ملخص المحتوى في الصفحة رقم 1
Multimedia Projector
PLC-SW10
MODEL
Owner's Manual
ملخص المحتوى في الصفحة رقم 2
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual
ملخص المحتوى في الصفحة رقم 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
ملخص المحتوى في الصفحة رقم 4
COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter
ملخص المحتوى في الصفحة رقم 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER MODE 22 SELECTING COMPUTER MODE 22 SELECTING COMPUTER SYSTEM 22 PREPARATION 7 COMPATIBLE COMPUTER SPECIFICATIONS 23 PC ADJUSTMENT 24 NAME OF EACH PART OF THE PROJECTOR 7 PICTURE IMAGE ADJUSTMENT 26 ADJUST PICTURE IMAGE MANUALLY 26 SETTING-UP THE PROJECTOR 8 NORMAL FUNCTION 26 CONNECTING THE AC POWER CORD 8 AUTO IMAGE FUNCTION 27 POSITIONING THE PROJECTOR 9 ADJUSTABLE FEET 9 PICTURE POSITION ADJUSTMENT 27 MOVING THE PROJECTOR 10 PICTURE SCREEN ADJU
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
PREPARATION NAME OF EACH PART OF THE PROJECTOR FRONT OF THE CABINET AIR INTAKE VENTS PROJECTION LENS (Both sides and Rear) This projector is equipped with cooling fans for protection from overheating. ZOOM RING Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction. Do not cover the vent slot. Keep sides and rear clear of any FOCUS RING obstructions. Obstructions may block cooling air. SPEAKER (Monaural) LENS COVER POWER CORD CONNECTOR
ملخص المحتوى في الصفحة رقم 8
PREPARATION SETTING-UP THE PROJECTOR CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. C
ملخص المحتوى في الصفحة رقم 9
PREPARATION POSITIONING THE PROJECTOR This projector is designed to project on a flat ROOM LIGHT projection surface. The brightness in the room has a great The projector can be focused from 4.6’(1.4m) ~ influence on the picture quality. It is 26.3’(8.0m). recommended to limit ambient lighting in Refer to the figure below to adjust the screen size. order to provide the best image. 26.3’ (8.0m) 200” 19.7’ (6.0m) 13.1’ (4.0m) 150” Max. Zoom 7.8’ (2.4m) 167” 100” H1 4.6’ (1.4m) 125” 60” 83” M
ملخص المحتوى في الصفحة رقم 10
PREPARATION MOVING THE PROJECTOR When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and cabinet. When this projector is not in use for an extended period, put it into the case (carrying bag) supplied with this projector. CAUTION The Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of the cabinet, and it is not designed to protect the LCD projector from external forces. Do not transport the projector thr
ملخص المحتوى في الصفحة رقم 11
CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR VIDEO INPUT JACKS S-VIDEO INPUT JACK (VIDEO/Y, Pb/Cb, Pr/Cr) Connect the S-VIDEO output Connect the composite video VIDEO S – VIDEO from the video equipment to this output from the video equipment Y – Pb/Cb – Pr/Cr terminal. (Refer to P12.) to the VIDEO/Y jack or connect the component video outputs to the Y/VIDEO, Pb/Cb and Pr/Cr jacks. (Refer to P12.) AUDIO INPUT JACK AUDIO OUT AV RESET COMPUTER RESET BUTTON Connect the audio output
ملخص المحتوى في الصفحة رقم 12
CONNECTING THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT Cables used for connection (✽ = Cables are not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2- Mini Plug x 1 (stereo) or Mini Plug (stereo)) ✽ Video Source (example) Component video output equipment. (such as DVD player or Video Cassette Recorder Video Disc Player high-definition TV source.) Composite Component S-VIDEO Output Audio Output Video Output Video Output Y Pb/Cb Pr/
ملخص المحتوى في الصفحة رقم 13
CONNECTING THE PROJECTOR CONNECTING TO THE COMPUTER Cables used for connection (✽ = Cables are not supplied with this projector.) • VGA CABLE (HDB 15 pin) NOTE : • CONTROL CABLE FOR PS/2 PORT When connecting the cable, the power cords of • CONTROL CABLE FOR SERIAL PORT, or ADB PORT ✽ both the projector and the external equipment • MAC ADAPTER (When connecting to Macintosh computer) ✽ should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the • AUDIO CABLE
ملخص المحتوى في الصفحة رقم 14
LOCK ON ALL OFF BEFORE OPERATION OPERATION OF THE REMOTE CONTROL Left Side POWER ON-OFF BUTTON ON-OFF Used to turn the projector on or off. (P19) KEYSTONE D.ZOOM VOLUME COMPUTER BUTTON Used to select COMPUTER input source. (P22) MUTE COMPUTER VIDEO BUTTON MENU BUTTON MENU VIDEO Used to select VIDEO Used to select MENU source. (P29) operation. (P17, 18) RIGHT CLICK BUTTON Used to compress the image in DIGITAL ZOOM mode. SELECT BUTTON (P28) Used to execute the item ALL-OFF SWITCH It is also us
ملخص المحتوى في الصفحة رقم 15
ملخص المحتوى في الصفحة رقم 16
BEFORE OPERATION TOP CONTROLS AND INDICATORS MENU BUTTON POINT BUTTONS WARNING TEMP. INDICATOR READY INDICATOR Used to open or close Used to select an item or This indicator flashes red This indicator lights the MENU operation. adjust the value in the MENU. when internal projector green when the projector (P17, 18) It is also used to pan the temperature is too high. is ready to be turned on. image in DIGITAL ZOOM (P35) And it flashes green in mode. (P28) Power Management POWER ON–OFF BUTTON mode
ملخص المحتوى في الصفحة رقم 17
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON- WIRELESS REMOTE CONTROL SCREEN MENU. Refer to the following pages to POINT BUTTON Used to move the operate each adjustment in the ON-SCREEN MENU. Pointer UP/ DOWN/ RIGHT/ LEFT. 1 MOVING THE POINTER Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL or the REMOTE CONTROL. SELECT BUTTON Used to select the item. 2 SELECT THE ITEM TOP
ملخص المحتوى في الصفحة رقم 18
BEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode. MODE MENU AUTO IMAGE MENU PC ADJUST MENU SETTING MENU LANGUAGE MENU Used to select Used to adjust Fine Used to adjust the Used to adjust Volume, Used to select the Computer sync, Total dots, parameters to set the Display Menu and the language input mode. and Picture Position match with the input reset Lamp Replacement used in the (Refer to P22) automatically. signal format. Monitor Timer. Menu. (Refer
ملخص المحتوى في الصفحة رقم 19
BASIC OPERATION TURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTOR Complete the peripheral connections (with Computer, VCR, etc.) 1 before turning on the projector. (Refer to "CONNECTING TO THE PROJECTOR" on Pages 11~13 for connecting that equipment.) Connect the projector's AC Power Cord into a wall outlet. The 2 30 LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or 3 on the Top Control to ON. The LAMP indicator
ملخص المحتوى في الصفحة رقم 20
BASIC OPERATION ADJUSTING THE IMAGE ZOOM ADJUSTMENT Turn the ZOOM RING to adjust the projected picture size. Turn the ring to “WIDE” direction to make the image larger, and turn MIN. to “TELE” direction to make the image smaller. MAX. ZOOM RING FOCUS ADJUSTMENT Turn the FOCUS RING to adjust the projected picture focus. FOCUS RING KEYSTONE ADJUSTMENT If the picture has keystone distortion, correct image with KEYSTONE adjustment. Press the KEYSTONE / button on the Remote Control Unit 1 Keys
