ملخص المحتوى في الصفحة رقم 1
HD Digital Recorder
HD-PVR
The default password is 0000.
Standardlösenordet är 0000.
User’s Manual
/Användarmanual
HDPVR-1000C
ملخص المحتوى في الصفحة رقم 2
Notice Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice. Copyright (Copyright © 2008 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of copyrig
ملخص المحتوى في الصفحة رقم 3
Notice Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. • Warning Indicates a hazardous situation which could result in serious injury. • Caution Indicates a situation which could damage the equipment or other apparatus. • Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation. Meaning of
ملخص المحتوى في الصفحة رقم 4
Safety Warning This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 90-250V a.c., 50/60Hz • Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. • Disconnect the product from the mains before you start any maintenance or inst
ملخص المحتوى في الصفحة رقم 5
Safety Warning 10. LIGHTNING, STORM or NOT IN USE • Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. 11. EXTRANEOUS OBJECTS • Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. 12. REPLACEMENT of PARTS • When replacement of parts is required, be sure the
ملخص المحتوى في الصفحة رقم 6
Contents 1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 7
Contents 7. Preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB38 7.1 Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB38 7.2 Language Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 8
1. Before Using the Product This chapter provides detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. User’s Manual Batteries User’s Manual Remote Control SCART Cable Loop-through Cable HDMI Cable Note: • Faults may occur if the remote control is left without battery for a long time. Always keep the battery inserted in the remote control. • Package contents may vary according to area. Caution: • The company
ملخص المحتوى في الصفحة رقم 9
1. Before Using the Product 1.2 Front Panel HDPVR-1000C CH 1. STANDBY BUTTON Switches between operation and standby modes. 2. RECORD BUTTON Records programme. 3. MENU BUTTON Displays the menu. 4. OK/LIST BUTTON Confi rms the selected operation or displays the channel list in normal viewing mode. 5. CH-/CH+ BUTTON Moves the TV/radio channel up or down. 6. VOL-/VOL+ BUTTON Adjusts the audio volume. 7. USB Host Connect to the USB memory or external HDD. 8. SMARTCARD SLOT A slot for a Smart
ملخص المحتوى في الصفحة رقم 10
1. Before Using the Product 1.3 Conditional Access Although some TV and radio services are free to air, others are available on a subscription basis and can only be enjoyed via a Conditional Access component. The Conditional Access component is a removable Smartcard. 1. Inserting the Smartcard The Smartcard looks similar to a credit card and is inserted into the slot behind the ri
ملخص المحتوى في الصفحة رقم 11
1. Before Using the Product 1.4 Rear Panel 13 4 7 1 2 3 5 6 8 9 10 11 12 1. CABLE IN 8. AUDIO Connects an antenna cable. Connects to the TV or VCR using an RCA cable. 2. CABLE OUT (TV/VCR or LOOP OUT) Connects to the RF IN of the TV or VCR 9. COMPONENT(YPbPr) using an RF cable. Connects to the TV or VCR using a component cable. 3. ETHERNET Ethernet port (for future use). 10. HDMI Connects to the TV using an HDMI cable. 4. TV SCART Connects to the TV using a TV SCART cable. 11. USB Host C
ملخص المحتوى في الصفحة رقم 12
1. Before Using the Product 1.5 Remote Control Note: • The remote control of the product is subject to change without notice. • This remote control can also control your TV, DVD and audio. To set the remote control for your TV, DVD and audio, please refer to 14.7 Remote Control Code List. 1 5 2 a b c 3 6 4 d e f c. FAST FORWARD 1. Universal LED Fasts forward at high speed. Each time you press Displays the operation mode of each device. this button the fast forward speed is increased. 2. NUM
ملخص المحتوى في الصفحة رقم 13
1. Before Using the Product g j h i 7 8 13 14 9 15 10 16 11 12 17 7. COLOUR BUTTONS 11. VOL+/VOL- Adjusts the audio volume. g. RED Displays the channel list in normal viewing mode. 12. i (INFORMATION) h. GREEN Displays the channel and programme Displays the favourite channel list in normal information. viewing mode. 13. GUIDE i. YELLOW Displays the programme guide. Displays the HD channel list in normal viewing 14. OK/LIST mode. Selects a menu or confi rms the selected j. BLUE operation
ملخص المحتوى في الصفحة رقم 14
1. Before Using the Product 20 32 19 18 k l 31 21 22 30 23 29 24 25 26 27 28 18. NEXT 27. TELETEXT Goes to the next chapter. Switches between the teletext and TV modes. 19. PREVIOUS 28. WIDE Goes to the previous chapter. Sets the display format. 20. SLOW 29. V-FORMAT Plays the programme in slow motion. Changes the resolution of video. 21. SUBTITLE 30. TV/RADIO Displays the subtitle language list. Switches between TV and radio modes. 22. AUDIO 31. BOOKMARK Displays the audio list. k. ADD BO
ملخص المحتوى في الصفحة رقم 15
1. Before Using the Product 1.6 Remote Control Batteries 1. Press down the top of the battery cover and slide the cover off . 2. Insert the new batteries. Make sure the plus (+) ends meet the plus markings on the battery case. 3. Slide the cover back into place. GB14 User’s Manual
ملخص المحتوى في الصفحة رقم 16
2. Setup This chapter describes how to connect your product to the TV with the particular equipments for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the equipment you have. Note: • If you encounter any problems setting up your product, please contact your local product distributor. • The rear image of the TV and VCR may diff er depending on the manufacturer and model. 2.1
ملخص المحتوى في الصفحة رقم 17
2. Setup 2.2 Using DVI Converter The DVI connection using an HDMI to DVI converter is recommended for Digital TV. In case the TV has a DVI input connector, connect the product to the TV with an HDMI cable using an HDMI to DVI converter as follows. 1. When equipped with an A/V receiver 1. Connect your CATV line to the CABLE IN. 2. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI convert
ملخص المحتوى في الصفحة رقم 18
2. Setup 2. When there is no A/V receiver available In case you are not equipped with an A/V receiver, connect the product and the TV using an audio cable as follows. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using an RCA cable. 3. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI converter. 4. Connect the DVI converter to the TV. Note: You can also con
ملخص المحتوى في الصفحة رقم 19
2. Setup 2.3 Using Component Cable The component connection is recommended for Digital TV. Connect the product and the TV using a component cable as follows. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using a component cable. 3. You can either: • Connect the product and the TV using an RCA cable (Audio L/R). • Connect the product and the Dolby Digital decoder using an S/PDIF cable. RF Cable Cable Outlet RCA Cable Component Cable S/PDIF Cable L AUDIO R S/PDIF
ملخص المحتوى في الصفحة رقم 20
2. Setup 2.4 Using SCART Cable A SCART cable connection is recommended for analogue TV or VCR. Connect the product and the TV using a SCART cable as follows. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using a SCART cable. 3. Connect the product and the VCR using a SCART cable. Note: Connecting your TV directly to the audio/video output of the product will assure a more vivid picture and enhance your viewing enjoyment. RF Cable Cable Outlet SCART Cable SCART
