ملخص المحتوى في الصفحة رقم 1
BarcoR10SLM
Owners Manual
R9010010
R5976563/03
20/10/2004
ملخص المحتوى في الصفحة رقم 2
B a r co n v E ve nts Noo rdl aan 5, B-8520 Kuurn e Phone: +32 56.36.8 9 .70 Fa x: +32 56.3 6 .88.24 E-mail : events@barco. com Visi t u s a t the w eb: www.barco.com PrintedinBelgium
ملخص المحتوى في الصفحة رقم 3
Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice. This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publicatio
ملخص المحتوى في الصفحة رقم 4
ملخص المحتوى في الصفحة رقم 5
1. Safety Instructions 1. SAFETY INSTRUCTIONS 1.1 Warnings To prevent personnel injury The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to BARCO. To prevent injuries and physical damage, always read this manual and all labels on the system before connecting to the wall outlet, or adjusting the projector. To prevent injuries, take note of the weight of the projector. Minimum 4 persons are needed to carry the projector. NE
ملخص المحتوى في الصفحة رقم 6
1. Safety In structions Extra Safety manual Read also safety instructions in separate manual (R5976125). 2 R597 6563 BARCO R1 0 S LM 20/10/2 004
ملخص المحتوى في الصفحة رقم 7
2. Packagin g and Dimensio ns 2. PACKAGING AND DIMENSIONS Overview • Projector Packaging • Box Content • Lamp Packaging • Lens Packaging • Projector Case 2.1 Projector Packaging Way of Packaging The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The package is secured with banding and fastening clips. To unpack 1. Release the fastening clips. 2. Remove the banding. Handle as shown in the drawing. (image 2-1) 3. Take the pr
ملخص المحتوى في الصفحة رقم 8
2 . Pa ck ag in g a nd Dim e ns ion s 2.3 Lamp Packaging Way of packaging As it is not allowed to transport the projector with the lamp mounted inside the projector, this lamp is packed in a separate carton box. Save this carton box , it can be used to repack the lamp when you ever have to transport your projector. 2.4 Lens Packaging Way of Packaging Lenses are supplied as an individual item. They are packed in a carton. 2.5 Projector Case Dimensions The dimensions are given in mm 25.4mm = 1 inc
ملخص المحتوى في الصفحة رقم 9
2. Packagin g and Dimensio ns Image 2-3 Side view dimensions R59 76563 BARC O R 1 0 S LM 20/10/ 2004 5
ملخص المحتوى في الصفحة رقم 10
2 . Pa ck ag in g a nd Dim e ns ion s 6 R597 6563 BARCO R1 0 S LM 20/10/2 004
ملخص المحتوى في الصفحة رقم 11
3 . Ins ta llation G u ide lin es 3. INSTALLATION GUIDELINES The engines are non sealed versions. 3.1 General WARNING: Before installing the projector, read first the safety instructions. Ambient Temperature Conditions. Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. Max. ambient temperature : 35°C or 95 °F Min. ambient temperature : 10 °C or 50 °F The projector will n
ملخص المحتوى في الصفحة رقم 12
3 . In sta lla tio n G u ide lin es Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a determined amount of light projected toward them. The ‘GAIN’ of a screen is the term used. Front and rear screens are both rated in terms of gain. The gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10) or more. The choice between higher and lower gain screens is largely a matter
ملخص المحتوى في الصفحة رقم 13
3 . Ins ta llation G u ide lin es Table mounted, front projection, second way. Table/Top side facing floor Projector SIDE VIEW Screen A SH PD Optical axis projection lens CD B Floor CD = SH/2 + B + A - 554mm SW Screen TOP VIEW SW SH Floor BACK VIEW Image 3-2 Table mounted configuration up side down Ceiling mounted, front projection Ceiling/Top side facing floor Ceiling CD B A PD SH Optical axis projection lens Projector CD = SH/2 + B - A Screen SIDE VIEW SW Screen CEILING VIEW Ceiling SH SW BACK
ملخص المحتوى في الصفحة رقم 14
3 . In sta lla tio n G u ide lin es Ceiling mounted, front projection, second way. Ceiling/Top side facing ceiling Ceiling B CD Screen Optical axis projection lens SH PD A Projector SIDE VIEW CD = SH/2 + B + A - 554mm SW Screen CEILING VIEW Ceiling SH SW BACK VIEW Image 3-4 Ceiling mounted projector 3.3 Safety Area around projector Safety area Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave a safety area A of about 1 meter on
ملخص المحتوى في الصفحة رقم 15
3 . Ins ta llation G u ide lin es A Image 3-5 Safety area around the projector R59 76563 BARC O R 1 0 S LM 20/10/ 2004 11
ملخص المحتوى في الصفحة رقم 16
3 . In sta lla tio n G u ide lin es 3.4 Projector tilting Turning around the projection axes (E) FRONT VIEW 15° 15° (D)Lamp Axis (C) Start point Image 3-6 Tilting diagram A Allowed Projector Tilting Area B Forbidden Projector Tilting Area C Start point D Lamp axis EFrontview Consider the starting point at the lamp side (input side), the following tilting is possible : • Maximum 15° upwards • Maximum 195° downwards (indicated by the allowed projector tilting area) Forwards and backwards tilting F
ملخص المحتوى في الصفحة رقم 17
3 . Ins ta llation G u ide lin es 3.5.1 Access to the Lamp Unit. What has to be done To access the lamp casing, a side panel has to be removed. Necessary tools A flatblade screwdriver of 5 mm Removing thesidepanel 1. Turn with a screwdriver the side panel lock screw a quarter turn counter clockwise. (image 3-7) 2. Pull the right side of the panel towards you and further to the right to remove. (image 3-8) Image 3-7 Unlocking the side cover Image 3-8 Pull and remove the side cover 3.5.2 Installat
ملخص المحتوى في الصفحة رقم 18
3 . In sta lla tio n G u ide lin es Necessary tools Flatblade screwdriver of 5mm or Nut driver 8mm Installing the lamp unit 1. Remove the lock nut on the 3 spacer screws (A). (image 3-9) 2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-10) 3. Secure the position of the lamp unit with the 3 spacer screws. (image 3-11) Image 3-9 Lamp unit, removing the lock nuts 14 R597 6563 BARCO R1 0 S LM 20/10/2 004
ملخص المحتوى في الصفحة رقم 19
3 . Ins ta llation G u ide lin es Image 3-10 Inserting the lamp Image 3-11 Securing the lamp 3.5.3 Reinstalling the Side Panel What has to be done After the new lamp unit has been installed, the side panel has to be remounted. Necessary tools A flatblade screwdriver of 5 mm Reinstalling the side panel 1. Move the cover guides under the back cover and push the front of the cover against the projector frame lining up the cover lock screw with the speed nut (A) on the frame. (image 3-12, image 3-13
ملخص المحتوى في الصفحة رقم 20
3 . In sta lla tio n G u ide lin es Image 3-12 Mounting the side cover Image 3-13 Closing the side cover Image 3-14 Locking thesidecover 3.6 Re-adjusting the lamp position in the lamp casing WARNING: As the projector has to be opened, this procedure has to be performed by qualified service tech- nician. Why With higher run times, the light output of the lamp will decrease, which results in a lower light output on the screen. This light output decrease can be compensated by readjusting the positi
