Audiovox PRO-9276C دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model PRO-9276C
Owner’s Manual
7 Channel Remote Car Starter
FEATURES :
 2 Five Button Programmable RF Transmitters
 Seven Channel Receiver (capable of accepting 4 transmitters)
 Code Hopping Technology
 External SuperheterodyneReceiver Antenna w/PushButton Switch &
LED
 Safe Start RF Control (Double Push Of RF Transmitter)
 Selectable Automatic Timed Start Mode
 ( + ) and ( - ) Keyless Entry Outputs
 On-Board Start Relay
 On-Board Accessory Relay
 3 On-Board Ignition Relays
 On-Bo

ملخص المحتوى في الصفحة رقم 2

YOUR "CODE HOPPING" TRANSMITTERS The transmitters included with your new remote start system use the most advanced and secure form of radio frequency transmission available on any current automotive remote system. Some of today’s sophisticated auto thieves use a device known as a code grabber, which will receive and store the signal from your keychain transmitter and re-transmit at a later time to unlock your system. Your code hopping transmitters will change their signal every time the button i

ملخص المحتوى في الصفحة رقم 3

To activate the optional accessory, press and hold the trunk/key button on the keychain transmitter for four seconds. NOTE: The feature that has been added to channel 3 will always be activated using the same transmitter button that remotely starts the vehicle. There is no way to move the channel 3 function to a different transmitter button. ADDITIONAL REMOTE FUNCTION (CHANNEL 4) This system has an additional feature that can be connected to a number of different optional accessories. Some of t

ملخص المحتوى في الصفحة رقم 4

PUSH-BUTTON LED RECEIVER VALET/OVERRIDE/SAFETY CONTROLSWITCH The Push-Button LED switch located in the receiver allows you to temporarily disable the remote starting function of the system. This recommended whenever the vehicle is being serviced. To place the system in the service mode: 1) With the system disarmed/unlocked, and the ignition switch off Press and Hold the Push-Button, found on the windshield receiver, in. 2) Turn the ignition switch on, off, on, off, on, off. 3) The LED begins to

ملخص المحتوى في الصفحة رقم 5

WARNING! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if the car is garaged. To Remote Start The Vehicle: Press and release the trunk/key button of your keychain transmitter two times within 2 seconds. The vehicle will start and remain running for the pre-programmed 5, 10, 15 or 20 minutes. As

ملخص المحتوى في الصفحة رقم 6

3. Within 10 seconds of step 2, activate the RF start command two times. (Push the trunk/ key button of your keychain transmitter 4 times). The parking lights will flash and the siren will chirp 4 times indicating the timed start mode is activated. CANCELING THE AUTOMATIC START UP TIMER To cancel the automatic start up timer do one of the following; 1. Start the vehicle manually with the use of the ignition key and depress the brake pedal. 2. Remote start the vehicle using your keychain RF tran

ملخص المحتوى في الصفحة رقم 7

THIS PAGE LEFT BLANK INTENTIONALLY Page 7 128-8785 7 of 8

ملخص المحتوى في الصفحة رقم 8

© 2010 Audiovox Electronics Corporation, Hauppauge, NY 11788 128-8785 Page 8 128-8785 8 of 8