ملخص المحتوى في الصفحة رقم 1
318205804 (July 2009) Rev. B
All about the
Use & Care
of your Built-In Range
TABLE OF CONTENTS
Welcome & Congratulations ...................................2 Setting Oven Controls ..........................................19
Important Safety Instructions .................................3 Setting Keep Warm Drawer Control (If equipped) ..35
Features at a Glance ..............................................6 Care & Cleaning (Cleaning Chart) .........................36
Before Setting Surface Con
ملخص المحتوى في الصفحة رقم 2
Welcome & congratulations Congratulations on your purchase of a new appliance! At Product registration electrolux Home Products, we are very proud of our register Your Product product and are completely committed to providing you with the best service possible. Your satisfaction is our The Product number one priority. registration card should be filled in completely, We know you’ll enjoy your new appliance and thank You signed and returned to for choosing our product. We hope you consid
ملخص المحتوى في الصفحة رقم 3
imPortant saFetY instructions Read all instructions before using this appliance. edition and local code requirements. Install only per installation instructions provided in the literature Save these instructions for future reference. package for this range. deFinitions Ask your dealer to recommend a qualified technician This is the safety alert symbol. It is used to alert and an authorized repair service. Know how to you to potential personal injury hazards. Obey all safety disconne
ملخص المحتوى في الصفحة رقم 4
imPortant saFetY instructions • DO NOT TOUCH SURFACE UNITS, AREAS NEAR tHese units, oven Heating elements or caution interior surFaces oF tHe oven or Warmer electronic controllers can be damaged by cold DRAWER (if equipped). Both surface units and oven t emperatures. Wh en you use your appliance for heating elements may be hot even though they are t he first t ime, or if it has not been used for a long dark in color. Areas near surface units may become period of time, m ak e sure t ha
ملخص المحتوى في الصفحة رقم 5
imPortant saFetY instructions • Do not touch a hot oven light bulb with a damp For glass cooktoP onlY cloth. Doing so could cause the bulb to break. • Do Not Clean or Operate a Broken Cooktop— If Disconnect the appliance or shut off the power to the cooktop should break, cleaning solutions and spillovers appliance before removing and replacing the bulb. may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately. imPortant saFetY instr
ملخص المحتوى في الصفحة رقم 6
Features at a glance - model a Your built-in range Features: 1. Electronic oven control with kitchen timer. 2. Left front element control. 3. Left rear element control. 4. Right rear element control. 5. Right front element control. 6. Keep warm zone control. 7. Element on indicator light. 8. Automatic oven door light switch. 9. Self-clean door latch. 10. Oven vent. 11. Broil element. 12. Self-cleaning oven interior. 13. Convection bake cooking system. 14. Oven interior light with removable cov
ملخص المحتوى في الصفحة رقم 7
FEATURES AT A GLANCE - MODEL B Your built-in range Features: 1. Electronic oven control with kitchen timer. 2. Electronic element control digital displays. 3. Keep warm zone control. 4. Warm & serve drawer control. 5. Left front element control. 6. Left rear element control. 7. Right rear element control. 8. Right front element control. 9. Element on indicator light. 10. Cooktop on indicator light. 11. Automatic oven door light switch. 12. Self-clean door latch. 13. Oven vent. 14. Broil elemen
ملخص المحتوى في الصفحة رقم 8
Features at a glance - model c Your built-in range Features: 1. Electronic oven control with kitchen timer. 2. Electronic element control digital displays. 3. Keep warm zone control. 4. Warm & serve drawer control. 5. Left front element control. 6. Left rear element control. 7. Right rear element control. 8. Right front element control. 9. Element on indicator light. 10. Cooktop on indicator light. 11. Automatic oven door light switch. 12. Self-clean door latch. 13. Oven vent. 14. Oven interio
ملخص المحتوى في الصفحة رقم 9
BEFORE SETTING SURFACE CONTROLS Model A only : About the ceramic glass cooktop The hot surface indicator light located on the cooktop The ceramic cooktop has radiant surface elements (Figure 2) will glow when any surface cooking area heats located below the surface of the glass. The design of the up and will remain on until the glass cooktop has cooled ceramic cooktop outlines the area of the surface element to a MODERATE level. underneath. Be sure to match the pan size with the diamete
ملخص المحتوى في الصفحة رقم 10
BEFORE SETTING SURFACE CONTROLS the electronic surface element control (ESEC) (Models B & C only) The Electronic Surface Element Control (ESEC) feature includes digital display windows. The ESEC feature provides a numeric digital setting for the radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work Fig. 2 except the settings are displayed in digital windows. The available ESEC display settings The ESEC control provides var
