ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
FCC WARNING You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and foun
ملخص المحتوى في الصفحة رقم 4
◆ Contents ◆ Name of Parts ............................... 2 Ribbon Setting ..........………….. 11 Power .............................................. 6 Does not print correctly .............. 13 Computer Connection ................... 8 When error light is ON ............... 14 Paper Setting ................................. 9 Failure? ....................................... 15
ملخص المحتوى في الصفحة رقم 5
Name of Parts ■Front View Paper check Top cover window Operation switch Front cover Power switch ■Top cover .................... Open this cover when you set the paper. ■ Power switch .............. Press this switch to turn ON/OFF the printer. ■ Paper check window ... To check the status of paper. ■ Front cover ................. Open this cover to refill or set DIP-SW. ■ Operation switch • POWER .... When you turn
ملخص المحتوى في الصفحة رقم 6
Back View Fanfold paper set in place Power Optional interface Connector I/F Cover Connecter ■Power Connector ... Connects AC adapter. ■Optional interface Connecter ... Connects computer. ■Fanfold Paper set in place ... Open this to use fanfold paper.To open the folder, remove the Top Cover and release. ■I/F Cover ... It removes by exchange of an I/F board. ※ Handling of an I/F Cover
ملخص المحتوى في الصفحة رقم 7
■ Top Cover Open Driver for darkness Thermal head adjustment Paper holder Head Paper holder slide lever Sensor Platen roller Head Open/Close lever ■ Paper holder ... When you use a roll paper, set the paper here. You can adjust the width according to the paper size. ■ Paper holder slide lever .. Press this lever to adjust the paper holder width. ■ Head ................ Open this part to refill paper. ■ Head Open/Close lever .. Pres
ملخص المحتوى في الصفحة رقم 8
■ Front Cover Open Error number display Print darkness adjustment volume Sensor level DIP-SW ■ Print darkness adjustment volume .. You can finely adjust the darkness that is set in the Printer Setting screen. See the manual for details. ■ Sensor level ...... Do not use this. Only for used by service personnel. ■ DIP-SW ............ Appropriate settings are set according to your printer system environment. You can change the settings. See the manual
ملخص المحتوى في الصفحة رقم 9
Power Cable Connection 1 Connect the power cable with the main unit and AC adapter as shown in the figure. When you insert the AC adapter in the main unit, set the stopper firmly. 2 Plug in the power cable to the outlet. 3 Use a Two-prong adapter if only a two-prong outlet is available. Stopper 1 Connect the power cable with the main unit and AC adapter as shown in the figure. When you insert the AC adapter in the main unit, set
ملخص المحتوى في الصفحة رقم 10
Power Switch Power Switch Press the power switch at the front side of the main unit in the “|” direction. * When you turn on the power, the POWER light lights up. Please confirm this. When you turn off the printer, flip the switch to the “ ” direction. 7
ملخص المحتوى في الصفحة رقم 11
Computer Connection Connection example using Bi-directional parallel interface Use [Bi-directional parallel interface(sold separately)]. This printer operates by being connected to a computer. Turn off the power of the printer and connect to the computer with an interface cable connecting the bi-directional parallel interface connector at the rear panel of the printer. * If you are using a different optional interface b
ملخص المحتوى في الصفحة رقم 12
Paper Setting 1 Confirm the [PUSH] mark on the Left/Right side of the main unit. While depressing the mark on the cover, open the Top cover 2 Press the Head Open/Close lever to the direction as shown in Figure. Confirm that the head is detached from the platen roller part, then lift the head in the direction as shown in the Figure. 3 While pressing the paper holder slide lever, adjust the paper holder to the paper size. 4 Set the paper o
ملخص المحتوى في الصفحة رقم 13
5 Pull the paper,then pass under the sensor. 6 Close the head to the home position. 7 Depress the [PUSH] mark with finger until fixed firmly. Close the Top cover. 8 Set the top of the paper by pressing the [FEED] button. Finally, press the [ONLINE] button to change the online status. 10
ملخص المحتوى في الصفحة رقم 14
Ribbon Setting Thermal Transfer model OKI POS T400/T410 only. 1 Confirm the [PUSH] mark on the Left/Right side of the main unit. While depressing the mark on the cover, open the Top cover. 2 Press the Head Open/Close lever to the direction as shown in Figure. Confirm that the head is detached from the platen roller part, then lift the head in the direction as shown in the Figure. 3 While pressing the Ribbon Core Lock button, pull the ribbon core from the unit
ملخص المحتوى في الصفحة رقم 15
5 Please insert the ribbon core and fix firmly. * There are three depths according to the ribbon width. *Insert in the specified position by pressing the Lock button. 6 Pull out the ribbon along with the head. Stick the edge of the ribbon into the empty ribbon core by using a tape. Rotate the Ribbon Roll-up Knob in the clockwise direction and the wind up the ribbon several times. 7 Close the roller to the home position. Close the head to the home position.
ملخص المحتوى في الصفحة رقم 16
Does not print correctly Print error • Paper set correctly? ➞ Please set the paper correctly. • Platen roller clean? ➞ If the platen roller is not clean, clean it using the Cleaning Kit (refer to the manual). • Paper replenished regularly? ➞ If the edge of the paper does not set regularly, the paper cannot be fed to the printer correctly. Please be sure to use paper. • Is the data or signal from the computer is correct? ➞ Please turn off and on the power of the p
ملخص المحتوى في الصفحة رقم 17
• Paper set correctly? ➞ Please confirm that the paper is set correctly. • Platen roller clean? ➞ If the platen roller is not clean, clean the platen roller using the Cleaning Kit (refer to the manual). • Thermal head clean? No label is adhered to the head? ➞ If the thermal head is not clean, clean the head using the Cleaning Kit. ➞ If a label is adhered to the thermal head, remove the label. Please make sure not to remove the label using metal instruments such as a scre
ملخص المحتوى في الصفحة رقم 18
Failure? Please confirm the following before you decide it’s a mechanical failure. POWER light is not ON even if you turn on the machine. AC adapter and power cable are plugged in the outlet correctly? ➞ Plug in AC adapter and power cable into the outlet correctly. AC adapter is plugged in to the main unit correctly? ➞ Plug in the AC adapter to the main unit power connector firmly. No damages of the power cable? ➞ Replace the power cable. A new power cable is available
ملخص المحتوى في الصفحة رقم 19
AVERTISSEMENT DE LA FCC Les changements ou modifications qui ne sont expressément approuvés par la partie responsable d’assurer la conformité pourraient résilier votre droit d’utiliser l’équipement. Ce dispositif est conforme à la partie 15 de la réglementation FCC. Le fonctionnement est soumis aux deux conditions suivantes : 1) cet appareil ne doit pas provoquer d’interférences néfastes, et 2) cet appareil doit tolérer les interférences reçues, y compris celles qui risquent de provoque
ملخص المحتوى في الصفحة رقم 20
Contenu Noms des pièces .............................. 2 Réglage du ruban............................11 Alimentation..................................... 6 Impression incorrecte ....................13 Connexion ordinateur....................... 8 Témoin d’erreur allumé .................14 Réglage papier.................................. 9 Panne? . ..........................................15
