Lexmark 310 Series دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

*20C0070*
Setup troubleshooting
Symptom Diagnosis Solution
The Power light is not lit Is the power cord pushed all the way into the printer? 1 Disconnect the power cord from the wall outlet, and then from the printer.
2 Reconnect the power cord by pushing it all the way into the connector on the
printer, and then into the wall outlet.
3 Press Power.
Is the printer connected to a working electrical outlet? 1 Connect the printer to an electrical outlet that other electrical devices have been
usi

ملخص المحتوى في الصفحة رقم 2

Prepare the printer Load the index card Unpack the printer 3 2 1 Lift the paper support. Load the index card. Connect the power cord. Make sure the Power light is on. 1 2 1 2 Setup booklet User’s Guide Index card Press + to scroll to your language and then press Select. Power cord Color print cartridge Install the print cartridge 4 Open the access cover. Remove the sticker and tape from the Open the cartridge lid, insert the cartridge, Close the access cover. Press Select. 1 2 5 3 4 bottom of t