ملخص المحتوى في الصفحة رقم 1
CONTENTS
Usage Notice .....................................................................................2
Safety Instructions ................................................................................................................. 2
Introduction .......................................................................................5
Projector Features ................................................................................................................. 5
Package Contents .
ملخص المحتوى في الصفحة رقم 2
Usage Notice Safety Instructions Read all of these instructions before you operate your projector and save for future reference. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Notes and warnings All notes and warnings in the operating instructions should be adhered to. 3. Cleaning Unplug the projector from the wall socket before cleaning. Use a damp cloth for cleaning the projector housing. Do not use liquid or aerosol clean
ملخص المحتوى في الصفحة رقم 3
8. Replacement parts When replacement parts are required, be sure that the replacement parts are specified by the manufacture. Unauthorized substitutions may result in fire, electric shock or other hazards. 9. Moisture Condensation Never operate this projector immediately after moving it from a cold location to a warm one. When the projector is exposed to such a change in temperature, moisture may condense on the lens and the crucial internal parts. To prevent the unit from possible damage,
ملخص المحتوى في الصفحة رقم 4
Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recomme
ملخص المحتوى في الصفحة رقم 5
Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: ® Single chip 0.55" Texas Instruments DLP technology (XGA model) ® Single chip 0.65" Texas Instruments DLP technology (WXGA model) XGA (1024 x 768 pixels) WXGA (1280 x 800 pixels) ® Compatibility with Macintosh computers Compatibility with NTSC, PAL, SECAM and HDTV D-Sub 15
ملخص المحتوى في الصفحة رقم 6
Package Contents When you unpack the projector, make sure you have all these components: Remote Control (IR) & Projector AC Power Cord batteries (AAA *2 PCS) Remote Control (IR) & VGA Cable (D-SUB Carry Bag (optional batteries (AAA *2 PCS) for to D-SUB) for certain models) China Documentation: User's Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) Note For European warrant information please visit www.optomaeurope.com Due to the difference in applications for each cou
ملخص المحتوى في الصفحة رقم 7
Projector Overview Front View 8 7 9 6 4 5 1 2 3 1 Front IR remote control sen- 6 Control panel sor 2 Elevator foot 7 Zoom ring 3 Projection lens 8 Focus ring 4 Speaker 9 Lamp cover 5 Ventilation holes EN-7
ملخص المحتوى في الصفحة رقم 8
Rear View 2 1 3 1 AC power socket 2 Connection ports 3 2 Kensington lock Bottom View 3 1 2 1 Security bar 2 2 Ceiling mount holes 3 Ventilation holes Note This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. EN-8
ملخص المحتوى في الصفحة رقم 9
Using the Product Control Panel 4 6 2 3 5 1 7 8 4 1 Power Turn the projector on or off. 2 SOURCE Switch between input signals. 3 MENU/EXIT Display or exit the on-screen display menus. 4 Keystone ( / ) Manually correct distorted images resulting from an angled projection. 5 Four directional buttons Use four directional buttons to select items or make adjustments to your selection. 6 Re-SYNC Automatically synchronize the projector to the input source. 7 POWER (Power LED indicator) Refer to “LED In
ملخص المحتوى في الصفحة رقم 10
Connection Ports 1 2 3 4 5 6 7 11 10 9 8 1 AUDIO IN Connect an audio output from video equipment or computer to this jack. 2 HDMI Connect HDMI output from video equipment to this jack. 3 S-VIDEO Connect S-Video output from video equipment to this jack. 4 VGA1-IN/YPbPr/ Connect image input signal (analog RGB or component) to this jack. Support wireless dongle via internal power of VGA 1. 5 RS-232 When operating the projector via a computer, connect this to the controlling computer's RS-232C p
ملخص المحتوى في الصفحة رقم 11
Remote Control 1 Power Turn the projector on or off. Four directional buttons 2 Use four directional buttons to select items or make adjust- ments to your selection. 1 "UP" key: When menu is off, up 2 key for emulation of USB 12 2 mouse. 2 2 "Left" key: When menu is off, 13 3 left key for emulation of USB 14 4 mouse. 15 5 "Right" key: When menu is off, 16 6 right key for emulation of USB 17 7 mouse. 8 18 "Down" key: When menu is off, 9 19 down key for emulation of USB 10 20 mouse. 11 21
ملخص المحتوى في الصفحة رقم 12
15 Re-SYNC Using the remote mouse Automatically synchronize the control projector to the input source. The capability of operating your When menu is on, right key for computer with the remote control OSD. gives you more flexibility when 16 Volume+/- delivering presentations. Adjust the volume level. 1. Connect the projector to your PC or 17 Page - notebook with a USB cable prior to Perform page down function. using the remote control in place of When menu is on, down key for your computer
ملخص المحتوى في الصفحة رقم 13
Installing the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the compartment. 3. Close the battery cover into position. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Make sure the plus and minus terminals are correctly aligned when loading a battery. Note Keep the batteries out of the reach of children. There is a danger of death by accid
ملخص المحتوى في الصفحة رقم 14
Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Note The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a position where the remote sensor is visible. Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do
ملخص المحتوى في الصفحة رقم 15
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. 6 7 1 6 8 3 4 1 2 1 5 1. ............................................................................................*Audio cable 2. ............................................................................................*HDMI cable 3. ......................................
ملخص المحتوى في الصفحة رقم 16
Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them ® ® to both IBM compatibles and Macintosh computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: 1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer. 2. Connect the other end of the VGA cable to the VGA1-IN/YPbPr or VGA2-IN/YPb
ملخص المحتوى في الصفحة رقم 17
Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: HDMI Component Video S-Video Video (composite) You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the avail- ability of matching terminals on both the projector and the Video sourc
ملخص المحتوى في الصفحة رقم 18
Connecting an HDMI source device Examine your Video source device to determine if it has a set of unused HDMI output jacks available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an HDMI source device: 1. Take an HDMI cable and connect one end to the HDMI output jack of the HDMI source device. 2. Connect the other end of the HDMI cable to the HDMI jack on the projector. Connectin
ملخص المحتوى في الصفحة رقم 19
Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an S-Video source device: 1. Take an S-Video cable and connect one end to the S-Video output socket of the Video source device. 2. Connect the other end of the S-Video cable to the S-VIDEO socket on the
ملخص المحتوى في الصفحة رقم 20
Connecting a composite Video source device Examine your Video source device to determine if it has a set of unused composite Video output sockets available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a composite Video source device: 1. Take a Video cable and connect one end to the composite Video output socket of the Video source device. 2. Connect the other end of the Video cab
