Fujitsu FTP-621MCL302 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM, WITH AVAILABLE CUTTER
FTP-621MCL301/302
n OVERVIEW
This thermal printer (driven by 24 VDC) and cutter provide high speed
printing for 2- inch wide paper (60 mm). This printer is small in size, light
weight, and has low power consumption. The print head is designed with
open construction for easy maintenance.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, label printers, measuring devic

ملخص المحتوى في الصفحة رقم 2

FTP-621MCL301/302 n DESIGNATION Item Part number Front paper insertion type FTP-621MCL301 Printer mechanism Rear paper insertion type (supports thick paper) FTP-621MCL302 Cutter FTP-621CT001 FTP-621DCL012 Interface board Micro Controller Unit FTP-621CU102 LSI Gate Array FTP-633GA101 n GENERAL SPECIFICATIONS Item Specifications Printing method Thermal-sensitive line dot method Dot structure 448 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots

ملخص المحتوى في الصفحة رقم 3

FTP-621MCL301/302 (Continued) Item Specifications 2 24 VDC ± 5%, average:* 0.25 (1.29) A (at 25 mm/s printing speed, 25% printing ratio) For head 0.43 (1.72) A (at 50 mm/s printing speed, 25% printing ratio) 1.66 (3.01) A (at 100 mm/s printing speed, 25% printing ratio) ( ): Peak Power supply For motor 24VDC ± 5%, 1.0 A maximum For logic 5VDC ± 5%, 0.5 A maximum Weight Mechanism with cutter: approx. 440 g. Interface board: approx. 100 g Mechanism + cutter 107 (W) × 60 (D) × 71.0 (H) mm (ex

ملخص المحتوى في الصفحة رقم 4

FTP-621MCL301/302 n DIMENSIONS Printer mechanism with cutter 2.5 (Mounting hole) JAPAN 35.5 (Mounting hole) 40.5 7.5 (300) 68 (At cutter open) 12 60 Unit: mm 4 (Mounting screw) 2-M3 Burring 107 21.9 81.2 (Mounting hole) 14.2 39.6 (Center of paper & connector) 71 (76) Y-Y SECTION Y Paper insertion Y 69.8 Note: all dimensions are nominal value. Paper insertion 330 25.4 11.8

ملخص المحتوى في الصفحة رقم 5

FTP-621MCL301/302 Interface board 139.7 129.6 113.1 73.7 22.9 14.0 4—ø3.6 (5.1) CN9 CN3 CN4 CN2 CN7 88.9 28.0 78.8 CN11 25.4 CN5 CN6 CN1 CN10 (5.1) (5.1) 14.0 31.8 15.3 (5.1) (5.1) 88.9 17 Height of devices side 23.6 1.6 5 Height of soler side Unit: mm n INTERFACE, COMMAND, OPTIONS Please refer to the FTP-621DCL002/012 DATA SHEET for Interface, Command, and Options. 5