Printronix 182043 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Printronix Guide Specification
RFID Label
96 Bit, EPC Class 1
Squiggle Antenna




















Disclaimer
Notwithstanding anything to the contrary in this document, the guidelines, suggestions and other information
included in this document or otherwise provided to the recipient, including the guidelines and suggestions for
developing converted RFID labels, are provided by Printronix on an "as is" basis and without warranty of
any kind whatsoever, express or

ملخص المحتوى في الصفحة رقم 2

Printronix RFID Label Guide Specification 96 Bit, EPC Class 1, Squiggle Antenna 1. Scope 1.1. This document provides guide specifications for developing converted 96 Bit, EPC Class 1, Squiggle Antenna RFID Smart Labels for use with Printronix SmartLine Series of RFID printers. 1.2. Target Applications 1.2.1. Target application is supply chain logistics labeling using paper pressure-sensitive RFID labels. 1.3. Target RFID Printer Models 1.3.1. Printronix SmartLine SL5000 series R

ملخص المحتوى في الصفحة رقم 3

3.4. Perforations Between Labels 3.4.1. For SL5000 models – per user requirements except no perforations for Peel Mode. 3.4.2. For SLPA7000 models – no perforation between labels. 3.5. Roll Configurations 3.5.1. SL5000 models 3.5.1.1. Inside core diameter: 3 inches 3.5.1.2. Outside roll diameter: 8" maximum 3.5.1.3. Label wind direction – label side out with orientation per Figure 1. 3.5.2. SLPA7000 models 3.5.2.1. Inside core diameter: 3 inch core acceptable for label lengths les

ملخص المحتوى في الصفحة رقم 4

3.8.6.1. Labels shall be able to dispense in a print and apply application. 3.9. Packaging and Handling 3.9.1. RFID labels are static sensitive devices and should be package and handled accordingly. 3.9.2. Avoid storing labels in elevated temperature environment. 4. Thermal Transfer Ribbons for Printronix RFID Printers 4.1. Wax resin ribbon for best durability. Wax Resin Blend Ribbon 8500, 4.33" x 2051', package of 6 ribbons, Printronix part no. 203485-103. 4.2. General purpose wax

ملخص المحتوى في الصفحة رقم 5

LEADING EDGE OF LABEL LABEL PERF 0.125" (CENTERED IN GAP) Direction of label travel out of printer Tolerance: Variable 1.40" Max +/- 0.15 2.0" min Target: +/- 0.05 LABEL SQUIGGLE INLAY OUTLINE SQUIGGLE ANTENNA OUTLINE LINER STRAP 1.0" min x 0.125" black timing mark on back side of liner Exposed Liner C/L of Strap 0.0625" max, 0.03125" min See para 3.8.4 1.9375" (+0.0625", -0.0359") 4.00" 4.125" Printronix RFID Squiggle Label Requirements for 4.0" Wide x Variable Length Label Minimum Label