ملخص المحتوى في الصفحة رقم 1
LASER IMAGER
DRYPRO model 752
OPERATION MANUAL
CODE NO.
( ) ( )
CE
0463 UL , 0467
KONICA CORPORATION
ملخص المحتوى في الصفحة رقم 2
Blank page
ملخص المحتوى في الصفحة رقم 3
DRY LASER IMAGER DRYPRO MODEL 752 Table of Contents Introduction ................................................................................ ii Descriptions of Symbol Mark .....................................................iii Descriptions on Warning Label ................................................. iv Warning Label............................................................................ v Warning Label Location ............................................................ vi Sa
ملخص المحتوى في الصفحة رقم 4
Introduction Thank you for purchasing Dry Laser Imager DRYPRO model 752. The Dry Laser Imager DRYPRO model 752 makes all processing dried and improves the environment and the operability while maintaining high performance and high-quality images. • High-quality Image 1) Realizing super-sharpened images with the pixel size of 40 µm (min.) 2) Newly developing film that is most suitable for the imager and CR 3) Supporting 12-bit image input 4) Rendering high-quality images with advanc
ملخص المحتوى في الصفحة رقم 5
Descriptions of Symbol Mark The meaning of following symbol marks described in this equipment and this manual is as the following table. Symbol mark Descriptions of symbol mark Attention Consult accompanying document. Protective earth (ground) OFF (power: disconnection from the mains) ON (power: connection to the mains) ON (only for a part of equipment) Alternating current DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 iii
ملخص المحتوى في الصفحة رقم 6
Descriptions on Warning Label " Descriptions on warning (caution label) # Caution labels imply the degree of the risk that may arise from incorrect use of this product. # There are three degrees of caution labels, and each is used depending on the level of risk and damage caused by incorrect use and mishandling. DANGER: If failed to avoid the risk, this implies the imminent danger level that may lead to serious injury including a loss of life. WARNING: If failed to avoid the risk, this imp
ملخص المحتوى في الصفحة رقم 7
Warning Label (1) (2) (3) [NOTE] : If the contents of this page are not legible, order a new manual. DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 v
ملخص المحتوى في الصفحة رقم 8
Warning Label Location 1) Front (1) (2) 2) Rear (3) [NOTE] : If the contents of this page are not legible, order a new manual. vi DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
ملخص المحتوى في الصفحة رقم 9
Safety Caution Before operating this device, be sure to read Safety Caution. Be sure to observe the safety cautions described here as they are very important for safety. " Cautions on installation Never attempt to modify the device. If you modify the device, this may cause a breakdown, electric shock, or fire. For installation, contact a sales office where you purchased this device or a service person. If you install the device and there are any problems in installation, thi
ملخص المحتوى في الصفحة رقم 10
Safety Caution " Cautions on use Never open or close any covers other than the specified in this Operation Manual. High voltage may be applied on some sections in the device. If you touch them acciden- tally, you may suffer burns or an electric shock. When replacing FILTER or removing film jams in the discharge section, follow the procedure in this Operation Manual; otherwise, a fire may be caused. When touching the LCD (glass) on the control panel, do not give a strong m
ملخص المحتوى في الصفحة رقم 11
Safety Caution When unplugging the power cable, do not pull it; otherwise, the inner cable may be broken, and this may cause heating or a fire. Do not let this device exposed to water by cleaning the device with a wet cloth or placing the vase containing water on the device, etc; otherwise, you may suffer an electric shock due to a leakage of currents. Before you clean the device, be sure to stop operating it, and unplug the power cable or turn the breaker OFF; otherwise, you ma
ملخص المحتوى في الصفحة رقم 12
Precaution " Disposal Precaution When disposing the following used parts, accept the regulations of each local government. 1) The DRYPRO 752 itself. 2) The packaging materials for DRYPRO 752. 3) The photosensitive materials used on the DRYPRO 752. 4) The lead and lithium batteries inside the DRYPRO 752, which can be hazardous and must be disposed properly. " Precaution on Installation Location Be sure to observe the following conditions for the installation location of this device. By ins
ملخص المحتوى في الصفحة رقم 13
1. Name of Each Component 1-1. Main Body " Front View Filter unit cover Air intake Control panel Start switch Upper tray Lower tray Front cover Lower cover Breaker Air intake DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 1
ملخص المحتوى في الصفحة رقم 14
1-1.Main Body " Rear View Air outlet Air intake Air outlet Air outlet Power connector Air outlet Power cable Ethernet port (RJ45) 2 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
ملخص المحتوى في الصفحة رقم 15
1-2.Sorter LiS-752 (option) 1-2. Sorter LiS-752 (option) Bins Inlet guide Sorter left cover Front cover DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 3
ملخص المحتوى في الصفحة رقم 16
2. Structure (7) (8) (10) (6) (1) (5) (2) (11) (3) (4) (9) - Sorter LiS-752 is optional device. (1) Supply section (6) HPRO (Heat Processing) section Picks up each sheet of film from the tray unit, and sends Processes the exposed film by heating. to the descent transport section. (7) Cooling/Discharge section (2) Descent transport section Cools the heat-processed film and discharges it. Sends the picked-up film in the supply section to the (8) Air-cooling section position
ملخص المحتوى في الصفحة رقم 17
3. How To Operate The operation, control and settings of this device can be made by using the control panel located on the main unit. The following shows the operating procedures. 3-1. Control Panel " Description on screen (1) (2) (11) (8) (3) (12) (4) (10) (9) (13) (7) (6) (5) (1) ON LINE/OFF LINE Indication (8) FILM SET / TRAY OPEN / CALIBRATION Key Displays the ON LINE/OFF LINE status of the device. The FILM SET key opens the tray when the film tray becomes emp
ملخص المحتوى في الصفحة رقم 18
3-2.Start-up Operation 3-2. Start-up Operation Follow the procedure below to turn on the power of the equipment. (1) Turn ON the power of the breaker located at the lower-right of the device. Breaker (2) Press the start switch below the control panel. CAUTION Pressing the start switch again turns OFF the power. In this case, press the start switch again. Start switch (3) The startup screen will appear. (4) The WARMING UP screen will appear in approx. 2 minutes. NOTE • Although printing cann
ملخص المحتوى في الصفحة رقم 19
3-2.Start-up Operation (5) When READY appears on the message column, printing can be made. NOTE Use the START TIMER function to set the device to READY on the specified time without pressing the start switch. (Refer to page 18 for details on how to set the START TIMER function.) " Power saving mode The DRYPRO has the power saving mode that saves power consumption automatically after no data is printed or no printing data is received for a specified time. When the DRYPRO goes into the power saving
ملخص المحتوى في الصفحة رقم 20
3-3.Shut-down Operation 3-3. Shut-down Operation Following the procedure below to shut down the device. (1) Touch [OPERATION OFF] on the control panel. CAUTION Be sure to check that PRINT QUEUE shows "000" before performing the shut-down operation. If you shut down the device when PRINT QUEUE shows any number other than "000", the remain- ing data that has not printed yet will be printed out next time the device starts up. (2) The confirm screen of OPERATION OFF appears. Different confirm screens