ملخص المحتوى في الصفحة رقم 11
BEFORE SETTING SURFACE CONTROLS Using proper cookware Cookware material types The size and type of cookware used will influence the The cookware material determines how evenly and quickly setting needed for best cooking results. Be sure to follow heat is transferred from the surface element to the pan the recommendations for using proper cookware as bottom. The most popular materials available are: illustrated in Figures 1 & 2. aluminum- Excellent heat conductor. Some types Cookware should ha
ملخص المحتوى في الصفحة رقم 12
setting surFace controls single radiant surface elements (all models) The cooktop has 2 or 3 SINGLE radiant surface elements: the left rear position (Figures 1, 2 & 3), the right rear position (Figures 1 and 2), and the right front position (Figures 1 and 3). The left rear element may also be used with the Bridge element (Model C only - Figure 3). To Operate the Single Radiant Surface Elements Figure 1 - Model A Figure 2 - Model B 1. Place correctly sized cookware on the radiant surface ele
ملخص المحتوى في الصفحة رقم 13
setting surFace controls dual surface radiant element (all models) The cooktop is equipped with 1 or 2 dual radiant surface elements located at the left front (Figures 1& 2) and the right front (Figure 2) or the right rear (Figure 3) position. Symbols around the knob are used to indicate which coil of the dual radiant element will heat. The symbol indicates that only the inner coil will heat (Figure 4). The symbol indicates that both inner and outer Figure 1 - Model A Figure 2 - Model B
ملخص المحتوى في الصفحة رقم 14
setting surFace controls Bridge surface radiant element (Model C only) The cooktop of your appliance is equipped with a “BRIDGE” surface element located at the left front and middle (Fig. 1) positions. The Bridge can be used when cooking with rectangular (like a griddle) or oval shaped cookware. The element will maintain an even temperature setting across both portions of the Bridge. If needed for normal cookware, the Bridge element can work like a single element without the Bridge (Fig.
ملخص المحتوى في الصفحة رقم 15
setting surFace controls Keep warm zone (Models B & C only) caution The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm The keep warm zone will not glow red when it is hot, feature to keep cooked foods hot such as: vegetables, but becomes hot enough to cause burns. Avoid placing gravies, casseroles, soups, stews, breads, pastries and hands on or near the keep warm zone until the keep oven-safe dinner plates. warm zone hot surface indica
ملخص المحتوى في الصفحة رقم 16
BEFORE SETTING OVEN CONTROLS Oven vent location Arranging oven racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS The oven is vented as shown below. When the oven is COOL (PRIOR TO OPERATING THE OVEN). Always use on, warm air is released through the vent. This venting is oven mitts when using the oven. necessary for proper air circulation in the oven and good To remove an oven rack, pull the rack forward until it baking results. DO NOT BLOCK OVEN VENT. Never stops. Lift up front of rack and
ملخص المحتوى في الصفحة رقم 17
BEFORE SETTING OVEN CONTROLS Types of oven racks caution Your built-in range may be equipped with one or more of the oven racks styles shown; Always use pot holders or oven mitts when adjusting the • Flat handle oven rack (All models - Figure 1). oven racks. Wait until the oven has completely cooled if possible. Oven racks may be HOT and may cause burns. • Offset oven rack (Model A only - Figure 2). • Flat oven half rack (Models B & C only - Figures 3 & 4). The Flat Oven Handle Rack has a
ملخص المحتوى في الصفحة رقم 18
BEFORE SETTING OVEN CONTROLS The Effortless™ oven rack system D Do oo or r R Ra ac ck k Some models are equipped with a special oven rack c co on nn ne ec ct to or r c co on nn ne ec ct to or r b br ra ac ck ke et t system that automatically partially extends the oven rack b br ra ac ck ke et t from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed. F Fi ig gu ur re e 2 2 To assemble the Effortless™ Oven R
ملخص المحتوى في الصفحة رقم 19
setting oven controls Control pad features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. detailed instructions for each feature and function follow later in this use & care guide. Figure 1 - Model A & B Figure 2 - Model C 1. delay start pad—Use to program a Delayed Timed 12. Keep warm pad—Use to keep the dishes and food Bake or Delay Self-Cleaning cycle start ti
ملخص المحتوى في الصفحة رقم 20
setting oven controls minimum and maximum control Pad settings All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds). An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature. Feature minimu
