ملخص المحتوى في الصفحة رقم 1
Xerox DocuPrint 96/DocuPrint 96MX
Laser Printing System
Message Guide
April 1998
721P85650
ملخص المحتوى في الصفحة رقم 2
Xerox Corporation 701 S. Aviation Boulevard El Segundo, CA 90245 ©1998 by Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks, etc. Printed in the United States of America. Publication number:
ملخص المحتوى في الصفحة رقم 3
Related publications The Xerox DocuPrint 96/DocuPrint 96MX Laser Printing System Message Guide is part of the eight manual reference set for your laser printing system. The entire reference set is listed in the table below. Several other related documents are also listed for your convenience. For a complete list and description of available Xerox documentation, refer to the Xerox Documentation Catalog (Publication number 610P17417) or call the Xerox Documentation and Software Services (XD
ملخص المحتوى في الصفحة رقم 4
iv XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
ملخص المحتوى في الصفحة رقم 5
Table of Contents Related publications iii Notice iii Introduction vii About the reference set vii DocuPrint 96/DocuPrint 96MX Laser Printing System document set vii What the message guide contains x How the message guide is organized xi The conventions used in this guide xii 1. CP (COMPRESS command) messages 1-1 2. DSR (disk save and restore command) messages 2-1 3. FD (forms compilation) messages 3-1 4. HIP (host interface processor) messages 4-1 5. IFU (Interpress font utility) messages 5-1 6
ملخص المحتوى في الصفحة رقم 6
TABLE OF CONTENTS 13. System verification error messages 13-1 14. Summary sheet error messages 14-1 Appearance error message 14-2 Appearance warning messages 14-5 Fatal error messages 14-9 Informational messages 14-13 Master error messages 14-16 Master warning messages 14-22 System problem messages 14-23 15. DocuPrint 96/DocuPrint 96MX LPS additional messages 15-1 Numbered DocuPrint 96/DocuPrint 96MX LPS messages 15-3 A. Xerox support services A-1 Xerox Customer Support Center A-1 Xerox Customer
ملخص المحتوى في الصفحة رقم 7
Introduction The Xerox DocuPrint 96/DocuPrint 96MX Laser Printing Systems Message Guide is one of the eight manuals which make up your DocuPrint 96/DocuPrint 96MX Laser Printing System (LPS) Reference Set. The LPS Message Guide provides an easy to use reference tool for quickly determining why messages appear on your system controller display or printed summary sheet, and the appropriate action(s), if any, to take. This message guide does not contain detailed explanations of tasks. Throug
ملخص المحتوى في الصفحة رقم 8
INTRODUCTION Xerox DocuPrint 96/DocuPrint 96MX This reference contains the following information: LPS PDL Reference • Print Description Language components and processes • Input processing functions • Output processing functions • PDL command summary • Page formatting guidelines • Character code assignment tables • PDL programming information with step-by-step instructions Xerox DocuPrint 96/DocuPrint 96MX This reference contains the following information: LPS System Generation Guide • Configura
ملخص المحتوى في الصفحة رقم 9
INTRODUCTION Xerox DocuPrint 96/DocuPrint 96MX This reference contains the following information: LPS Installation Planning Guide • LPS basic components and options • Tasks that must be accomplished before installation • Preinstallation requirements • Installation process • Postinstallation activities Xerox LPS Tape Formats Manual This reference contains the following information: • Characteristics of different formats • File organization • Data formats • Carriage control conventions Xerox LPS S
ملخص المحتوى في الصفحة رقم 10
INTRODUCTION What the message guide contains The Xerox DocuPrint 96/DocuPrint 96MX LPS Message Guide is divided into the following chapters: Chapter 1: CP (COMPRESS command) messages Chapter 2: DSR (disk save and restore command) messages Chapter 3: FD (forms compilation) messages Chapter 4: HIP (host interface processor) messages Chapter 5: IFU (Interpress font utility) messages Chapter 6: OSS (operating system) messages Chapter 7: PDL (job source library compilation) messages Chapter 8: PG (P
ملخص المحتوى في الصفحة رقم 11
INTRODUCTION • An order card for the Customer Documentation Catalog, which describes other available Xerox documentation • A Reader Comment Form. Please take a few minutes to write your comments about the message guide, and any suggestions you may have for improving it, on the Reader Comment Form • Chapters 1 through 14 are arranged alphabetically according to the coded messages as they appear on the system controller (e.g., CP, DS, and FD) or by the type of uncoded messages (i.e., scale,
