American Power Conversion ES 400, ES 550, ES 700 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

®
Back-UPS ES 400/550/700
User’s Guide
Connect Battery
For safety, the Back-UPS ES is shipped with one battery wire disconnected. The Back-UPS ES will not operate until the wire is connected to the touch
safe battery terminal.
1
NOTE: Small sparks may occur during battery connection. This is normal.
TURN the Back-UPS ES over and LIFT the battery out of the compartment Slide the battery compartment cover
12
slide the battery compartme

ملخص المحتوى في الصفحة رقم 2

Use the table below to solve minor Back-UPS ES installation or operation problems. Consult APC Online Technical Support or call APC Troubleshooting Technical Support for assistance with problems that cannot be resolved using the table below: Problem Solution Problem Solution Problem Probable Cause Solution Battery is disconnected or utility power is not available at Connect the battery (see Connect Battery) and ensure power is available at the wall Back-UPS ES will not turn on. the wall outlet.