ملخص المحتوى في الصفحة رقم 1
OWNER'S
MANUAL
MODEL NOS.
315.175040
315.175050
MODEL NO. 315.175050
315.175060
CAUTION:
Read and follow
ALL safety rules
MODEL NO. 315.175060
and instructions
before operating
CRRFTSMRNo
this equipment.
Router
Double Insulated
Features
Warranty
Thank You for Buying A
Rules For Safe Operation Operation
Craftsman Router
Table Of Contents
Accessories
Introduction
Maintenance (_
Repair Parts
Unpacking
SEARS, ROEBUCK AND CO., Hoffman Estates, IL 60179 U.S.A.
972000-248
7-00 Printed in U.S.A.
ملخص المحتوى في الصفحة رقم 2
FULL ONE YEAR WARRANTY ON CRAFTSMAN ROUTER If this Craftsman Router fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will repair it, free of charge. If this Craftsman Router is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sear
ملخص المحتوى في الصفحة رقم 3
,WARNING: WARNING: Do not attempt to operate this tool until you have The double insulated system is intended to protect the read thoroughly and understand completely all user from shock resulting from a break in the tool's instructions, safety rules, etc. contained in this internal wiring. Observe all normal safety precautions manual. Failure to comply can result in accidents related to avoiding electrical shock. involving fire, electric shock, or serious personal injury. Save owner's manual a
ملخص المحتوى في الصفحة رقم 4
RULES FOR SAFE OPERATION (Continued) 22. OUTDOOR USE EXTENSION CORDS. When tool 33. DRUGS, ALCOHOL, MEDICATION. Do not is used outdoors, use only extension cords suitable operate tool while under the influence of drugs, alcohol, or any medication. for use outdoors. Outdoor approved cords are marked with the suffix W-A, for example - SJTW-A 34. WHEN SERVICING USE ONLY IDENTICAL or SdOW-A. CRAFTSMAN REPLACEMENT PARTS. 23. KEEP CUTTERS CLEAN AND SHARP. Sharp 35. POLARIZED PLUGS. To reduce the risk
ملخص المحتوى في الصفحة رقم 5
• Warranty ................................................ 2 Proper Feeding ..................................... 14 • Rules For Safe Operation ................. 2-4 Speed Selections (Model Noso • Table Of Contents ................................. 5 315.175050 and 315.175060 Only) ...... 14 Rate Of Feed ........................................ 14 • Introduction and Product Force Feeding ...................................... 14 Specifications ....................................... 6 Too Slow
ملخص المحتوى في الصفحة رقم 6
Congratulations and thank you for buying this Craftsman router. It has been designed, engineered and CAUTION: manufactured to provide you with Sears high standard of dependability, ease of operation, and operator safety. Carefully read through this entire owner's manual before Properly cared for, it will give you years of rugged, trouble- using your new router. Pay close attention to the Rules free performance. For Safe Operation, Warnings and Cautions. If you use Your router has many features f
ملخص المحتوى في الصفحة رقم 7
Your router has been shipped completely assembled and ready for use. Inspect it carefully to make sure no breakage WARNING: or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Sears Retail If any parts are missing, do not operate your router until Store to obtain replacement parts before attempting to the missing parts are replaced. Failure to do so could operate router. A wrench and this owner's manual are also result in possible serious personal in
ملخص المحتوى في الصفحة رقم 8
KNOW YOUR ROUTER Before attempting to use your router, familiarize yourself with WARNING: all operating features and safety requirements. See Figure I. Always wear safety goggles or safety glasses with side shields when operating your router. Failure to do so could WARNING: result indust, shavings, loose particles or foreign objects being thrown into your eyes, causing possible serious Do not allow familiarity with your router to make you injury. careless. Remember that a careless fraction of a
ملخص المحتوى في الصفحة رقم 9
UPSIDE DOWNVIEW OF ROUTER DEPTH WRENCH INDICATOR WRENCH POINT STORAGE RING AREA SPINDLE POWER HANDLE SWITCH HANDLE TRIGGER_ LOCK-ON BUTTON LOCKING KNOB /ARIABLESPEED CONTROLSELECTOR DEPTH ADJUSTING RING DEPTH INDICATORRING INDICATOR SUBBASE POINT MODEL NO, 315.175050 Fig, 1b CHIP SHIELD UPSIDE DOWN VIEW OF ROUTER WRENCH WRENCH DEPTH INDICATOR SPINDLE STORAGEAREA INDICATOR POINT RING BLOWER MODEL NO. 315.175060 Page 9
ملخص المحتوى في الصفحة رقم 10
WARNING: _PINDL LOCI_ Your router should never be connected to power supply when you are assembling parts, making adjustments, \ installing or removing cutters, or when not in use. Disconnecting your router will prevent accidental starting that could cause serious injury. INSTALLING/REMOVING CUTTERS See Figures 2 and 3. • UNPLUG YOUR ROUTER. WARNING: Failure to unplug your router could result in accidental < starting causing serious injury. TO LOCK PUSHIN TO TO UNLOCK SPINDLE LOCKANDUNLOCK SPIND
ملخص المحتوى في الصفحة رقم 11
