Bahco Fixed-Setting Torque Screwdrivers BE-6990-IP دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

BE-6990-IP
Fixed-Setting Torque Screwdrivers
® ®
for TORX and TORX PLUS head screws
Applications
Torque Screwdriver BE-6990-IP was specially developed for changing
cutting plates on automatic cutting machines, in order to ensure consistent
accurate cutting.
Incorrectly tightened screws produce an untidy cut surface and cause the
cutting plates to wear out quickly. Excessively high tightening torque leads
to rapid screw fracture.
Operation
Torque Screwdriver BE-6990-IP uses a built-in spring. I

ملخص المحتوى في الصفحة رقم 2

Use Nm Nm If the screwdriver is turned in the direction of tightening, you hear a click when the correct torque has been reached. When undoing screws, there is no torque limit. 1 2 = = Correct size 3 The screwdriver has a fixed torque, which is matched to the actual size of the blade. The size is specified by the identification on the blade and on the handle of the screwdriver. Changing the blade As required, the blade can be removed from the handle and replaced by a new blade. Care must be