ملخص المحتوى في الصفحة رقم 1
Mid-Size Vandal Dome Camera
Manual
(3.6mm model shown)
Model No. Resolution Lens Size # of IR LEDs
NTSC
EV-2166-N3WQ 420 TV lines 3.6mm 18
EV-2166-NV WQ 420 TV lines 4~9mm 21
EV-2766-N3WQ 540 TV lines 3.6mm 18
EV-2766-NV WQ 540 TV lines 4~9mm 21
PAL
EV-2166-P3WQ 420 TV lines 3.6mm 18
EV-2166-PV WQ 420 TV lines 4~9mm 21
EV-2766-P3WQ 540 TV lines 3.6mm 18
EV-2766-NV WQ 540 TV lines 4~9mm 21
Note: Products with model numbers that end with “Q” or that have a r
ملخص المحتوى في الصفحة رقم 2
SECO-LARM Mid-Size Vandal Dome Cameras Specifications: NTSC 2166-N3WQ 2166-NV WQ 2766-N3WQ 2766-NV WQ PAL 2166-P3WQ 2166-PV WQ 2766-P3WQ 2766-PV WQ Type Mid Size Vandal Dome 1 CCD /3” Sony Super HAD II Resolution 420 TV lines 540 TV lines Lens 3.6mm 4~9mm 3.6mm 4~9mm # of IR LEDs 18 (850nm) 21 (850nm) 18 (850nm) 21 (850nm) IR range 65ft (20m) 80ft (25m) 65ft (20m) 80ft (25m) Pickup NTSC 510x492 pixels 768x494 pixels elements PAL 500x528 pixels
ملخص المحتوى في الصفحة رقم 3
SECO-LARM Mid-Size Vandal Dome Cameras Overview: Models ending in NVWQ or PVWQ only. Focus Zoom Camera Set screw Dome cover Female BNC connector Wiring notch DC plug with terminal block DC jack Important: Do not cut the DC jack or the female BNC connector Mounting base as this will void the Mounting screw warranty. Before Starting: 1. Please read this manual carefully and keep it for future 5. Do not drop the camera or subject it to strong reference.
ملخص المحتوى في الصفحة رقم 4
SECO-LARM Mid-Size Vandal Dome Cameras Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. Clean the lens using a soft, clean cloth. The screen image is dim Check that the light source is adequate. Adjust the monitor’s contrast knob. The screen image has poor contrast. Change t
