ملخص المحتوى في الصفحة رقم 1
318205825 (February 2012) Rev. B
All about the
Use & Care
of your Built-In Range
TABLE OF CONTENTS
Welcome & Congratulations ...................................2 Setting Oven Controls ..........................................17
Important Safety Instructions .................................3 Setting Keep Warm Drawer Control (If equipped) ..35
Features at a Glance ..............................................6 Care & Cleaning (Cleaning Chart) .........................36
Before Setting Surface
ملخص المحتوى في الصفحة رقم 2
WELCOME & CONGRATULATIONS Congratulations on your purchase of a new appliance! At Product Registration Electrolux Home Products, we are very proud of our Register Your Product product and are completely committed to providing you with the best service possible. Your satisfaction is our The PRODUCT number one priority. REGISTRATION CARD should be fi lled in completely, We know you’ll enjoy your new appliance and Thank You signed and returned to for choosing our product. We hope you consid
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. • Remove all tape and packaging wrap before using the appliance. Destroy the carton and plastic Save these instructions for future reference. bags after unpacking the appliance. Never allow DEFINITIONS children to play with packaging material. Do not remove This is the safety alert symbol. It is used to alert the wiring label and other literature attached to the you to potential personal injury hazards. Obey a
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT CAUTION Do not attempt to operate the appliance during a Do not store items of interest to children in the power failure. If the power fails, always turn off cabinets above the appliance. Children climbing on the unit. If the unit is not turned off and the power the cooktop to reach items could be seriously injured. resumes, the appliance will not operate and an error message will be displayed. Once the power resumes, • Do not leave children alone.
ملخص المحتوى في الصفحة رقم 5
IMPORTANT SAFETY INSTRUCTIONS utensils are suitable for cooktop service without breaking pot holders contact the hot oven element or interior of due to the sudden change in temperature. Check the the oven/Warm & Serve Drawer (if equipped). manufacturer’s recommendations for cooktop use. • Do not use a broiler pan without its insert. Broiler • Do Not Use Decorative Surface Burner Covers. pan and grid allow dripping fat to drain and be kept If an element is accidentally turned on, the decorativ
ملخص المحتوى في الصفحة رقم 6
FEATURES AT A GLANCE - MODEL A Your built-in range Features: keep wzaornme dstealarty ba tim ke e 1 2 3 hi set med clock 4 5 6 low bake broil convect prqeuhicekat w keaerm p 7 8 9 chicken self convect start cancel on·off nuggets clean convert 0 1. Electronic oven control with kitchen timer. 2. Left front element control. 3. Left rear element control. 4. Right rear element control. 10 9 5. Right front element control. 8 6. Keep warm zone control. 11 7. Element on indicator light. 12 14 8. Automat
ملخص المحتوى في الصفحة رقم 7
FEATURES AT A GLANCE - MODEL B keep wzaornme de stalarty ba tim ke e 1 2 3 Your built-in range Features: hi set med clock 4 5 6 bake broil convect prqu ehicekat w keaerm p low 7 8 9 chicken self convect start cancel on·off nuggets clean convert 0 1. Electronic oven control with kitchen timer. 2. Electronic element control digital displays. 3. Keep warm zone control. 4. Warm & serve drawer control. 13 12 5. Left front element control. 11 6. Left rear element control. 14 7. Right rear element cont
ملخص المحتوى في الصفحة رقم 8
FEATURES AT A GLANCE - MODEL C delay bake keep warm Your built-in range Features: start time 1 2 3 drawer hi set clock 4 5 6 med powerplus keep my bake broil convect preheat warm low favorite 7 8 9 chicken self convect add start cancel pizza nuggets clean convert amin 0 on·off 1. Electronic oven control with kitchen timer. 2. Left rear burner control. 3. Keep warm zone control. 4. Warm & serve drawer control. 13 5. Left front element control. 12 11 6. Left rear element control. 15 7. Right rear
ملخص المحتوى في الصفحة رقم 9
BEFORE SETTING SURFACE CONTROLS Model A only: About the ceramic glass cooktop The hot surface indicator light located on the cooktop The ceramic cooktop has radiant surface elements (Figure 2) will glow when any surface cooking area heats located below the surface of the glass. The design of the up and will remain on until the glass cooktop has cooled ceramic cooktop outlines the area of the surface element to a MODERATE level. underneath. Be sure to match the pan size with the diameter o
ملخص المحتوى في الصفحة رقم 10
