Emerson Liebert GXT2-10KIPPCBL دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

™
®
Liebert GXT2-10KIPPCBL
Quick-Start Guide
1. Disconnect the Liebert GXT2-10000RT208™ from all electri-
Warnings
cal inputs.
2. Remove the top cover from the terminal block cover on the & Cautions
rear of the UPS. Set all screws aside for reinstallation.
This input power cable
3. Use a screwdriver or similar tool to remove the knockout.
must be installed only
4. Slip the locknut onto the input power cable.
by properly trained and
5. Thread the input power cable through the knockout hole.
q

ملخص المحتوى في الصفحة رقم 2

Proper Input Power Connection The GXT2-10KIPPCBL is an IEC 309-60A, L1-L2-N-G configuration, input power cable and plug designed to work with the Liebert GXT2-10000RT208. This input plug should be connected to a power outlet with an IEC 309-60A, L1-L2-N-G configuration. Miswiring power to the input terminal block or connecting to single-phase voltages (L-N-G only) may damage the UPS. NOTe For startup instructions, refer to the user manual for the Liebert GXT2-10000RT208, SL-23444, available