ملخص المحتوى في الصفحة رقم 1
Introduction Connections and Setup Basic Operation Easy to Use Functions Appendix
OPERATION MANUAL
MODEL
XG-C50X
LCD PROJECTOR
ملخص المحتوى في الصفحة رقم 2
IMPORTANT For your assistance in reporting the loss or theft of your Model No.: XG-C50X Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that Serial No.: you have checked the contents of the carton thoroughly against the list of “Supplied accessories” on page 14. The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, C
ملخص المحتوى في الصفحة رقم 3
Introduction Before using the projector, please read this operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. 2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of
ملخص المحتوى في الصفحة رقم 4
WARNING: The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During normal operation, when turning the power off always use the power (OFF) button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE. PRODUCT DISPOSAL This projector u
ملخص المحتوى في الصفحة رقم 5
Introduction Outstanding Features 1. Ultra High Brightness from a Compact Projector • AC 250W Lamp Use AC 250W lamp for excellent color uniformity and ultra high brightness. • Power Save mode function enables lower noise levels, reduced power consumption and longer lamp life. 2. Simple & Easy Operation • User friendly interface with easy to use operation system and connection areas makes setup a breeze. Smooth installation and operation using frequently used buttons, placement of terminals, colo
ملخص المحتوى في الصفحة رقم 6
Contents Adjusting the Picture ........................................ 46 Introduction Adjusting Image Preferences ..................................46 Outstanding Features ......................................... 3 Selecting the Signal Type ....................................... 46 Contents............................................................... 4 Progressive Mode ....................................................47 IMPORTANT SAFEGUARDS ............................... 6 Adjusting Co
ملخص المحتوى في الصفحة رقم 7
Introduction Canceling the Keylock Setting ................................72 Selecting the Transmission Speed (RS-232C) ..................................................... 72 Setting up a Password ...................................... 73 Entering the Password.............................................73 Changing the Password ......................................... 74 If You Forget Your Password ................................... 74 Setting the Anti-Theft.................................
ملخص المحتوى في الصفحة رقم 8
IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic rules for its installation, use and servicing. 1. R
ملخص المحتوى في الصفحة رقم 9
Introduction 18. Damage Requiring Service 19. Replacement Parts Unplug this product from the wall outlet and refer When replacement parts are required, be sure the servicing to qualified service personnel under the service technician has used replacement parts following conditions: specified by the manufacturer or have the same a. When the power-supply cord or plug is damaged. characteristics as the original part. Unauthorized b. If liquid has been spilled, or objects have fallen substitutions m
ملخص المحتوى في الصفحة رقم 10
IMPORTANT SAFEGUARDS Be sure to read the following safeguards when setting up your projector. ■ Be sure that the intake vent and the exhaust vent are Caution concerning the lamp unit not obstructed. ■ Potential hazard of glass particles if ■ If the cooling fan becomes obstructed, a protection cir- lamp ruptures. In case of lamp rupture, cuit will automatically turn off the projector. This does contact your nearest Sharp Authorized not indicate a malfunction. Remove the projector power Projector
ملخص المحتوى في الصفحة رقم 11
Introduction How to Access the PDF Operation Manuals (Windows, Macintosh) PDF operation manuals in several languages are included in the CD-ROM, so that you can work with the projector, even if you do not have this manual. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can install it from the CD-ROM. To install Acrobat Reader from the CD-ROM For Windows: For Macintosh: 1 Insert the CD-ROM in
ملخص المحتوى في الصفحة رقم 12
Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top View) Power (ON/OFF) 34 INPUT button 35 buttons For switching input mode Turn the power on or off. 1, 2, 3 or 4. Power indicator 34 Illuminates red, when the 38 KEYSTONE button projector is in standby. For adjusting Keystone or When the power is turned Digital Shift setting. on, this indicator will AUTO SYNC button 50 illuminate green. For automatically Lamp replace
ملخص المحتوى في الصفحة رقم 13
Introduction Projector (Rear View) USB terminal 25 18 AUDIO INPUT 1, 2 Terminal for terminal connecting a Shared audio input computer using a terminal for INPUT 1 USB cable. and 2. 26 WIRED REMOTE RS-232C terminal 23 control input For controlling terminal projector using a computer. 20 INPUT 3 terminal For connecting AUDIO OUTPUT 22 video equipment. terminal Shared audio AUDIO (L/R) 20 output terminal for INPUT 3, 4 INPUT 1, 2, 3 and 4. terminals Shared audio input INPUT 1 terminal 1
ملخص المحتوى في الصفحة رقم 14
Part Names Remote Control (Front View) KEYSTONE button 38 34 Power (ON/OFF) buttons For adjusting Keystone or Digital For turning the power on or off. Shift setting. MENU button 42 ENTER button 42 For displaying adjustment and For setting items selected or setting screens. adjusted on the menu. 42 Adjustment buttons UNDO button 39 (',",\,|) For undoing an operation or For selecting menu items. returning to the default settings. 57 PinP button For displaying dual pictures. ENLARGE (Enlarge/Red
ملخص المحتوى في الصفحة رقم 15
Introduction Using the Remote Control Available Range of the Remote Control ■ The remote control can be used to control the projector within the ranges shown in the illustration. Note Remote • The signal from the remote control can be reflected off a screen control 30° 45° sensor for easy operation. However, the effective distance of the signal may differ due to the screen material. Remote control When using the remote control: 23' (7 m) 30° signal transmitters • Be sure not to drop, expose to m
ملخص المحتوى في الصفحة رقم 16
Accessories Supplied accessories Remote control RRMCGA029WJSA Two R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) Power cord (1) (2) (3) (4) For U.S., Canada, etc. For Europe, except U.K. For U.K., Hong Kong and For Australia, New (11'10" (3.6m)) (6' (1.8m)) Singapore Zealand and Oceania QACCDA010WJPZ QACCV4002CEZZ (6' (1.8m)) (6' (1.8m)) QACCBA012WJPZ QACCL3022CEZZ Note • Depending on the region, projectors are shipped only one power cord (see above). Use the power cord that corresponds to
ملخص المحتوى في الصفحة رقم 17
Connections and Setup Connections and Setup
ملخص المحتوى في الصفحة رقم 18
Connecting the Projector to Other Devices Before Connecting Note • Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, be sure that it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: A computer us
ملخص المحتوى في الصفحة رقم 19
Connections and Setup Supplied Power code Connecting the Power accessory Cord Plug in the supplied power cord into the AC socket on the rear of the pro- jector. -17
ملخص المحتوى في الصفحة رقم 20
Connecting the Projector to Other Devices Connecting the Projector to a Computer Connecting to a Computer RGB cable Using the RGB Cable Supplied accessories 1 Connect the projector to the Computer audio computer using the supplied cable RGB cable. •Secure the connectors by tightening Notebook computer the thumbscrews. To RGB output terminal To audio output terminal 2 To input audio signal, connect the projector to the computer using the supplied computer audio cable. Note •See page 93 “Computer