Xerox 701P47853 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

November 2007
701P47853



Xerox 82xx/83xx Wide Format Printer

Hints and Tips

ملخص المحتوى في الصفحة رقم 2

Prepared by: Xerox Corporation Global Knowledge and Language Services 800 Phillips Road, Bldg. 0218-01A Webster, New York 14580-9791 USA ©2007 by Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory judicial law or hereinafter granted, including without limitation, material generated from the software programs which are

ملخص المحتوى في الصفحة رقم 3

82xx/83xx Hints & Tips Paper Loading • If changing media types, perform a distance adjustment to ensure media advances at the right rate. An incorrect distance adjustment can result in banding or blurry lines and text. • When loading a roll of paper lay it on a clean temporary work surface. The roll may pick up lint or other contaminants if laid on carpet or the floor. • Ensure the paper roll and take up roll are set firmly on the winder and un-winder. If this is not done, the dr

ملخص المحتوى في الصفحة رقم 4

No Breaks in the Step Lines Breaks in the Step Lines Figure 1. Nozzle Check Test Pattern 2

ملخص المحتوى في الصفحة رقم 5

Troubleshooting • The ink level percentages are only estimates. One of the things to check if you are having image defects such as banding or voids is that there is ink in each of the cartridges. • To check Ink status use the up “menu” button > select “ink Status”, this menu will show percentages and can also be used to check presence of ink cartridges. • If the printer GFI power cord “trips” (turns off the power going to the printer), turn off the power switch on the printer (button

ملخص المحتوى في الصفحة رقم 6

This page has been intentionally left blank. 4

ملخص المحتوى في الصفحة رقم 7

ملخص المحتوى في الصفحة رقم 8