ملخص المحتوى في الصفحة رقم 1
OPERATOR’S MANUAL
18 VOLT JIG SAW
ORBITAL / VARIABLE SPEED
R843
Your cordless jig saw has been engineered and manufactured to our high standards for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
1
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS n Introduction .....................................................................................................................................................................2 n General Safety Rules ................................................................................................................................................... 3-4 n Specific Safety Rules......................................................................................................
ملخص المحتوى في الصفحة رقم 3
GENERAL SAFETY RULES n Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better WARNING! control of the tool in unexpected situations. READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may n Use safety equipment. Always wear eye protection. result in electric shock, fire and/or serious personal Dust mask, non-skid safety shoes, hard hat, or hearing injury. protection must be used for appropriate condition
ملخص المحتوى في الصفحة رقم 4
GENERAL SAFETY RULES n When servicing a tool, use only identical replacement SERVICE parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified of this manual. Use of unauthorized parts or failure to repair personnel. Service or maintenance performed by follow Maintenance Instructions may create a risk of unqualified personnel may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES n Never use a battery that has been dropped or n
ملخص المحتوى في الصفحة رقم 5
SAFETY RULES FOR CHARGER tain chemicals that can damage, weaken, or destroy WARNING! plastic. READ AND UNDERSTAND ALL INSTRUCTIONS. n An extension cord should not be used unless Failure to follow all instructions listed below, may absolutely necessary. Use of improper extension result in electric shock, fire and/or serious personal cord could result in a risk of fire and electric shock. If injury. extension cord must be used, make sure: a. That pins on plug of extension cord are the
ملخص المحتوى في الصفحة رقم 6
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n Rotational speed, at no load No Load Speed o Class II Construction Doub
ملخص المحتوى في الصفحة رقم 7
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may CAUTION: result in minor or moderate in
ملخص المحتوى في الصفحة رقم 8
FEATURES PRODUCT SPECIFICATIONS Motor......................................................................................................................................................................18 Volt DC Switch..............................................................................................................................................................Variable Speed No Load Speed .............................................................................................
ملخص المحتوى في الصفحة رقم 9
FEATURES KNOW YOUR JIG SAW RECESSED BLADE-SUPPORT ROLLER See Figure 1. Recessed blade-support roller ensures accurate cutting. Five-position adjustable orbital saw-blade movement to Before attempting to use this product, familiarize yourself ensure high cutting performance. Hard-wearing die-cast with all operating features and safety rules. aluminum casing with good heat dissipation properties to SWITCH TRIGGER protect against overheating. The jig saw has a variable speed switch trigger tha
ملخص المحتوى في الصفحة رقم 10
ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. n Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-866-539-1710 for assistance. PACKING LIST Jig Saw Batt
ملخص المحتوى في الصفحة رقم 11
OPERATION WARNING: Do not allow familiarity with your tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. Fig. 4 WARNING: Do not use any attachments or accessories n Attach the battery pack to the charger by aligning the not recomm
ملخص المحتوى في الصفحة رقم 12
OPERATION LED FUNCTION OF CHARGER See Figure 5. LED BATTERY RED GREEN ACTION INDICATOR PACK LED LED Power Without battery pack ON OFF Ready to charge battery pack Evaluate Hot battery pack Flashing OFF When battery pack reaches cooled temperature, charger begins fast charge mode Evaluate Cold battery pack Flashing OFF When battery pack reaches warmed temperature, charger begins fast charge mode Evaluate Deeply discharged Flashing OFF Charger pre-charges battery until normal voltage is reach
ملخص المحتوى في الصفحة رقم 13
OPERATION TO INSTALL BATTERY PACK See Figure 6. n Place battery pack in the saw. Align raised rib on battery pack with the groove inside the saw. n Make sure the latches on each side of your battery pack snap in place and battery pack is secured in the saw before beginning operation. BATTERY PACK CAUTION: When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the saw and latches into place properly. Improper installation of the battery pack can
ملخص المحتوى في الصفحة رقم 14
OPERATION WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side. STARTING / STOPPING THE SAW To turn the saw ON, depress the lock-off button and pull the switch trigger. Release the switch trigger to turn the saw OFF. GENERAL CUTTING See Figure 8. Rest the front of the saw base on the workpiece and align cutting edge of the blade with the line on your workpiece. Start the saw and move it forward on the w
ملخص المحتوى في الصفحة رقم 15
OPERATION ANGLE CUTTING (BEVEL CUTTING) BASE PIVOT See Figures 10 - 11. SCREW Bevel cutting angles may be adjusted from 0° to 45° right or left. Angles for cuts from 0° to 45° in 15° increments are marked on a scale on both the left and right side of the base. Notches on the rear of the base provide positive stops at each of the above mentioned 15° increments. A protractor is recommended when accurate cuts are required. n Using the hex key provided, loosen the base pivot screw until the b
ملخص المحتوى في الصفحة رقم 16
OPERATION PLUNGE CUTTING See Figure 12. WARNING: To avoid loss of control, broken blades, or damage to the material being cut, always use extreme caution when making plunge cuts. We do not recommend plunge cutting on materials other than wood. n Mark the line of cut clearly on the workpiece. n Set the cutting angle at 0°. n Tilt the saw forward so that it rests on the front edge of the base and blade will not come in contact with the workpiece when the saw is turned on. n Make sure the bl
ملخص المحتوى في الصفحة رقم 17
MAINTENANCE WARNING: WARNING: When servicing use only identical RIDGID Do not at any time let brake fluids, gasoline, replacement parts. Use of any other parts may petroleum-based products, penetrating oils, etc., create a hazard or cause product damage. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. WARNING: Only the parts shown on the parts list are intended to be Always wear safety goggles or safety glass
ملخص المحتوى في الصفحة رقم 18
NOTES 18
ملخص المحتوى في الصفحة رقم 19
WARRANTY ® RIDGID HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY Proof of purchase must be presented when requesting war- WHAT IS NOT COVERED ranty service. This warranty applies only to the original purchaser at retail ® and may not be transferred. This warranty only covers de- Limited to RIDGID hand held and stationary power tools fects arising under normal usage and does not cover any purchased 2/1/04 and after. This product is manufactured malfunction, failure or d
ملخص المحتوى في الصفحة رقم 20
OPERATOR’S MANUAL 18 VOLT JIG SAW ORBITAL / VARIABLE SPEED R843 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space pro
