ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support 24/7 Technical Support — i —
ملخص المحتوى في الصفحة رقم 3
User’s Manual Copyright This publication, including all photographs, illustrations and software, is protected under international copy- right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2008 Disclaimer The information in this document is subject to change without notice. The manufacturer makes no repre- sentations or warranties with respect to the contents hereof and spe
ملخص المحتوى في الصفحة رقم 4
Preface Important Safety Information ® Congratulations on purchasing the Planar DLP projector! Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The following styles are used in this manu
ملخص المحتوى في الصفحة رقم 5
® DLP Projector – User’s Manual Power Safety Only use the supplied power cord. Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 35 for clear and safe instructions for this procedure. Before replacing the lamp: U
ملخص المحتوى في الصفحة رقم 6
Preface Main Features • Lightweight unit, easy to pack away and transport. • Compatible with all major video standards including NTSC, PAL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms. • Supports resolutions up to SXGA at 16.7 million colors to deliver crisp, clear images. • Flexible setup allows for front, rear projections. • Line-of-vision projections remain square, with advanced keystone correction for angled projections. • Input source
ملخص المحتوى في الصفحة رقم 7
® DLP Projector – User’s Manual Table of Contents GETTING STARTED........................................................................................................................................................... 1 PACKING CHECKLIST........................................................................................................................................................... 1 VIEWS OF PROJECTOR PARTS..........................................................................
ملخص المحتوى في الصفحة رقم 8
Preface Check the audio cable connection................................................................................................................................. 43 HAVING THE PROJECTOR SERVICED .................................................................................................................................. 43 SPECIFICATIONS..................................................................................................................................................
ملخص المحتوى في الصفحة رقم 9
Getting Started Packing Checklist Carefully unpack the projector and check that the following items are included: PR6022 DLP projector Remote control (with one 3V CR2025 battery) RGB cable Power cord RGB to Component Adapter (Optional) Quick Start Guide CD-ROM Carrying case (This User’s manual) Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material sho
ملخص المحتوى في الصفحة رقم 10
® DLP Projector – User’s Manual Views of Projector Parts Front-right View Item Label Description See page: Ventilation opening To keep the projector lamp cool 1. Height-adjuster button Push to release height adjuster 2. 15 Height adjuster Adjusts level of projector 3. Lens cap Covers lens to protect when not in use 4. IR receiver Receiver for IR signal from remote control 5. 6 Lens Remove lens cap before use 6. Focus ring Focuses the projected image 7. 16 Zoom ring
ملخص المحتوى في الصفحة رقم 11
® DLP Projector – User’s Manual Top view—On-screen Display (OSD) buttons and LEDs Item Label Description See page: Turns the projector On or Off 11 1. (Power) ▲ (Up cursor) Navigates and changes settings in the OSD 2. 18 Green Power On Power LED Off Power Off (AC Off) 3. Flashing Error code On System over temperature 4. Over Temp LED Off Normal State Orange Lamp is ready to be powered-on. Ready LED 5. Lamp not ready (Warm-up/shutting down/cooling) Flashing (see LE
ملخص المحتوى في الصفحة رقم 12
® DLP Projector – User’s Manual Rear view Item Label Description See page: 1. AC IN Connect the power cable 11 Connect the USB cable from a computer 2. USB (Service Only) (service only) Connect the AUDIO CABLE from the input device AUDIO 3. Connect the S-VIDEO CABLE from a video device S-VIDEO 10 4. Connect the VIDEO CABLE from a video device VIDEO 5. Connect the RGB CABLE from a computer and VGA 6. components Secure to permanent object with a Kensington® 7. (
ملخص المحتوى في الصفحة رقم 13
® DLP Projector – User’s Manual Bottom view Item Label Description See page: Lamp cover Remove when changing the lamp. 35 1. Adjuster drops down when adjuster button is Height adjustor 2. 15 pushed. Lens cap hook To fasten the lens cap cover. 3. Tilt adjustor Rotate adjuster lever to adjust angle position. 4. 15 Contact your dealer for information on mounting the projector on a 5. Ceiling support holes ceiling Note: When installing, ensure that you use only UL Listed ce
ملخص المحتوى في الصفحة رقم 14
® DLP Projector – User’s Manual Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluores- cent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control and the projector is obstructed, you can bounce the signal off certain reflective sur- faces such as projector screens. 3. The buttons and keys on
ملخص المحتوى في الصفحة رقم 15
® DLP Projector – User’s Manual Item Label Description See page: Up cursor Navigates and changes settings in the OSD 1. 18 2. Enter Changes settings in the OSD Power Turns the projector On or Off 11 3. Right cursor Navigates and changes settings in the OSD 4. 18 5. Volume + Increase volume 17 Volume - Decrease volume 6. Mute Mutes the built-in speaker 7. Freeze Freeze/unfreezes the on-screen picture 8. Source Detects the input device 10 9. Auto Auto adjustment for
ملخص المحتوى في الصفحة رقم 16
® DLP Projector – User’s Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15 degrees above or below the projector level. If the projector does not respond to the remote control, move a little
ملخص المحتوى في الصفحة رقم 17
Setup and Operation Inserting the Remote Control Batteries Remove the battery compartment 1. cover by sliding the cover in the di- rection of the arrow (A). Pull out the cover (B). Insert the battery with the positive 2. side facing up. Replace the cover. 3. Caution: 1. Only use a 3V lithium battery (CR2025). 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the battery when not using the projector for prolonged periods. – 9
ملخص المحتوى في الصفحة رقم 18
® DLP Projector – User’s Manual Connecting Input Devices A PC or notebook computer and video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output connector. Item Label Description USB (Service Only) Connect the USB cable from a computer (service only). A Connect the audio cable from the c
ملخص المحتوى في الصفحة رقم 19
® DLP Projector – User’s Manual Starting and Shutting down the Projector Connect the power cord to the 1. projector. Connect the other end to a wall outlet. The Power and Ready LEDs on the projector light. Turn on the connected devices. 2. Ensure the Ready LED displays a 3. solid orange and not a flashing or- ange. Then press the Power button to turn on the projector. The projector splash screen displays and connected devices are de- tected. See Setting an Access Pass
ملخص المحتوى في الصفحة رقم 20
® DLP Projector – User’s Manual When the “Power Off? /Press 5. Power again” message appears, press the Power button. The projec- tor turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the Ready LED stops flashing–indicating the projector has cooled down. – 12 –
