Ask Proxima DP6100 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ASK Proxima C90 and C100 (DP6100 – DP6150) Projectors
Frequently Asked Questions: Computer
The image will not focus but I can make it larger or smaller.
Make sure that you are turning the focus ring. The zoom ring is larger and more prominent, but the focus ring is on the
outside, at the front of the lens.
What resolutions is this projector capable of displaying?
VGA, SVGA, XGA, SXGA.
640x480, 720x400, 800x600, 832x624, 1024x768, 1152x864, 1152x870, 1280x1024.
The projected image rever

ملخص المحتوى في الصفحة رقم 2

The projector does not display the computer image. 1. Press the Computer button on the projector keypad, or the Source button on the remote control to select the active computer source. You may need to press the button several times. 2. Make sure the VGA cable is tightly connected to either of the blue VGA Computer ports on the projector. Or ensure that the DVI cable tightly connected to the DVI connector. Check the connections to the computer. Make sure the other end of the cable connects

ملخص المحتوى في الصفحة رقم 3

Correcting horizontal keystoning If you place the projector so that the lens is not perpendicular to the screen in the horizontal plane, the image can suffer from horizontal keystoning. If your image looks like the one above, slowly rotate the projector until the image is rectangular. The image on the computer monitor and/or projection screen flickers. Make sure that the refresh rate on your computer is set between 60 Hz and 75 Hz, or Adapter Default. If you are using a laptop, alway

ملخص المحتوى في الصفحة رقم 4

3. Try different cables. It could be a faulty cable. 4. If the color problem persists, check the cables for bent or broken pins. If any pins are damaged, the cable will need to be replaced with an ASK Proxima-approved cable. Please contact ASK Proxima Technical Support for part information. 5. Upgrade the projector system software. Click here for more information about software upgrades. 6. If the projector still will not display the image, it is possible that there is an internal problem