ملخص المحتوى في الصفحة رقم 1
PowerLook 2100XL
Operation Manual
Thank you for purchasing the PowerLook 2100XL color scanner. With PowerLook 2100XL color scanner,
you can easily scan documents and photographs into your computer and maintain them as electronic copies.
Main Features:
High Resolution and Density Range: With a resolution of up to 9600 dpi and high density range, it
produces better gamma transformation, and more accurate detection of highlight and shadow details,
thereby allowing
ملخص المحتوى في الصفحة رقم 2
Contents Quick Start Guide…………………………………………………………………………………………...3 1. Unpack your Scanner……………………………………………………………………………….3 2. Connect the Interface Card………………………………………………………………………….3 3. Connect the SCSI Cable…………………………………………………………………………….3 4. Connect the Power………………………………………………………………………………….3 5. Power Up……………………………………………………………………………………………4 6. Software Installation………………………………………………………………………………..4 About this manual………………………………………………………………………………………..5 Chapter 1: Getting Started…………………
ملخص المحتوى في الصفحة رقم 3
Quick Start Guide This section serves as a quick reference to the connection and installation procedures for the PowerLook 2100XL scanner. 1. Unpack your Scanner Unpack your scanner. Make sure that all the scanner system hardware, software, cabling, and documentation items indicated on the packing list are present. 2. Connect the Interface Card a) For PC users, turn off your computer and remove the computer’s housing cover. b) For New Power Mac G3 and G4 users, turn off your
ملخص المحتوى في الصفحة رقم 4
5. Power Up a) Turn the scanner power switch on. When the Ready indicator is on, your scanner is ready to use. b) Turn on your computer 6. Software Installation We recommend that you install your image editing software first and then MagicScan. a) Insert UMAX MagicScan CD into your CD-ROM drive. b) Follow the on-screen instructions to completely install MagicScan. Notes: If installation program does not show up automatically, please follow the procedure to install:
ملخص المحتوى في الصفحة رقم 5
About this manual This manual is divided into chapters and appendices. The chapters give instructions on all aspects of installation, troubleshooting, and basic scanner maintenance. The appendices contain relevant technical information for your reference. Chapter 1 Gives instructions on scanner preparation and tips on handling and routine scanner maintenance. Chapter 2 Gives instructions on scanner connection to a Macintosh computer and the corresponding software installation.
ملخص المحتوى في الصفحة رقم 6
Chapter 1: Getting Started Your PowerLook 2100XL scanner is extremely user-friendly. Hardware and software installation can be completed in a few steps. In minutes you can start operating your scanner to see for yourself the kind of quality scanned images it can produce. This chapter tells you how to prepare your scanner for connection and installation. It also gives some handling precautions and general care measures to ensure that your scanner will stay in top condition at all ti
ملخص المحتوى في الصفحة رقم 7
25/50-Pin SCSI Connector – Where you plug in the 25/50-Pin SCSI cable. UTA Connector – A connector used to connect the optional UMAX Transparency Adapter. Power Cord Connector – Where you plug in the scanner power cord. Front View Rear View 7
ملخص المحتوى في الصفحة رقم 8
Prepare the Scanner Prepare your scanner for installation through the following simple steps: Check and reset (if necessary) the scanner’s SCSI ID Run the automatic scanner self-test Test the Scanner The scanner automatically performs a simple self-test each time it is turned on. This self-test checks the status of certain scanner devices. Start the scanner self-test by following the steps below: 1. Connect the power cord to a wall outlet. 2. Connect the other end of
ملخص المحتوى في الصفحة رقم 9
To reset the SCSI ID, do the following: 1. Make sure the scanner power is off. 2. Use a screwdriver to rotate the SCSI ID switch on the SCSI ID switch until an unused number appears in the switch’s notch. Note: Do not use SCSI ID setting from 7 through 9 on your scanner. They are for factory use only. Care and Maintenance Tips Regularly clean the object glass of the scanner and the transparency adapter to prevent dirt or smudge build-up that may reduce the quality of your sca
ملخص المحتوى في الصفحة رقم 10
Chapter 2: Macintosh Installation This chapter describes how you can use your scanner with your Macintosh computer. Interface Card Installation (For Mac with built in SCSI port users, please skip to next section) Before you can use your scanner with your computer, you need to install the interface card into your Computer. To install the card into one of the computer’s expansion slots, observe the following procedures: Note: The interface card is sensitive to static electricity.
