InFocus C300HB دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ASK Proxima C300 and C300HB (DP8000 and DP8000HB) Projectors
Frequently Asked Questions: Video
The colors on the video image are incorrect.
Do the following after attempting to adjust the color in the Picture menu. You can access the picture menu by pressing the
Menu button and navigating to Basic > Setup > Picture.
1. Reset the projector to the factory default settings. Press the Menu button. Then navigate to Basic > Setup > Service.
Select Factory Reset. Note that if you have created sp

ملخص المحتوى في الصفحة رقم 2

Keypad Press the Keystone Up arrow to reduce the upper part of the image, and press the Keystone Down arrow to reduce the lower part. You can adjust keystone between -15 to +40 degrees. Menu Press the Menu button. Navigate to Basic > Keystone and press Select (keypad) or L button (remote). Use the Left and Right Arrow buttons or trackball to adjust the value. Press the Select or L button to confirm your change.Finally, change the Keystone setting. For most models, you can use the Keystone

ملخص المحتوى في الصفحة رقم 3

No video image is projected. LED status has changed. What's wrong? This projector has a status and alarm LED adjacent to the keypad. The LED shines green, red or orange, depending on the state of the projector. The LEDs can help you troubleshoot projector problems. Your User Guide contains a chart to determine LED status and behavior. I'm playing a DVD from my laptop, but the projector is just displaying a blank screen. If the DVD plays satisfactorily on your laptop, you should be able watc

ملخص المحتوى في الصفحة رقم 4

6. Upgrade the projector's system software. Browse to the C300 Software webpage to download the software and upgrade instructions. If the projector still will not display the image, it is likely that there is an internal problem that requires repair. Take the projector to your dealer or contact ASK Proxima Technical Support. The video image is 'torn', distorted, noisy, or shifted. The edges of the image may be distorted. 1. Make sure that the cables are securely connected, and that the vid