Bushnell PRO-9056N دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model PRO-9056N
Owner’s Manual
Single Channel Remote
Car Starter
FEATURES :
2 Programmable RF Transmitters
Single Channel Receiver (capable of accepting 4 transmitters)
On-Board Start Relay
On-Board Accessory Relay
On-Board Ignition 1 Relay
On-Board Ignition 2 Relay
Ignition 2 Relay Selectable On or Off During Cranking
On-Board Parking Light Relay
Ignition 3 / Shock By-Pass / GM VAT Output (relay required)
Tach Signal Learning Circuit
Two ( + ) and Two ( - ) Safety Shutdown Circuits

ملخص المحتوى في الصفحة رقم 2

REMOTE STARTING THE VEHICLE This will not start the vehicle if any one of the following situations exists; The vehicle's hood lid is opened. The gear shift selector is not in Park. The brake pedal is depressed. The safety control switch is in the Off position. 1. To start the vehicle, press and release the transmitter button two times within 2 seconds. The vehicle will start and remain running for the pre-programmed 5,10,15,20 minute run cycle. As a visual indication, the parking lights will