Canon SC A20 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Canon® A20 Remanufacturing Instructions
Oasis Imaging Products Inc. Technical Support (800) 322 – 8992 ext 110


Reference Information:
OEM PN: F41-2302-120
OEM Yield: 3,000 @ 5.5%

Recommended Tools:
®
Tamperproof Torx screw bit
Phillips head screwdriver
Pin puller
Flat head screwdriver

Approximate Remanufacturing Time: Figure 1
20-25 min.

Instructions:

1. Remove the right side end cap (two tamperproof torx style screws -Fig. 1).

2. Remove the shutter actuat

ملخص المحتوى في الصفحة رقم 2

b. Insert a toner hoper seal. c. Fill the toner hopper with toner. Insert toner hopper plug. 9. Remove the corona assembly screw. Remove and clean the corona assembly (Fig. 7). Pry the corona assembly to the left and lift it out. There are two industry methods of cleaning this assembly, manual and ultrasonic. ® The manual method requires using a Scotchbrite pad. Use a small piece of the pad and gently move the pad up and down the length of the wire. The ultrasoni