ملخص المحتوى في الصفحة رقم 1
Instruction Manual
In-Transit FlashLink Data Logger
In-Transit FlashLink Software
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Table of Contents INTRODUCTION ..........................................................................................1 In-Transit FlashLink Software Features .....................................................2 Data Logger Features..................................................................................3 SETUP............................................................................................................4 Minimum PC Requirements....................................
ملخص المحتوى في الصفحة رقم 4
Data Tag Information ............................................................................... 19 Downloading ............................................................................................ 20 Graphs and Reports.................................................................................. 24 Graphs ...................................................................................................... 24 Reports ...........................................................
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION The In-Transit FlashLink Data Logger is a single use instrument designed with a unique, patented communications feature via the PC’s parallel port, which allows an extremely fast data download (typically 760 data points per second). The 25-pin cable (included) connects FlashLink to your computer’s parallel (printer) port. . (A Serial Port Adapter is available for computers that do not have a parallel port) The PC time and date is used to track data history to the last data po
ملخص المحتوى في الصفحة رقم 6
In-Transit FlashLink Software Features • Single Windows-based user-friendly program for downloading, graphing, and reporting. • Patented design downloads 3800 data points in 5 seconds on average. • Capable of communicating through either Parallel or Serial Ports. • Patented shadow logging design. (See page 17). • Embedded independent email engine, eliminating the need for additional email software such as Microsoft Outlook. • Automatic file naming, point-and-click interface, single-po
ملخص المحتوى في الصفحة رقم 7
Data Logger Features • Non-volatile data memory – data can be recovered after power loss. • Standard 25-pin connector for downloading data to the PC; communicates with PC through parallel printer port. (Optional Serial Port Adapter Available) • Green and red LEDs indicate whether the data logger is in active mode or alarm mode. • Internal temperature sensor or external probe option • Patented utility packaging for hanging, probe storage, and PC access • Shock resistant ABS plastic case
ملخص المحتوى في الصفحة رقم 8
SETUP Minimum PC Requirements IBM (or compatible) 486 with 4 megabytes of memory. The In-Transit FlashLink Software runs on all versions of Windows (3.1, 95, 98, 2000, ME, XP and NT). It will also run on Windows LAN servers if the “client computers” use Windows 3.1, 95, or 98. Some brands of laptop computers may not be compatible with the In-Transit FlashLink Software. See page 36 of this manual for a list of compatible laptop computer models or call DeltaTRAK Customer Service for the
ملخص المحتوى في الصفحة رقم 9
Software Installation Instructions for Win 98/95/3.1 1. Check the date and time setup in your computer. It is extremely important to have the correct information in your computer before installing the program disk or downloading the data to the PC. 2. IF you have downloaded the software from www.DeltaTRAK.com, double click the FLITFULLx_x.exe icon; (x_x indicates the version #) click “Yes” to continue. Go to step 4. 3. If you have the Installation CD, insert the In-Transit FlashLink Sof
ملخص المحتوى في الصفحة رقم 10
6. Choose Destination Location: C:\Flash is automatically entered as the default directory. To change the destination, click on Browse. Select the directory you want, then click on Next to accept the settings and continue. 7. Select Program Folder: The “In-Transit FlashLink Software” folder is automatically entered as the default program folder. You can also select an existing folder from the list. Click on Next to accept the settings and continue. 8. Start Copying Files: The settin
ملخص المحتوى في الصفحة رقم 11
Instructions for Windows 2000, XP and NT To install FlashLink Program Manager Software on Windows 2000, XP and NT: *Network Users: See your LAN Administrator. 1. Restart the computer and log on as the Administrator. (You cannot install the software in of these Windows NT based systems without having Administrator access). 2. IF you have downloaded the software from www.DeltaTRAK.com, double click the FLITFULLx_x.exe icon; (x_x indicates the version #) click “Yes” to continue. Go to step
