDR OFF RETURN RET NOTE *Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed from 1/60, FLK, 1/250~1/100,000. →FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric light. If select FLK mode, sense-up does not operate. * AGC(AUTO GAIN CONTROL): A higher gain increases brightness but also increases any noise. OFF : Deactivates the AGC function LOW : Sets automatic gain c
