Epson POWERLITE 1810P دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

E
R
®
PowerLite 1810p
Quick Setup
Connect the projector
to your notebook
Lo cate the required cables:
1


Power cord VGA computer cable

Connect the computer cable to the blue
2
Computer1 port on the projector.




Before using the projector, make sure you read the safety
instructions in the User´s Guide on your projector CD.
Connect the other end to your notebook’s
3
video-out or monitor port.
Follow these instructions to connect the proj

ملخص المحتوى في الصفحة رقم 2

Quick Setup PowerLite 1810p Using the remote control Troubleshooting If this is your first time using the remote, make sure its batteries 1 are installed as shown (two AAA batteries). If you see a blank screen... If you see a blank screen or the No signal message after turning on your notebook, check the following:  Make sure the Power light on the projector is green and not flashing, and the A/V Mute slide (lens cover) is open. 