Audiovox Prestige APS-620N دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model APS-620N
Owner’s Manual
KEYLESS ENTRY OPERATION
The Lock button on the transmitter is used to lock the vehicle's doors, the Unlock button
is used to unlock the vehicle's doors. To lock or unlock the doors simply press and
release the desired function button one time. As a keyless entry unit, when the doors
are locked, for your convenience, the parking lights and or vehicle horn will flash/beep
once. When the doors are unlocked the parking lights and or vehicle horn will flash/beep
twic

ملخص المحتوى في الصفحة رقم 2

OPERATING ON AUTOMATIC START UP TIMER MODE Your system has the ability to automatically start the vehicle every 2 or 4 hours over a 48 hour period. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine. WARNING! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if pr

ملخص المحتوى في الصفحة رقم 3

The unit will flash the parking lights and or beep the horn once to indicate that the system is in the transmitter program mode. The LED will also flash one time pause, one time pause, etc... indicating that you are in the transmitter program mode of the unit’s channel 1 or single button program mode. 3) Press and hold any combination of buttons of your transmitter that was not used for your primary vehicle. If, for instance you can press & hold the lock & unlock buttons simultaneously, for co

ملخص المحتوى في الصفحة رقم 4

BATTERY REPLACEMENT The transmitter incorporates a small LED visible through the case which is used to indicate battery condition. You will notice a decrease in transmitter range as the battery condition deteriorates. Transmitter battery replacement is recommended at least every 10 to 12 months, depending upon how frequently the transmitter is used. To replace the battery in the 91P Transmitter 1) Carefully Separate apart the case using the edge of a coin as shown. 2) Remove the rear cover to