ملخص المحتوى في الصفحة رقم 1
MP512/MP513/MP522
Digital Projector
User Manual
Welcome
ملخص المحتوى في الصفحة رقم 2
Table of contents Operating in a high altitude Important safety environment.........................................38 instructions .........................3 Personalizing the projector menu display...................................................39 Introduction........................7 Shutting down the projector ...............39 Projector features .................................. 7 Menu operation ...................................40 Shipping contents..................................
ملخص المحتوى في الصفحة رقم 3
Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you 4. Always open the lens shutter or operate your projector. Save it for remove the lens cap when the future reference. projector lamp is on. 5. In
ملخص المحتوى في الصفحة رقم 4
Safety Instructions (Continued) 7. The lamp becomes extremely hot 10. Do not place this product on an during operation. Allow the unstable cart, stand, or table. The projector to cool for approximately product may fall, sustaining serious 45 minutes prior to removing the damage. lamp assembly for replacement. 11. Do not attempt to disassemble this 8. Do not operate lamps beyond the projector. There are dangerous high rated lamp life. Excessive operation voltages inside which may cause
ملخص المحتوى في الصفحة رقم 5
Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. - Do not place this projector on a blanket, bedding or any other soft surface. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance - Do not cover this projector with a cloth or from walls and free flow of air around the any other item. projector. - Do not place inflammables near the - Locations where temperatures may pr
ملخص المحتوى في الصفحة رقم 6
Safety Instructions (Continued) 17. Do not step on the projector or place Ceiling mounting the projector any objects upon it. Besides probable We want you to have a pleasant physical damage to the projector, doing experience using your BenQ projector, so may result in accidents and possible so we need to bring this safety matter injury. to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling, we strongly recommend that y
ملخص المحتوى في الصفحة رقم 7
Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Wall color correction allowing projection on surfaces of several predefined colors • Quick auto search speeding up the signal detecting process • Selectable password protected function • Up to 11 sets of picture modes providing multiple choices for different projection purposes
ملخص المحتوى في الصفحة رقم 8
Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *The warranty card and safety manual are only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* S
ملخص المحتوى في الصفحة رقم 9
Projector exterior view 1. External control panel Front/upper side (See "Projector" on page 10 for details.) 1 2. Vent (heated air exhaust) 3. Quick-release button 4. Lens cover 5. Focus ring and Zoom ring (Zoom ring is not available with the MP512.) 6. Front IR remote sensor 2 7. Projection lens 5 3 6 7 4 8. AC power cord inlet 9. RS-232 control port Rear/lower side 10. RGB signal output socket 11. RGB (PC)/Component video 8 9 10 11 12 13 14 (YPbPr/ YCbCr) signal input socket 12. Video inpu
ملخص المحتوى في الصفحة رقم 10
Controls and functions Projector 7. BLANK Used to hide the screen picture. See 1 "Hiding the image" on page 37 for details. 8. TEMPerature indicator light 2 8 Lights up red if the projector's 3 9 temperature becomes too high. See "Indicators" on page 53 for details. 10 4 9. LAMP indicator light 11 Indicates the status of the lamp. Lights up 5 12 or flashes when the lamp has developed a 13 problem. See "Indicators" on page 53 for 6 14 details. 10. AUTO 7 11 Automatically determines the best
ملخص المحتوى في الصفحة رقم 11
Remote control 7. Keystone/Arrow keys ( / Up, / Down) 6 Manually corrects distorted images 1 7 resulting from an angled projection. See "Correcting keystone" on page 30 for 2 8 details. 3 9 8. AUTO Automatically determines the best picture 10 4 timings for the displayed image. See 11 "Auto-adjusting the image" on page 29 for 7 details. 12 9. Right/ 5 Activates panel key lock. See "Locking 13 control keys" on page 37 for details. When the On-Screen Display (OSD) menu is activated, the #3,
ملخص المحتوى في الصفحة رقم 12
Approx. 15° Remote control effective range Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-re
ملخص المحتوى في الصفحة رقم 13
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the
ملخص المحتوى في الصفحة رقم 14
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. 4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect width. This will result in a proportionally smaller height equivalent to 75% of the projector's n
ملخص المحتوى في الصفحة رقم 15
How to determine the position of the projector for a given screen size 1. Select your screen size. 2. Refer to the table and find the closest match to your screen size in the left columns labelled "4:3 screen diagonal". Using this value, look across this row to the right to find the corresponding average distance from screen value in the column labelled "Average". This is the projection distance. 3. On that same row, look across to the right column and make note of the "Vertical offset in m
ملخص المحتوى في الصفحة رقم 16
MP513/MP522 projection dimensions Refer to "Dimensions" on page 56 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance 4:3 screen diagonal Recommended projection distance from Vertical offset in mm screen in mm Feet Inches mm Min length Average Max length (with max. (with min. zoom) zoom) 4 48 1219 1846 1938 2031 73 59 1500 2271 2385 2498 90 5 60 1524 2308 2423 2538
ملخص المحتوى في الصفحة رقم 17
MP512 projection dimensions Refer to "Dimensions" on page 56 for the center of lens dimensions of this projector before calculating the appropriate position. 4:3 screen diagonal Screen Center of lens Vertical offset Projection distance 4:3 screen diagonal Recommended projection distance from Vertical offset in mm screen in mm Feet Inches mm Average 4 48 1219 1920 73 59 1500 2362 90 5 60 1524 2400 91 6 72 1829 2880 110 79 2000 3150 120 7 84 2134 3360 128 8 96 2438 3840 146 98 2500 3937 150 9 108
ملخص المحتوى في الصفحة رقم 18
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. Connecting a computer or monitor Connecting a computer The projector provides a VGA input socket th
ملخص المحتوى في الصفحة رقم 19
Connecting a monitor If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the D-SUB OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 18. 2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the vi
ملخص المحتوى في الصفحة رقم 20
Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • Component Video •S-Video •Video (composite) You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source d