ملخص المحتوى في الصفحة رقم 12
INTRODUCTION The conventions used in this guide The following conventions are used throughout this guide: • When keyed in, most commands can be shortened to three letters. For example, RESET may be entered as RES. Commands are shown in capital letters. • Variable numbers, letters, and words appear as lowercase italicized characters. These variables represent the actual characters you will see in system controller display messages or will enter in commands. For example, the command FEED cl
ملخص المحتوى في الصفحة رقم 13
1. 1CP (COMPRESS command) messages These messages may appear during the process of compressing the system disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter on managing LPS resources for additional information.) CP1010 Compress now restoring the print file The COMPRESS command was entered. The process has moved the print file to different area of the system disk. Action None CP1020 Now processing DP0 CP1030 Now processing DP1 CP1040 Now processing DP2 CP1050 N
ملخص المحتوى في الصفحة رقم 14
CP (COMPRESS COMMAND) MESSAGES CP2700 Invalid keyin The compress command was entered incorrectly. Action Reenter command correctly CP2710 Keyins are not allowed at this time Compress process has begun. System cannot process any other commands entered at this time. Action Wait for entire compress process to complete. Reenter command. CP2720 Invalid start command The COMPRESS start command was entered incorrectly. Action Reenter COMPRESS. CP7010 Unable to compress this disk. Use DSR - COMPRESS MO
ملخص المحتوى في الصفحة رقم 15
2. 2DSR (disk save and restore command) messages These messages may appear during the process of saving all disk files on tape or restoring all files to system disk from tape. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter on managing LPS resources for additional information.) DS1010 Save process complete DS1020 DSR is saving disk drive 0. DS1030 DSR is saving disk drive 1. DS1040 DSR is saving disk drive 2. DS1050 DSR is saving disk drive 3. The DSR command was
ملخص المحتوى في الصفحة رقم 16
DSR (DISK SAVE AND RESTORE COMMAND) MESSAGES DS8010 Tape error xxxx...DSR aborted The system has encountered a device error from which it was unable to recover after several attempts. DSR task is aborted. Action 1. Clean the tape drive and retry the task. (Refer to the maintenance chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.) 2. If the problem continues, replace the save tape. DS8020 Tape is read only...DSR aborted The tape is designed to be read but not written. Data can
ملخص المحتوى في الصفحة رقم 17
DSR (DISK SAVE AND RESTORE COMMAND) MESSAGES DS9040 System error...DSR aborted An unspecified hardware error has caused DSR task to abort. Action 1. Retry the DSR task. 2. If the problem continues, contact your systems specialist or Xerox Customer Service. DS9050 File structure integrity error on xx...DSR aborted The specified disk drive has a corrupt file structure. A format will be required. Action Reformat the system disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Referenc
ملخص المحتوى في الصفحة رقم 18
DSR (DISK SAVE AND RESTORE COMMAND) MESSAGES 2-4 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
ملخص المحتوى في الصفحة رقم 19
3. 3FD (forms compilation) messages These messages may appear while forms are being compiled using Forms Description Language (FDL). (Refer to your DocuPrint 96/ DocuPrint 96MX LPS Forms Creation Guide for additional information.) FD0900 Operator-requested abort The ABORT command was entered. Compiling is stopped. Action None FD1000 All forms compiled. Forms compiler exiting The FDL file-name command was entered. Form(s) have been successfully compiled and the FDL compiling session is termina
ملخص المحتوى في الصفحة رقم 20
FD (FORMS COMPILATION) MESSAGES FD2720 Key-in too long. Reenter The name or word entered exceeds the permitted number of characters. Action Enter a different word within the permitted range. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Forms Creation Guide.) FD2730 Parameter too long. Reenter The command parameter entered contained more characters than permitted. Action Reenter the command with an allowable number of characters. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Forms Creati
