Grizzly T10131 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MODEL T10131
BANDSAW EXTENSION
TABLE
INSTRUCTIONS
t he Model t 10131 Bandsaw extension t able
Assembly
provides additional support for longer workpieces
1. remove the protective waxy oil coating from
and installs onto the g rizzly bandsaw Models
the top of the extension table with a solvent
g 0531B, g 0566B, and g 0636XB.
cleaner or degreaser, such as shown in
Accessories on page 2. Avoid chlorine-
Recommended Tools based solvents, such as acetone or brake
parts cleaner that may damage p

ملخص المحتوى في الصفحة رقم 2

3. Use a straightedge as a gauge and adjust the 5. Align the mounting holes on the support plate extension wing up/down until it is flush with and the bottom of the extension table, then the main table above each cap screw, then fasten with four M8-1.25 x 12 hex bolts and completely tighten the cap screws. flat washers, as shown in figure 5. 4. place the straightedge across the extension wing and main table to make sure that the Support combined table surface is flat. plate — if the outsid

ملخص المحتوى في الصفحة رقم 3

g9644—12" precision Straightedge h2675—16" precision Straightedge is your straightedge really straight? these grade 00 heavy-duty stainless steel straightedges are manufactured to din874 standards for profes- sional results in setup and inspection work. T10131 parts Breakdown and List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PT10131001 LOWER SUPPORT LEG 9 PLN05M LOCK NUT M10-1.5 2 PT10131002 UPPER SUPPORT LEG 10 PB28M HEX BOLT M8-1.25 X 60 3 PT10131003 FOOT 11 PW01M

ملخص المحتوى في الصفحة رقم 4