ملخص المحتوى في الصفحة رقم 1
VISUAL PRESENTER
HV-100XG
INSTRUCTION MANUAL
Please read this instruction manual carefully before using this Visual Presenter and
keep it for future reference.
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFEGUARDS recommended by the Read Instructions – All the manufacturer, or sold with the safety and operating instructions product. Any mounting of the should be read before the product should follow the appliance is operated. manufacturer's instructions, and Retain Instructions – The should use a mounting accessory safety and operating instructions recommended by the should be retained for future manufacturer. reference. Ventilation – Slots and Heed Warnings – All warnings openings in
ملخص المحتوى في الصفحة رقم 3
Grounding or Polarization – Overloading – Do not overload This product may be equipped wall outlets, extension cords, or with either a polarized 2-wire AC integral convenience receptacles line plug (a plug having one as this can result in a risk of fire blade wider than the other) or a or electric shock. 3-wire grounding type plug, a A product and cart plug having a third (grounding) combination should be moved pin. The 2-wire polarized plug with care. will fit into the power outlet only Quick s
ملخص المحتوى في الصفحة رقم 4
Damage Requiring Service – Safety Check – Upon completion of any service or Unplug this product from the wall repairs to this product, ask the outlet and refer servicing to service technician to perform qualified service personnel under safety checks to determine that the following conditions: the product is in proper operating When the power-supply cord or condition. plug is damaged. If liquid has been spilled, or Heat – The product should be situated away from heat sources objects have fallen
ملخص المحتوى في الصفحة رقم 5
The lightning flash with INFORMATION arrowhead symbol, within an equilateral triangle, is This equipment has been intended to alert the user to tested and found to comply with the presence of uninsulated the limits for a Class A digital SA 1965 "dangerous voltage" within the device, pursuant to Part 15 of product's enclosure that may be of sufficient magnitude to the FCC Rules. These limits are constitute a risk of electric designed to provide reasonable shock to persons. protection against harm
ملخص المحتوى في الصفحة رقم 6
BEFORE YOU USE Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location. Use the Presenter in the following environmental conditions: Temperature: 0°C~40°C (32°F~104°F) Humidity: 30%~85% (No condensation) Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such as thinner or
ملخص المحتوى في الصفحة رقم 7
CONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 BEFORE YOU USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2. SETTING UP AND STORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2-1 SETTING UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2-2 STORING
ملخص المحتوى في الصفحة رقم 8
1. PART NAMES AND FUNCTIONS Lamp Switch [LAMP] 7 8 Image Input Selection Switch [INPUT] Power Switch [POWER] 9 10 Power Terminal [DC IN 12V] Anti-theft key-hole 2 Arm Camera Head 1 Main Stage 4 3 Base Unit Lamp 6 AC Adapter 13 Auxiliary Stage 5 12 Analog RGB Cable Accessory Case 11 - 7 -
ملخص المحتوى في الصفحة رقم 9
No. Function Name 1 Camera Head Moving up/down the camera head can change the size of an object in display on the monitor screen smoothly. 2 A link part for moving the camera head horizontally. Arm 3 Base Unit A base part of the Presenter. 4 Main Stage A stage for placing an object thereon. Use this stage, if necessary, according to the object 5 Auxiliary Stage size. 6 Lamp To be used when the image is dark. 7 Lamp ON/OFF switch. Lamp Switch [LAMP] 8 Image Input Selection To switch the image out
ملخص المحتوى في الصفحة رقم 10
Zoom Lamp 15 14 Digital Zoom Button [DIGITAL ZOOM] 16 Gain Button [GAIN] Auto White Balance Switch [AWB] 17 -Normally ON Auto Electronic Shutter Switch [AES] 18 -Normally ON Gamma Value Selection Switch [ ] 19 -[NORM.] is standard. RGB-in Terminal [RGB INPUT] 20 RGB-out Terminal [RGB OUTPUT] 21 - 9 -
ملخص المحتوى في الصفحة رقم 11
No. Function Name 14 Digital Zoom Button To operate digital zoom. Use the Digital zoom after moving the camera head to the lowest horizontal [DIGITAL ZOOM] position (the minimum shooting area), and the image is expanded even more. The zoom button [TELE]/[WIDE] can change the size of an object in display on the monitor screen. Pressing [TELE] and [WIDE] buttons together resets the digital zoom to the initial state (non-action). Note: - The digital zoom will degrade the image quality. - Turning ON
ملخص المحتوى في الصفحة رقم 12
2. SETTING UP AND STORING 2-1 SETTING UP Gently release the clipped area (as marked with arrow) of the right and left stages as OPEN OPEN OPEN OPEN S ST TA AG GE E S ST TA AG GE E illustrated. Note:- It may be damaged by un- latching the stages putting hands on other position not shown by arrows. - When the accessory case is housed inside, be careful not to drop it. Connect the RGB-out terminal [RGB Latch parts OUTPUT] of the Presenter to the monitor/ projector with the RGB cable (supplied). Not
ملخص المحتوى في الصفحة رقم 13
2-3 ZOOMING By moving up/down the camera head, the object in display on the monitor screen can be zoomed-in or zoomed-out. And use the Digital zoom after moving the camera head to the lowest horizontal position (minimum shooting area), and the image is expanded even. But the digital zoom will degrade the image quality. In zoom operation by moving up/down the camera head, focus adjustment is not required (FOCUSFREE). Zoom-in Digital zoom Zoom-out Expand more Example of connection (Backside of the
ملخص المحتوى في الصفحة رقم 14
3. TROUBLESHOOTING HINTS Symptom Checkpoint No image is on the monitor or • Is the analog RGB cable connected properly? project. • Is the AC adapter inserted correctly? • Is the DC jack inserted firmly in the power terminal [DC IN 12V] of the Presenter? • Is the power switch [POWER] ON? • Is the image-in selection switch [INPUT] set at [RGB IN]? Image with digital zoom is • The digital zoom feature normally will degrade the blurry. image quality somewhat. • Is the illumination sufficient? If no
ملخص المحتوى في الصفحة رقم 15
4. SPECIFICATIONS General Power voltage 12VDC Power consumption 9VA Outside dimensions 361mm(W)x282mm(D)x161-284mm(H) (14.2in.(W)x11.1in.(D)x6.3-11.2in.(H)) 59mm(W)x282mm(D)x161mm(H) (2.3in.(W)x11.1in.(D)x6.3in.(H)) Mass 1.5kg (3.3lbs) Optical Lens F: 2.9, f= 3mm Shooting area 364mmx271mm (14.3in.x10.7in.) 179mmx135mm (7.1in.x5.3in.) Camera Image pick-up element Progressive square picture element 1/3"size CCD Image pick-up speed 20 frames/sec Total picture eleme
ملخص المحتوى في الصفحة رقم 16
WARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., LTD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMPANIES U.S.A. ELMO Mfg. Corp. 1478 Old Country Road, Plainview, NY 11803-5034 Tel:(516)501-1400 Fax:(516)501-0429 E-mail:elmo@elmousa.com web:http://www.elmousa.com/ Canada ELMO Canada Mfg. Corp. 44 West Drive, Brampton, Ontario L6T 3T6