ملخص المحتوى في الصفحة رقم 12
Port Settings The parallel port drive will try to allocate the parallel port with FlashLink automatically with the first run of the FlashLink software under the following conditions: Standard port address assignment a) One parallel port configuration LPT1 address: 0x378 b) More than one parallel port configuration LPT1 address: 0x3BC LPT2 address: 0x378 LPT3 address: 0x278 In all non-standard cases the user has to specify explicitly the LPT address of the parallel port used with the
ملخص المحتوى في الصفحة رقم 13
1) First click “Customize” for the “Customize” setup screen 3) Click here to select the LPT and Base Address OR 4) Click here to use the 2) Then optional click Serial “SetPort” Port for “Port Adapter Settings” screen. Page 9
ملخص المحتوى في الصفحة رقم 14
Windows 98/95 To check your port settings in Windows 98/95/3.1, do the following: 1. Press start button, go to setting then control panel. 2. Double click on system icon. 3. Click on device manager tab. 4. Click on ports. 5. Double click on port you wish to use for FlashLink and write down port number. 6. Click on resources tab. 7. Write down first number of the first input/output range line. Should be something like 3BC. This is your base address. Then start your FlashLink Software a
ملخص المحتوى في الصفحة رقم 15
Windows NT To check your port settings in Windows NT, do the following: 1. Go to “Start”. 2. Choose “Programs”. 3. Choose “Administrative Tools”. 4. Choose “Window NT Diagnostic”. 5. Select the “Resources Tab”. 6. Select the “I/O port” button. This will display the port settings for LPT1 where the FlashLink can be accessed. They should look something like 03BC, write this down. Then start your FlashLink Software and select from the top menu “Customize”. Then click the “Set Port” butto
ملخص المحتوى في الصفحة رقم 16
Windows XP To check your port settings in Windows XP, do the following: 1. Go to “Start”. 2. Choose “Control Panel”. 3. Choose “Administrative Tools”. 4. Choose “Computer Management” 5. Double click “Device Manager” in the left quadrant. 6. Double click “Ports (COM & LPT)” icon in the right quadrant. 7. Double click “Printer Port (LPT1)” icon in the right quadrant. 8. Click the “Resources” tab. This will display the port settings for LPT1 where the FlashLink can be accessed. They s
ملخص المحتوى في الصفحة رقم 17
OPERATING INSTRUCTIONS Starting the Data Logger The data logger must be started by the shipper by inserting a ballpoint pen or other small blunt object into the start switch hole on the front of the data logger. The green LED will flash rapidly three times to indicate it started. If the green LED does not flash, press the start switch again. If the data logger still does not activate after three tries, contact your distributor or DeltaTRAK, Inc., for technical assistance. Main Screen Des
ملخص المحتوى في الصفحة رقم 18
Menu Bar File Customize Open Data File: Open an existing Select to set your preferences for (previously saved) data file on the company name, logo, on-line help, computer. temperature scale, and graph and reporting defaults. Proceed to Download Data: Download data page 14 for complete information from a data logger to the PC. on the Customize Screen. Proceed to page 15. NOTE: This can only be accessed View Current Status: Check the from the Main Menu. status of the data logger. P
ملخص المحتوى في الصفحة رقم 19
Customize Screen You can customize how the software works and the look of your data. The information can be updated or changed later, if desired. (Click “Customize” on the menu bar to open the window shown below.) Enter your company name Click here to Enter the file name for search and select your logo (it must be in from available .bmp format). Your .bmp files. logo will appear on the printed reports, if desired. Click here to select the temperature scale. Click to select
ملخص المحتوى في الصفحة رقم 20
Auto Backup Data files are automatically saved when they are downloaded. The directory is named Databack, and is automatically created in the program’s “Flash” directory with your first download. If the custom option “Always ask for backup file name” is checked (to check: click “Customize” on the top menu bar), you may use whatever naming convention you wish (Up to 8 characters). You will be prompted to name each file as it is saved. Choosing Cancel at this point will still save the f
