Tektronix 8.x دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

LaserWriter 8.x printer driver
You can use Apple’s LaserWriter driver version 8.x with a Phaser 340 printer.
Some applications, such as Aldus PageMaker 5.x, use the LaserWriter 8.x
driver instead of the Tektronix driver.
Installing the LaserWriter 8.x driver
Note During installation, the LaserWriter 8.x driver leaves other
versions of the LaserWriter driver intact, so this driver can
co-exist with the Tektronix driver.
Refer to the LaserWriter driver’s documentation, L

ملخص المحتوى في الصفحة رقم 2

3. Place the correct PPD file with other PPDs for the LaserWriter 8.x driver in the Printer Descriptions folder, in the Extensions folder, inside the System Folder. n Use the TK340171.PPD file with the standard version of the printer (with 17 fonts). n Use the TK340691.PPD file with the optional Plus configuration of the printer (with 69 fonts). Note If you are not sure of the number of fonts installed in your printer, the printer’s sta

ملخص المحتوى في الصفحة رقم 3

11. Click the Select PPD button; the Printer Descriptions folder in the Extensions folder, inside the System Folder, is displayed. 12. Select the PPD file you installed in Step 3, either TK340171.PPD or TK340691.PPD. 13. Make sure the information under Printer Model matches the PostScript Version information you got printer you have and the in Step 9. 14. Click Select. Note If the information under Printer Model is not an exact match, us

ملخص المحتوى في الصفحة رقم 4

16. Click OK in two dialog boxes and close the Chooser. 17. Open the Page Setup dialog box to see a pop-up menu with all of the printer’s supported paper sizes. 18. Open the Print dialog box and select the Paper Source. 19. In the Print dialog box, click the Options button to see the Print Options dialog box. There are printer-specific TekColor features listed at bottom of the dialog box. Source: 070-9099-00 C2