ملخص المحتوى في الصفحة رقم 1
NETWORK CAMERA
User Manual
SNB-5001/SNB-7001
ملخص المحتوى في الصفحة رقم 2
Network Camera User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or chang
ملخص المحتوى في الصفحة رقم 3
● OVERVIEW overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the saf
ملخص المحتوى في الصفحة رقم 4
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC SHOCK. CAUTION DO NOT REMOVE COVER (OR BACK). NO
ملخص المحتوى في الصفحة رقم 5
● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code with fittings of an approv
ملخص المحتوى في الصفحة رقم 6
overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near conductive material. Do not attempt to service this apparatus yourself. Do not place a glass of water on the product. Do not install near any magnetic sources. Do not block any ventilation openings. Do not plac
ملخص المحتوى في الصفحة رقم 7
● OVERVIEW CONTENTS 3 Important Safety Instructions OVERVIEW 9 Product Features 9 Recomended PC Specifications 10 What’s Included 3 11 At a Glance 14 Mounting the Lens INSTALLATION & 16 Connecting with other Device CONNECTION 14 19 Connecting the Camera Directly NETWORK CONNECTION to Local Area Networking AND SETUP 20 Connecting the Camera Directly to a DHCP Based DSL/Cable Modem 19 21 Connecting the Camera Directly to a PPPoE Modem 22 Connecting the Camera to a Broadband Router with the
ملخص المحتوى في الصفحة رقم 8
overview 32 Connecting to the Camera WEB VIEWER 33 Login 34 Installing STW WebViewer Plugin 35 Using the Live Screen 32 37 Setup SETUP SCREEN 37 Video Setup 47 Network Setup 55 Event Setup 37 62 System Setup 68 Specification APPENDIX 73 Product Overview 74 Troubleshooting 75 Open Source Announcement 68 76 License 79 GPL/LGPL Software License 8_ overview
ملخص المحتوى في الصفحة رقم 9
● OVERVIEW PRODUCT FEATURES • Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • Web Browser-based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm If an event occurs, the event-related video will be transferred to the email or FTP server specified by the user. • Video Motion Detection Detects a motion from the video before triggering an event. • Screen cha
ملخص المحتوى في الصفحة رقم 10
overview WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Camera 1 Instruction book, Installer S/W CD, 2 CMS S/W DVD Quick Guide (Optional) 1 Used to test the camera connection to a Cable for the testing monitor 1 portable display device Alarm Cable 1 Used to connect to Alarm input C Mount Adapter 1 Used to install the C Mount camera lens Lens Options (not included) CS/C Lens Optional lens to be insert
ملخص المحتوى في الصفحة رقم 11
● OVERVIEW AT A GLANCE Front Side b c Item Description Used to fix the camera on a mounting bracket. The screw size : use this screw to fix the mounting bracket. Mounting Bracket 1/4" - 20UNC (20THREAD/1") Screw Hole L : 4.5mm±0.2mm (ISO Standard), or 0.197" (ASA Standard) Auto Iris Lens Used to supply power and output signal to control the iris of the lens. b Connector English _11
ملخص المحتوى في الصفحة رقم 12
overview Item Description FBL Lever Adjust the FBL (Flange-Back Length) value according to the lens. c Auto Iris Lens Installed on the lens adaptor. (Optional) Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied M ethanol. Mounting Bracket is not included. For more information to use mounting bracket, refer to the product’s documentation. 12_ overview
ملخص المحتوى في الصفحة رقم 13
● OVERVIEW Rear Side b c NETWORK ALARM IN ACT LINK DC12V RESET VIDEO Item Description Network Port Used to connect a PoE or LAN cable. Lightning protective Used to discharge the lightning current safely outside in order to protect the b grounding port camera. Power Port Used to plug the power cable. c Alarm Input Port Used to connect the alarm input signal. Video Out Port Analog video output port. (for installation) Resets the camera settings to the default. Press and hold
ملخص المحتوى في الصفحة رقم 14
installation & connection MOUNTING THE LENS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. M Mounting the lens onto the C/CS mount camera 1. Fit the lens into the mounting screw hole and turn it clockwise. Tighten the screw. Then, it rotates in SLIP mode. C/CS Lens 2. Turn it clockwise until it contacts on the stopper and stops. 3. As you can turn it counter clockwise from the stop point to rotate it in Slip mode, adjust the angle to
ملخص المحتوى في الصفحة رقم 15
● INSTALLATION & CONNECTION 5. Use the focus lever and zoom lever to fit the zoom factor and focus. Then, fix the lens with the camera. Using a lens with hood The round hood is mounted on the camera lens, which is designed to prevent flare/ghost/ light spreading. If it is installed improperly, it may cause shading on the screen. Install the hood so that the wider side is placed vertically; and the narrower side is put horizontally. English _15
ملخص المحتوى في الصفحة رقم 16
installation & connection CONNECTING WITH OTHER DEVICE Monitor NETWORK (for installation) ALARM IN ACT LINK DC12V VIDEO Power Ethernet The BNC Out terminal of the product is provided for easier installation, and is not recommended J for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product. Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to
ملخص المحتوى في الصفحة رقم 17
● INSTALLATION & CONNECTION Be careful not to reverse the polarity when you connect the power cable. Please connect the power adapter when the installation is completed. - As shown in the table below, you may encounter a voltage-sag depending on the wire length. If - you use an excessively long wire for camera connection, the camera may not work properly. Electrical Resistance of Copper Wire at [20°C (68°F)] 2 2 2 2 Copper Wire Gauge (AWG) #24(0.22mm ) #22(0.33mm ) #20(0.52mm ) #18(0.83mm
ملخص المحتوى في الصفحة رقم 18
) N I M ) D R N A L G ( A ( K N C W A O L installation & connection To connect to the alarm input port Connect the alarm cable to the ALARM IN port in the rear panel. NETWORK ALARM IN ACT LINK DC12V RESET VIDEO SENSOR Port Description Port Description ALARM IN Alarm Input Sensor Port GND GND port for the sensor To connect the external sensor Connect one strand of each signal line (2-strand) of the sensors to the [ALARM IN] port, and connect the other strand to the [GND] port. 1
ملخص المحتوى في الصفحة رقم 19
● NETWORK CONNECTION AND SETUP network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the address bar of the browser. Camera INTERNET Firewall External Remote PC Camera DDNS Server Local PC (Data Center, KOREA) A remote PC in an ext
ملخص المحتوى في الصفحة رقم 20
network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect to the camera. 4. Move to [Setup] page. 5. Move to [Network] –
