ملخص المحتوى في الصفحة رقم 1
OPERATOR'S MANUAL
R1801M1 ROUTER
With R181FB1 Fixed Base
Double Insulated
Your new router has been engineered and manufactured to our Ryobi’s high standard for dependability, ease of
operation, and operator safety. When properly cared for, the router will give you years of rugged, trouble-free
performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFE
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS ■■ ■■■ Introduction .................................................................................................................................................................... 2 ■■ ■■■ General Safety Rules.................................................................................................................................................. 3-4 ■■■■■ Specific Safety Rules .........................................................................................
ملخص المحتوى في الصفحة رقم 3
GENERAL SAFETY RULES ■■■■■ Avoid accidental starting. Be sure switch is off before WARNING: plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on, invites accidents. Read and understand all instructions. Failure to ■■■■■ Remove adjusting keys or wrenches before turning follow all instructions listed below, may result in elec- the tool on. A wrench or a key that is left attached to a tric shock, fire and/or serious personal injury. rotating part o
ملخص المحتوى في الصفحة رقم 4
GENERAL SAFETY RULES ■ When servicing a tool, use only identical replace- SERVICE ment parts. Follow instructions in the Maintenance ■■■■■ Tool service must be performed only by qualified section of this manual. Use of unauthorized parts or repair personnel. Service or maintenance performed failure to follow Maintenance Instructions may create a by unqualified personnel could result in a risk of injury. risk of electric shock or injury. SPECIFIC SAFETY RULES ■■■■■ Hold tool by insulated gripping
ملخص المحتوى في الصفحة رقم 5
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current --- Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction
ملخص المحتوى في الصفحة رقم 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. (Without Safe
ملخص المحتوى في الصفحة رقم 7
ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three-wire a power source, be sure to use an extension cord that grounded power cord. All exposed metal parts are has the capacity to handle the current the tool will draw. isolated from the internal metal motor components with An undersized cord will cause a drop in line voltage, protecting
ملخص المحتوى في الصفحة رقم 8
FEATURES SPECIFICATIONS Depth of Cut ....................................................................................................................................0 - 1-1/2 in. (0 - 38 mm) Collet .............................................................................................................................................................. 1/4 in. (6 mm) Peak Horsepower ............................................................................................................
ملخص المحتوى في الصفحة رقم 9
FEATURES SWITCH LOCKING ARM DEPTH ADJUSTMENT RING GOLD SPINDLE LOCK BUTTON HANDLE CHIP SHIELD Fig. 1 UNPACKING INSTRUCTIONS WARNING: When unpacking the tool: If any parts are missing do not operate the tool until the ■ Carefully remove the tool and accessories from the box. missing parts are replaced. Failure to do so could result ■ Make sure that all items listed in the packing list are in- in possible serious personal injury. cluded. ■ Inspect the tool carefully to make sure no breakage or dam
ملخص المحتوى في الصفحة رقم 10
OPERATION WARNING: Exercise caution when using this tool. Careless actions, for even a fraction of a second, can result in serious ON personal injury. You may use the router for the purposes listed below: OFF ■ Routing Grooves, shaping edges, etc. in wood. ■ Chamfering, rabbeting, dadoing, and dovetailing in wood. Fig. 2 ■ Routing edges on plastic laminates. WARNING: Always wear safety goggles or safety glasses with side shields when using your router. Failure to do so could result in dust, shav
ملخص المحتوى في الصفحة رقم 11
1/32 1 2 15/32 OPERATION WARNING: Never connect the router to power supply when you are assembling parts, making adjustments, installing or re- moving cutters, or when not in use. Disconnecting the router prevents accidental starting that could cause se- rious injury. REMOVING AND INSTALLING THE ROUTER BASE TO REMOVE THE ROUTER BASE See Figure 4. 1. Unplug the router. LOCKING DEPTH ARM ADJUSTMENT WARNING: RING Failure to unplug the tool could result in accidental start- ing causing serious injur
