ملخص المحتوى في الصفحة رقم 1
Pj-to NetDirector
Model No. PjNET-20
Chapter 1 Preparation
Chapter 2 Installation
Chapter 3 Basic Setting & Operation
Chapter 4 Controlling the Projector
Chapter 5 Network Capture & Viewer
Chapter 6 Controlling the Multi-Projectors
Chapter 7 Use of Serial Port
Chapter 8 Appendix
This Pj-to NetDirector is an optional network product
for the projector. Mount this product to the projector
and connect a network cable. It enables a projector to
display the image data stored in the file server and the
ملخص المحتوى في الصفحة رقم 2
Compliances Federal Communication Commission Notice This equipment has been tested and found to comply EIKI PjNET-20 with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed Tested To Comply With FCC Standards to provide reasonable protection against harmful interference in a residential installation. This equip- FOR HOME OR OFFICE USE ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
ملخص المحتوى في الصفحة رقم 3
Contents Chapter 1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Flow of installation .
ملخص المحتوى في الصفحة رقم 4
Contents Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 How to set the Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Check the Timer events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Cancel the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 5
Chapter 1 1 Preparation Network Unit 5 OWNER’S MANUAL ENGLISH
ملخص المحتوى في الصفحة رقم 6
Chapter 1 Preparation Features Network Capture function It enables a projector to project the screen image of the computer on the screen via the network by using an exclusive utility software . PC1 PC2 Capture PJ2 PJ1 Internet PC3 PC4 Intranet PC5 Project a screen image of PC1 with PJ2. Network Viewer function The projector receives the image data stored in the file severs in the network and dis- plays images automatically. PC1 PC2 JPEG PJ2 PJ1 Internet PC3 PC4 Intranet PC5 Project JPEG image
ملخص المحتوى في الصفحة رقم 7
Features Web Management function With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer. PC1 PC2 Turn on PJ2. PJ2 PJ1 Internet PC3 PC4 Intranet PC5 E-Mail Alert function The projector (Network Unit) sends messages to the registered e-mail addresses when a lamp abnormality or power failure occurs with the projector. This message describes ho
ملخص المحتوى في الصفحة رقم 8
Chapter 1 Preparation Multi-control function A single computer can control and set up the multiple computers at the same time. PJ4 PJ3 PJ2 PJ1 Internet PC3 PC4 Intranet PC5 Select Input2 for PJ1 to PJ4 Automatic On/Off using Clock function Automatically turn on or off the projectors at specified date/day and time by using the clock function. I am ready to turn ON, and select Input 3 (Video) Now it's 11:30 Control port ready for external equipment via network This product provides a serial port (
ملخص المحتوى في الصفحة رقم 9
Operating Environment Operating Environment To perform the managing and setting of the projector by using this product, the envi- ronment described below is required. Network Network must handle Ethernet correctly and accept TCP/IP and FTP protocol. Operating System Windows 98 / Windows 2000 / Windows Me / Windows NT4.0 SP6 / Windows XP Computer system requirements ● Computer with 900 MHz or higher processor clock speed recommended; * Intel Pentium/Celeron family or compatible processor recomme
ملخص المحتوى في الصفحة رقم 10
Chapter 1 Preparation *1 The limitation of connection between this product and Hub or Computer Suitable LAN cables are limited by length and type as follows; Connection Type of usable LAN cable Maximum length 2 Network Unit - Hub UTP Straight Cable with category 3 or 5 * 100m 2 Network Unit - Computer UTP Cross Cable with category 3 or 5* 100m *1 There may be other limitations depending on your network environment or LAN specifica- tion. Please consult your network administrator for further deta
ملخص المحتوى في الصفحة رقم 11
Expression Expression/Abbreviation The word “projector” found in this manual means “projector provided with Network Unit” unless otherwise noted. The OS of the computer and the Web browser described in this manual is Windows XP Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruction procedures may differ from the actual operation depending on your computer environment. Use of this manual This manual does not provide the description of basic operation and fu
ملخص المحتوى في الصفحة رقم 12
Chapter 1 Preparation 12
ملخص المحتوى في الصفحة رقم 13
Chapter 2 2 Installation Network Unit 13 OWNER’S MANUAL ENGLISH
ملخص المحتوى في الصفحة رقم 14
Chapter 2 Installation Flow of installation The following are instructions for attaching this product to the projector and connect- ing it to the network. Please review the entire procedure to become familiar with it. Function of the Network Unit (☞ p.15) 1 Explains the name and functions of each part of the network unit. Installation and network configuration (☞ p.16-21) 2 1 Mount this product onto the projector. 2 Connect the LAN cable and join it to the network. 3 Configure the network of the
ملخص المحتوى في الصفحة رقم 15
Name and function of each part z Name and function of each part Power indicator This lights up red when the net- work function is set ON in the projector menu. Serial port This is used when controlling the external equipment via the network. (☞ p.85) LAN port Connecting the LAN cable. Mounting (☞ p.17) screws Mount by using a coin etc. (☞ p.16) LINK indicator (Orange) Connector This lights up orange when the plug Network Unit is connected to the Connecting to the network correctly. terminal on t
ملخص المحتوى في الصفحة رقم 16
Chapter 2 Installation x Installation and Network configuration Mounting 1 Disconnect the AC plug from the projector. Connector cover 2 Remove the connector cover and screw covers from the pro- jector and insert plug on this product to the option connector. Screw cover 3 Tighten two screws by using a coin etc. ! Caution ✐ The AC cord must be disconnected when mounting or removing this product otherwise it may damage the product. ✐ Do not connect the AC cord until after connecting the LAN cable a
ملخص المحتوى في الصفحة رقم 17
Connection of LAN cable Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) strait cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distribute the network cable if required. 1 Disconnect the AC plug from the projec- tor. 2 Connect the UTP strait cable to the LAN port on the Network Unit. 3 Connect the UTP str
ملخص المحتوى في الصفحة رقم 18
Chapter 2 Installation Network configuration Confirmation of the network menu When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item “Mounting” (☞ p.16). Configure the network When you connect the projector to the network, the network number of projector must be the same as the network you intend to connect. You should configure pro- jecto
ملخص المحتوى في الصفحة رقم 19
Network configuration 2 Configuration for IP Address/ Sub net/ Gateway*/DNS* Press SELECT button again, the following network setting menu appears on the screen. Enter the specified network address. How to enter the numbers There are 2 ways to enter the num- bers, one is by using the point buttons (d e 7 8) on the remote control unit or on the projector, the other is by using the screen 10-key pallet by which the numbers can be entered directory. For further information see next page. 3 Restart
ملخص المحتوى في الصفحة رقم 20
Chapter 2 Installation Password setting A password can be set to restrict access to the setting pages of the projector using the web browser. The default password is set “0000” as no password. Network setting 1 Use the projector’s menu and select the Network setting icon on the menu. 2 Select the Network setting sub icon from the submenu, and then press SELECT button once. Check that the mode is “On”. 3 Select the Password sub icon and then press SELECT button once. *The setting window appears.
