InFocus SP-CEIL-001 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

SP-CEIL-001

NOTE: If the (Optional) SP-LTMT-EXT Adjustable height
suspension adapter is a part of the installation, securely install
Projector Mount

the ceiling adapter to the ceiling at this time.
INSTALLATION INSTRUCTIONS
Step 3

Install the two (2) conical spacers (K) and two (2) flat washers (J) two

(Refer to its Installation Instructions) (2) hinge pin screws (I) loosely on both sides of the base box (L). Raise
Step 1
the projector with the mounting bracket atta

ملخص المحتوى في الصفحة رقم 2

Step 5 Install the two (2) conical spacers (K) and two (2) flat washers (J) two (2) hinge pin screws (I) loosely on both sides of the base box (L). Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the base box. Install the two (2) angle locking screws (H) adjust the angle, lock it, and then tighten the hinge pin screws (I). See Figure 3 The ceiling should be capable of supporting a weight of