DEPTH OF CUT ADJUSTMENTS See Figures 4, 5, and 6. We recommend that cuts be made at a depth not exceeding 1/8 in. and that several passes be made to reach depths of cut greater than 1/8 in. • UNPLUG YOUR ROUTER, [ ,WARNING: Failure to unplug your router could result in accidental I starting causing serious injury. • Place your router on a flat surface, loosen locking knob, and turn depth adjusting ring until cutter is inside subbase. See Figure 4. • Turn depth adjusting ring until tip of cutter
ملخص المحتوى في الصفحة رقم 12
DEPTH OF CUT ADJUSTMENTS WHEN FORROUTERTABLEUSEONLY ROUTER IS MOUNTED TO A ROUTER TABLE See Figure 7. DEPTH The depth of cut is readable from both sides of the depth INDICATORRING indicator ring. The bottom ring is convenient when using your router mounted upside down to a router table. The indicator point on the base can also be used when using your router mounted to a router table. Set the cutter at zero depth of cut, rotate depth indicator ring to desired depth of cut on the scale, then tight
ملخص المحتوى في الصفحة رقم 13
ROUTING See Figure 9. For ease of operation and maintaining proper control, your router has two handles, one on each side of the router base. When using your router hold it firmty with both hands as shown in figure 9. Turn router on and let motor build to its full speed, then gradually feed cutter into workpiece. Remain alert and watch what you are doing. DO NOT operate router when fatigued. FREEHAND ROUTING See Figure 10. When used freehand, your router becomes a flexible and versatile tool. Th
ملخص المحتوى في الصفحة رقم 14
PROPER FEEDING The right feed is neither too fast nor too slow. It is the rate at which the bit is being advanced firmly and surely to produce a continuous spiral of uniform chips --without hogging into the wood to make large individual chips or, on the other hand, to create only sawdust. If you are making a small diameter, shallow groove in soft, dry wood, the proper feed may be about as fast as you can travel your router along your guide line. On the other hand, if the bit is a large one, the
ملخص المحتوى في الصفحة رقم 15
DEPTH OF CUT As previously mentioned, the depth of cut is important ---_, Iq_ WIDTH DEPTH because it affects the rate of feed which, in turn, affects the OF CUT quality of a cut (and, also, the possibility of damage to your r:l-°,cu, router motor and bit). A deep cut requires a slower feed than a shallow one, and a too deep cut will cause you to slow the feed so much that the bit is no longer cutting, it is scraping, instead. Fig, 12 Making a deep cut is never advisable. The smaller bits -- 1ST.
ملخص المحتوى في الصفحة رقم 16
STARTING AND ENDING A CUT INTERNAL ROUTING ROUTER Tilt router and place on workpiece, letting edge of subbase WORK contact workpiece first. Be careful not to let router bit contact workpiece. Turn router on and let motor build to its full speed. Gradually feed cutter into workpiece until subbase is level with workpiece. PILOT WARNING: Keep a firm grip on router with both hands at all times. TOPEDGESHAPING Failure to do so could result in loss of control leading to possible serious injury. Upon c
ملخص المحتوى في الصفحة رقم 17
ROUTING WITH GUIDE BUSHINGS ROUTER TABLES When using the Template Guide Bushings Item No. 9-25082 The use of Craftsman routers on router tables offered by with your router, you must visually center the bit with the other manufacturers has not been investigated for compli- bushing before beginning your cut. You r router subbase may ance with applicable safety standards. be adjusted by loosening the screws holding the subbase to your router. Be sure clamping lever is locked before center- WARNING
ملخص المحتوى في الصفحة رقم 18
SWITCH REPLACEMENT (CONTINUED) (MODEL NOS. 315.175050 AND 315.175060) c See Figures 18 and 19. • UNPLUG YOUR ROUTER. D Failure to unplug your router could result in accidental WARNING: 1 starting causing serious injury. Remove screws (A) and handle cover (Bl, See Figure 18. Note the location of the molded bend relief (C) on the power handle cord. Also note all wiring in the handle and how each lead is connected to the switch, Connections and wiring position must be identical when installing new
ملخص المحتوى في الصفحة رقم 19
LIGHT BULB REPLACEMENT See Figure20. • UNPLUG YOUR ROUTER. WARNING: Failure to unplug your router could result in accidental starting causing serious injury. I • Remove cutter from router. • Adjust router to maximum height. • Remove screws (A) and subbase (B). See Figure 20. • Remove screw (C) and work light lens (D). • With bulb (E) pointing toward you, push bulb in and turn to the left to remove from bulb socket. NOTE: Light bulb removal and installation is similar to removing and installing a
ملخص المحتوى في الصفحة رقم 20
WARNING: WARNING: When servicing use only identical Craftsman replacement pads. Use of any other parts may create a hazard or cause product damage. i GENERAL EXTENSION CORDS Only the parts shown on parts list, pages 23, 25 and 27 are The use of any extension cord will cause some loss of power. intended to be repaired or replaced bythe customer. All other To keep the loss to a minimum and to prevent tool overheating, parts represent an important part of the double insulation use an extefision cor
