Tripp Lite SU16KRT8 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model Number: SU16KRT8
SmartOnline 16kVA On-Line Double-Conversion UPS, N+1, 12U Rack/Tower, 200-240V L6-20R L6-30R outlets

Highlights
16kVA / 16,000VA / 14,400W on-line double-conversion UPS, 0.9 power factor
200/208/220/230/240V 50/60Hz output, Economy mode option
Hot-swap power & battery modules, N+1 fault tolerance at loads up to 8kVA
USB, RS232, EPO ports, Support for SNMP/W

ملخص المحتوى في الصفحة رقم 2

Supports Emergency Power Off (EPO) via built-in interface Front panel LEDs and LCD readout with scroll controls LED / LCD display panel rotates for viewing in rackmount or tower configurations External battery packs are field replaceable and hot swappable Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating) Specifications OUTPUT Output Volt Amp 16000 Capacity (VA) Output kVA capacity 16 (kVA) Output Watt 14400 Capacity (watts) Output kW capacity 14.4 Output

ملخص المحتوى في الصفحة رقم 3

UPS input Hardwire connection type UPS input 3 wire single phase input (L1, L2, G) connection description Recommended 100A @ 200V-240V (L, N, PE), or 100A @ 200V, 208V, or 240V (L1, L2, G) Electrical Service Phase Single-Phase BATTERY Full load runtime 5.5 minutes (14,400 watts) (minutes) Half load runtime 13.5 minutes (7200 watts) (minutes) Expandable battery Runtime is expandable with external battery packs runtime External battery BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH;

ملخص المحتوى في الصفحة رقم 4

EMI / RFI AC noise Yes suppression PHYSICAL Installation form 4 post 19 inch rackmount factors supported with included accessories Included mounting 4 sets of adjustable 4 post rack rails included (one for each included 3U module) accessory description Installation form 2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND) factors supported with optional accessories Optional mounting Qty 4 2POSTRMKITHD required for 2 post rackmount installation; Qty 2 2-9USTAND required for tower installation acces

ملخص المحتوى في الصفحة رقم 5

UPS Shipping 36 x 40.25 x 51 dimensions (height x width x depth / inches) UPS Shipping 91.4 x 102.2 x 129.5 dimensions (height x width x depth / cm) Shipping weight (lbs) 600 Shipping weight (kg) 272.4 Cooling method Fans UPS housing Steel material ENVIRONMENTAL Operating +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. Temperature Range Storage +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius. Temperature Range Relative Humidity 0 to 95%, non-condensing AC mode BTU / hr. 546

ملخص المحتوى في الصفحة رقم 6

Low voltage transfer 100V to battery power (setpoint) High voltage transfer 300V to battery power (setpoint) SPECIAL FEATURES Cold Start (startup in Cold-start operation supported battery mode during a power failure) Economy mode Optional economy mode enables high efficiency bypass operation with a maximum output voltage variation of operation +/-10%. Double conversion mode is automatically restored as mains voltage varies beyond +/-10% with less than 1 millisecond transfer time between modes. H

ملخص المحتوى في الصفحة رقم 7

2POSTRMKITHD Enables 2-Post Rackmount Installation of 3U and Larger UPS, Transformer and Battery 1 Pack Components 2-9USTAND Enables Tower Placement of Rackmount UPS Systems 1 MODBUSCARD For remote monitoring and control via MODBUS protocol 1 RELAYIOCARD Programmable Relay I/O Card 1 RELAYIOMINI 3 Relay I/O Mini-module 1 PDUMH20HV Single-Phase Metered PDU, 20A 200-240V, 1U Horizontal Rackmount, C19 & C13 1 outlets, C20 input with NEMA L6-20P adapter PDUMV20HVNET Single-Phase Switched PDU, 20A