CyberPower Systems 2200E دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

3. Charge the Battery
Your new UPS may be used immediately upon receipt. However charge loss may occur during

shipping and storage. So charging the battery for at least 8 hours is recommended to insure that
the battery is fully charged. (To recharge the battery, simply leave the unit plugged into an AC
outlet.)
This UPS can be charged even when UPS is not turn on.

4. Connect to AC

Use German power cord to connect the UPS to a wall
outlet. Please avoid using extension co

ملخص المحتوى في الصفحة رقم 2

Functional Test TECHNICAL SPECIFICATIONS AC Mode The UPS delivers power to the loads derived from the utility and maintains proper battery charge. It also Model Value 1200E Value 1500E Value 2200E regulates the output voltage to within a narrow range. Capacity (VA) 1200VA 1500VA 2200VA Capacity (Watts) 720W 900W 1320W On-Battery Mode Input The UPS operates on battery when the line voltage or frequency has fallen outside the limits. Local Input Voltage Range 160VAC~270V