ملخص المحتوى في الصفحة رقم 12
OPERATION REMOVING/INSERTING CUTTERS See Figure 5. Follow these steps to remove or insert cutters. TO 1. Unplug the router. LOOSEN WARNING: Failure to unplug the tool could result in accidental start- ing causing serious injury. TO TIGHTEN CAUTION: To prevent damage to the spindle or spindle lock, al- ways allow the motor to come to a complete stop before engaging the spindle lock. 2. Place the router upside down on a workbench in order to gain easy access to collet nut. 3. Depress the gold spin
ملخص المحتوى في الصفحة رقم 13
1/32 1 2 15/32 OPERATION ADJUSTING DEPTH OF CUT Proper depth of cut depends on several factors: the peak horsepower of the router motor, the type of cutter, and the type of wood. A lightweight, low horsepower router is designed for making shallow cuts. A router with a high horsepower rating can safely cut deeper. Small cutters, such as veining bits with 1/16 in. (1.6 mm) cutting diameters, are designed to remove only small amounts of wood. Large cutters, such as straight-flute bits, are made to
ملخص المحتوى في الصفحة رقم 14
OPERATION FEEDING THE ROUTER 5 6 The “secret” of professional routing and edge shaping lies in making a careful set-up for the cut and in selecting the proper rate of feed. 3 DIRECTION (EXTERNAL) See Figure 8. 4 2 PROPER CUTTING SEQUENCE When routing, the cutter rotates clockwise. Therefore, you should feed the router into the workpiece from left to right. When you feed the router from left to right, the 1 rotation of the cutter pulls the router against the workpiece. If you feed the router in
ملخص المحتوى في الصفحة رقم 15
OPERATION RATE OF FEED The proper rate of feed depends on several factors: the hardness and moisture content of the wood, the depth of cut, and the cutting diameter of the bit. When cutting shallow grooves in soft woods such as pine, a faster rate of feed can be used. When making deep cuts in hardwoods such as oak, a slower rate of feed should be used. TOO FAST The best rate of feed is one that does not slow down the Fig. 10 router motor more than one-third of its no-load speed. If the router is
ملخص المحتوى في الصفحة رقم 16
OPERATION DETERMINING DEPTH OF CUT See Figure 12. DEPTH As previously mentioned, the depth of cut is important WIDTH OF CUT because it affects the rate of feed that, in turn, affects the OF CUT quality of the cut (and, also, the possibility of damage to your router motor and bit). A deep cut requires a slower feed than a shallow one, and a too deep cut will cause you to slow the feed so much that the bit is no longer cutting, it is scraping, instead. Making a deep cut is never advisable. The sma
ملخص المحتوى في الصفحة رقم 17
OPERATION When routing a groove wider than the diameter of the cutter, clamp a straightedge on both sides of the cutlines. Position both guides parallel to the desired line of cut and spaced equal distances from the desired edges of the groove. Rout along one guide; then, reverse direction and rout along the other guide. Clean out any remaining waste in the center of the groove freehand. ROUTING BY FREEHAND See Figure 14. When used freehand, your router becomes a flexible and versatile tool. Thi
ملخص المحتوى في الصفحة رقم 18
OPERATION EDGING WITH PILOTS ROUTER See Figure 15. You can cut rabbets and molded edges using piloted cutters. The pilot, which extends below the cutter, allows the cutter to turn while the pilot follows the edge of the workpiece. Some pilots are solid extensions of the cutter. Others are ball bearing guides that are fastened to the PILOT end of the cutter. Arbor-type bits with pilots are excellent for quick, easy edge shaping. They follow workpiece edges that are WORK either straight or curved.
ملخص المحتوى في الصفحة رقم 19
MAINTENANCE WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most CUTTERS plastics are susceptible to damage from various types of Get faster and more accurate cutting results by keeping commercial solvents and may be damaged by their use. cutters clean and sharp. Remove all accumulated pitch Use clean cloths to remove dirt, carbon dust, etc. and gum
ملخص المحتوى في الصفحة رقم 20
OPERATOR'S MANUAL R1801M1 ROUTER With R181FB1 Fixed Base Double Insulated SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our Web site at www.ryobitools.com for a complete list of Authorized Service Centers. MODEL NO. AND S