ملخص المحتوى في الصفحة رقم 11
3. Connect the power cord to the scanner. And connect the other end of the power cord to a grounded power socket. 4. Turn on the scanner power. 5. Turn on the computer power. Installing the Software Install the software in the following order: 1. Image Application Software, e.g. Adobe Photoshop. 2. Insert UMAX MagicScan CD into your CD-ROM drive. 3. Follow the on-screen instructions to completely install MagicScan. Note: If installation does not show up automat
ملخص المحتوى في الصفحة رقم 12
How to Scan with Scan Frames Scan Frames are for use with transparencies and negatives. Scan Frames are thin, hinged rectangular-shaped plastic frames (see following diagrams) which can hold a source document of a slightly smaller size. The Scan Frames come in a number of sizes. Orientation holes are located on the short sides of the frames. When one or more of these frames are placed on the scanner’s object glass and the “Scan” button is clicked, the scanner will automatically detect
ملخص المحتوى في الصفحة رقم 13
Multiple Scanning Using the A3/ 35mm Slide Tray 1. Place the transparencies into the slide holders on the slide tray. 2. Lift up the A3 Scanner’s transparency adapter and place the Slide Tray on the scanner’s object glass. 3. Line the orientation holes up in such a way that the entire tray fits on the object glass and the slide tray borders line up with the rulers on the scanner’s object glass. Note: Although misalignment will not prevent the scanner from scanning, portions of
ملخص المحتوى في الصفحة رقم 14
Chapter 3: PC Installation This chapter describes how you can connect and use the PowerLook 2100XL scanner with your IBM PC or compatible computer. Interface Card Installation Before you can use your scanner with your computer, you need to install the interface card into your PC. To install the card into one of the computer’s expansion slots, observe the following procedures: Note: The interface card is sensitive to static electricity. Handle the card by its mounting bracket,
ملخص المحتوى في الصفحة رقم 15
3. Connect the power cord to the scanner. 4. Turn on the scanner power. 5. Turn on the computer power. Hardware installation is now completed. Get ready to run the UMAX Setup program to install the supporting UMAX software supplied with your system. Installing the Software Install the software in two easy steps, in the following order: 1. Image Application Software, e.g. binuscan PhotoPerfect, Adobe PhotoShop. 2. Insert UMAX MagicScan CD into your CD-ROM drive. 3.
ملخص المحتوى في الصفحة رقم 16
How to Scan with Scan Frames Scan Frames are for use with transparencies and negatives. Scan Frames are thin, hinged, rectangular-shaped plastic frames (see following diagrams) which can hold a source document of a slightly smaller size. The Scan Frames come in a number of sizes, including 35mm, 120mm, 6 x 6 cm and, 4 x 5 inch. Orientation holes are located on the short sides of the frames. When one or more of these frames are placed on the scanner’s object glass and the “Scan” button
ملخص المحتوى في الصفحة رقم 17
Multiple Scanning Using the A3/ 35mm Slide Tray 1. Place the transparencies into the slide holders on the slide tray. 2. Lift up the A3 Scanner’s transparency adapter and place the Slide Tray on the scanner’s object glass. 3. Line the orientation holes up in such a way that the entire tray its on to the object glass and the slide tray borders lines up with the rulers on the scanner’s object glass. Note: Although misalignment will not prevent the scanner from scanning, portions
ملخص المحتوى في الصفحة رقم 18
Chapter 4: Troubleshooting Tips The PowerLook 2100XL scanner was designed to provide a hassle-free installation and operation. However, should you encounter problems with your scanner, correct them by way of the troubleshooting tips given in this chapter. For persistent problems with your computer, consult your dealer or approved service personnel. General Approach In most cases, a problem does not call for the service of a qualified technician. The solution may be very simple,
ملخص المحتوى في الصفحة رقم 19
• Description of what you were doing at the time the malfunction or failure occurred. • Description of what you did to attempt to solve the problem. • Other observations that may aid the technician in identifying the problem and the solution. LED Indicators Listed below are some of the more common specific problems you may have with your scanner. Corrective actions are also given. Problem 1: Power Indicator fails to come on Possible Cause / Solution: • Make sure the pow
ملخص المحتوى في الصفحة رقم 20
Appendix A: Installing A SCSI Card If you are using a SCSI interface card with your computer and scanner, refer to the installation instructions provided with the interface card. After installing the card, do the following steps before connecting your scanner to your computer: • Confirm or reset the SCSI ID of the scanner. • Check the terminators in the SCSI Chain. • Make the SCSI cable connections. Check the SCSI ID The illustration below shows the location of the SCSI ID