BEFORE SETTING SURFACE CONTROLS The electronic surface element control (ESEC) (Models B & C only) The Electronic Surface Element Control (ESEC) feature includes digital display windows. The ESEC feature provides a numeric digital setting for the radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work Fig. 2 except the settings are displayed in digital windows. The available ESEC display settings The ESEC control provides var
ملخص المحتوى في الصفحة رقم 11
BEFORE SETTING SURFACE CONTROLS Using proper cookware Cookware material types The size and type of cookware used will infl uence the The cookware material determines how evenly and quickly setting needed for best cooking results. Be sure to follow heat is transferred from the surface element to the pan the recommendations for using proper cookware as bottom. The most popular materials available are: illustrated in Figures 1 & 2. Aluminum- Excellent heat conductor. Some types Cookware should ha
ملخص المحتوى في الصفحة رقم 12
SETTING SURFACE CONTROLS Single radiant surface elements (all models) The cooktop has 2 or 3 SINGLE radiant surface elements: the left rear position (Figures 1, 2 & 3), the right rear position (Figures 1 and 2), and the right front position (Figures 1 and 3). The left rear element may also be used with the Bridge element (Model C only - Figure 3). To Operate the Single Radiant Surface Elements Figure 1 - Model A Figure 2 - Model B 1. Place correctly sized cookware on the radiant surface ele
ملخص المحتوى في الصفحة رقم 13
SETTING SURFACE CONTROLS Dual Surface Radiant Element (all models) The cooktop is equipped with 1 or 2 dual radiant surface elements located at the left front (Figures 1& 2) and the right front (Figure 2) or the right rear (Figure 3) position. Symbols around the knob are used to indicate which coil of the dual radiant element will heat. The symbol indicates that only the inner coil will heat (Figure 4). The symbol indicates that both inner and outer Figure 1 - Model A Figure 2 - Model B
ملخص المحتوى في الصفحة رقم 14
SETTING SURFACE CONTROLS Bridge surface radiant element (Model C only) The cooktop is equipped with a “BRIDGE” surface element located at the left front and middle (Fig. 1) positions. The Bridge can be used when cooking with rectangular (like a griddle) or oval shaped cookware. The element will maintain an even temperature setting across both portions of the Bridge. If needed for normal cookware, the Bridge element can work like a single element without the Bridge (Fig. 4). The symbol i
ملخص المحتوى في الصفحة رقم 15
SETTING SURFACE CONTROLS Keep warm zone (Models B & C only) CAUTION The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm The keep warm zone will not glow red when it is hot, feature to keep cooked foods hot such as: vegetables, but becomes hot enough to cause burns. Avoid placing gravies, casseroles, soups, stews, breads, pastries and hands on or near the keep warm zone until the keep oven-safe dinner plates. warm zone hot surface indicat
ملخص المحتوى في الصفحة رقم 16
BEFORE SETTING OVEN CONTROLS Oven vent location Arranging oven racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS The oven is vented as shown below. When the oven is COOL (PRIOR TO OPERATING THE OVEN). Always use on, warm air is released through the vent. This venting is oven mitts when using the oven. necessary for proper air circulation in the oven and good To remove an oven rack, pull the rack forward until it baking results. DO NOT BLOCK OVEN VENT. Never stops. Lift up front of rack and
ملخص المحتوى في الصفحة رقم 17
BEFORE SETTING OVEN CONTROLS Types of oven racks CAUTION Your built-in range may be equipped with one or more of the oven racks styles shown; Always use pot holders or oven mitts when adjusting the • Flat handle oven rack (All models- Figure 1). oven racks. Wait until the oven has completely cooled if possible. Oven racks may be HOT and may cause burns. • Offset oven rack (Model A only- Figure 2). • Flat oven half rack (Models B & C only- Figures 3 & 4). The Flat Oven Handle Rack has an hand
ملخص المحتوى في الصفحة رقم 18
BEFORE SETTING OVEN CONTROLS The Effortless™ oven rack system D Do oo or r R Ra ac ck k Some models are equipped with a special oven rack c co on nn ne ec ct to or r c co on nn ne ec ct to or r b br ra ac ck ke et t system that automatically partially extends the oven rack b br ra ac ck ke et t from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed. F Fi ig gu ur re e 2 2 To assemble the Effortless™ Oven R
ملخص المحتوى في الصفحة رقم 19
SETTING OVEN CONTROLS Control pad features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide. 1 2 18 1 2 18 delay bake delay bake 1 2 3 1 2 3 start time start time 3 4 set set clock 4 5 6 4 5 6 clock 8 9 10 11 12 8 9 10 11 12 powerplus keep quick keep 3 4 5 bake broil convect pre
ملخص المحتوى في الصفحة رقم 20
SETTING OVEN CONTROLS MINIMUM AND MAXIMUM CONTROL PAD SETTINGS All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds). An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature. FEATURE MINIMU
